Bartscher 116050 User guide

FR
Fours mixtes à vapeur série V
GB
Combi steamer serie V
DE
Kombidämpfer Serie V
116050 / V 5230 116060 / V 6640
116070 / V 10640
V1/0215

- 39 -
ENGLISH
Translation
of the original instruction manual
Table of contents
1.Safety ........................................................................................................................ 40
1.1 Safety instructions............................................................................................... 40
1.2 Key to symbols.................................................................................................... 41
1.3 Hazard sources................................................................................................... 42
1.4 Proper use........................................................................................................... 44
2. General information................................................................................................ 45
2.1 Liability and Warrantees...................................................................................... 45
2.2 Copyright protection............................................................................................ 45
2.3 Declaration of conformity..................................................................................... 45
3. Transport, packaging and storage......................................................................... 46
3.1 Delivery check..................................................................................................... 46
3.2 Packaging ........................................................................................................... 46
3.3 Storage................................................................................................................ 46
4. Technical data......................................................................................................... 47
4.1 Overview of parts ................................................................................................ 47
4.2 Technical specification........................................................................................ 48
5. Installation and operation....................................................................................... 53
5.1 Instructions for the installer................................................................................ 53
5.1.1 Instructions................................................................................................ 53
5.1.2 Preparation................................................................................................ 53
5.1.3 Place of installation.................................................................................... 54
5.1.4 Preparing to Install..................................................................................... 55
5.1.5 Power supply connection........................................................................... 56
5.1.6 Water connection....................................................................................... 58
5.1.7 Water outlet............................................................................................... 59
5.1.8 Steam outlet vent....................................................................................... 59
5.2 Operation........................................................................................................... 60
5.2.1 Safety tips for the user............................................................................... 60
5.2.2 First use..................................................................................................... 61
5.2.3 Operation elements / Functions the buttons and keys............................... 62
5.3 Cooking instructions........................................................................................... 68
6. Cleaning and maintenance..................................................................................... 71
6.1 Standard cleaning and maintenance................................................................... 71
6.2 Special maintenance........................................................................................... 74
7. Waste disposal........................................................................................................ 76
GB/UK

- 40 -
Read this instruction manual before using and
keep them available at all times!
This instruction manual contains information about the installation, operation and
maintenance of the device and should be consulted as an important source of
information and reference guide.
Awareness of the safety instructions and instructions for use in this manual will ensure
the safe and correct use of the device.
In addition to the information given here, you should comply with any local Health and
safety Controls and generally applicable safety regulations.
The instruction manual forms part of the product and should be kept near the device
and easily accessible for anyone carrying out the installation, servicing, maintenance or
cleaning.
1.Safety
This device is designed in accordance with the presently applicable technological
standards. However, the device can pose a danger if handled improperly and
inappropriately.
All persons using the device must follow the recommendations and instructions
in this instruction manual.
1.1 Safety instructions
•Please keep these instructions and give them to future owners of the device.
•Preserve this manual safely. When passing on/selling the device to a third party, the
manuals must be handed over along with the device.
•This device may only be operated in technically proper and safe condition.
•The device is not intended for use by individuals (including children) with physical or
mental disabilities, insufficient experience, and/or insufficient knowledge unless such
persons are under the care of a person responsible for their safety or have received
instructions regarding appropriate use of the device.
•Children should be observed to ensure that they are not playing with the device.
•Only a qualified technician and using original spare parts and accessories should
carry out repairs and maintenance of the device. Do not attempt to repair the
device yourself.
•Do not use any accessory or spare parts that have not been recommended by the
manufacturer. These can be dangerous for the user or lead to damages of the
device or personal injury, and further, the warranty expires.

- 41 -
•To prevent hazards and to ensure optimum efficiency, no modifications or alterations
to the device that are not explicitly approved by the manufacturer may be undertaken.
•Never allow the power cable to come into contact with heat sources or sharp edges.
The power cable should not hang over the side of the working surface. Ensure that no
one can step on or trip over the cable.
•The power cable must not be folded, bent or tangled, and must always remain fully
unrolled.
•Never place the device or other objects on the power cable.
•Do not lay the cable over carpets or heat insulations. Do not cover the cable.
Keep away the cable from operating range and do not dunk it into water.
•Inspect the power cable regularly for damage. Never use the device if the cable is
damaged. If the power cable is damaged, have an authorised service center or
qualified electrician replace it.
•The device is not adapted for use with an external timer or remote control.
•Never leave the device unattended when in use.
•Do not move or tilt the device when in operation.
•Only use the device indoors.
1.2 Key to symbols
In this manual, symbols are used to highlight important safety instructions and any
advice relating to the device. The instructions should be followed very carefully to avoid
any risk of accident, personal injury or material damage.
WARNING!
This symbol highlights hazards which could lead to injury.
To avoid them please follow the instructions very carefully and proceed with
particular attention in these cases.
WARNING!
This symbol highlights dangerous situations which could lead to injury or death.
To avoid them please follow the instructions very carefully and proceed with
particular attention in these cases.

- 42 -
CAUTION!
This symbol highlights dangerous situations which could lead to light
injuries, or damage, malfunction, and/or destruction of the device.
To avoid them please follow the instructions very carefully and proceed
with particular attention in these cases.
NOTE!
This symbol highlights recommendations and information aimed for
effective and trouble-free device operation.
1.3 Hazard sources
DANGER!
Electric shock hazard!
To avoid the hazard results please follow the safety instructions below.
Do not use the device in case of incorrect operation, damages or dropping on the
floor. When the cable is damaged it should be replaced by the service company or
qualified electrician in order to avoid the hazards.
The supply cable must be disconnected from the socket only by pulling the plug.
Never carry or lift the device by the supply cable.
In any case do not open the device housing. In case of electrical or mechanical
modifications the electric shock hazard will occur.
Never immerse the plug in water or other liquids.
Do not use any acid agents and make sure no water ingresses the device.
Never operate the device with moist hands or standing on wet floor.
Remove the plug from its socket:
-when the device is not used,
-in case of anomalies during operation,
-before cleaning.

- 43 -
DANGER!
Suffocation hazard!
Prevent access of children to the package materials like plastic bags and
foamed polystyrene elements.
The temperatures of food containers or other objects during and after cooking can
be very high; be particularly careful when handling them to avoid burns. You may
only grasp them wearing protective gloves.
Open the device door with particular caution: There is a risk of burns by escaping
high temperature steam.
When using a core temperature sensor, before removing baking trays from the
device make sure that the sensor has been removed from the food and forms no
obstacle.
The outside surfaces of the device may reach a temperature
exceeding 60 °C. To avoid burns, do not touch the areas or parts
marked with this symbol.
WARNING!
Risk of fire or explosion!
In case of improper use of the device, inflammation of the content may cause a risk of
fire or explosion.
To avoid the risk, follow these safety instructions:
•Do not put any flammable objects and spirit-based food into the device: they may
cause spontaneous combustion and fire which in turn can lead to explosions.
•Never leave easily inflammable materials near the device.
•Do not deposit or use any flammable substances near the device.

- 44 -
CAUTION!
•Avoid salting dishes in the combi steamer cooking chamber. If you cannot avoid this,
make sure to clean it as soon as possible since salt may damage the cooking
chamber.
•Use your fingers to operate the control panel; using any other object may damage
the device and result in voiding the guarantee.
1.4 Proper use
CAUTION!
This device has been designed and built for commercial use only
and should be operated by qualified personnel only.
The operational safety of the device is assured only in case of proper use, according
to the operation manual.
All technical activities like installation and maintenance must be performed by the
qualified service personnel only.
The combi steamer is intended only for the preparation of certain food:
-baking fresh and frozen confectionery products and bread;
-heating all kinds of fresh and frozen food products;
-steaming vegetables, meat and fish;
-the option of cooking in the vacuum may be used only with the appropriate bag;
-maintaining the temperature of chilled and frozen meals.
CAUTION!
Any use going beyond the intended purpose and/or any different use of the
device is forbidden and is not considered as conventional.
Any claims against the manufacturer or his authorized representative as a
consequence of experiencing damages resulting from unconventional use
are impossible.
The operator is liable for all damages resulting from inappropriate use.

- 45 -
2. General information
2.1 Liability and Warrantees
All the information and instructions in this manual take into account standard safety
regulations, current levels of technical engineering as well as the expertise and
experience we have developed over the years.
The instruction manual was translated with all due care and attention. However, we do
not accept liability for any translation errors. The German version of this instruction
manual is definitive.
If the delivery consists of a special model, the actual scope of delivery may differ from
the descriptions and illustrations in this manual. This is also the case for special orders
or when the device has been modified in line with new technology.
CAUTION!
Read this manual carefully and thoroughly before any operation
of the device, and especially before turning it on!
Manufacturer is not liable for any damages or faults caused by:
-violation of advice concerning operation and cleaning;
-use other than designed;
-alterations made by user;
-use of inadequate spare parts.
We reserve the right to make technical changes for purposes of developing and improving
the useful properties.
2.2 Copyright protection
The instruction manual including any texts, drawings, images or other illustrations is
copyright. No part of this publication may be reproduced, transmitted or used in any
form or by any means without permission in writing from the manufacturer. Any person
who commits any unauthorized act in relation to this publication shall be liable to claims
for damages. All rights reserved.
NOTE!
The contents, texts, drawings, pictures and any other illustrations are
copyright and subject to other protection rights. Any person unlawfully
using this publication is liable to criminal prosecution.
2.3 Declaration of conformity
The device complies with the current standards and directives of the EU.
We certify this in the EC declaration of conformity. If required we will be
glad to send you the according declaration of conformity.

- 46 -
3. Transport, packaging and storage
3.1 Delivery check
Please check the delivery upon completeness and transport damage immediately
after receipt. In case of visible damage do not accept or accept the delivery with
reservation only.
Note the extent of damage on the carrier’s bill of delivery. Trigger off the complaint.
Hidden damages should be reclaimed immediately after notice, as claims for damages
can only be asserted within the effective period for complaints.
3.2 Packaging
Please do not throw away the covering carton of your device as it might be useful for
storage purposes, when moving or, in case of damages, when the device must be sent
back to a repair center. The outer and inner packing material should be removed
completely from the device before installation.
NOTE!
If you liked to dispose the packing, consider the regulations applicable in
your country. Supply re-usable packing materials to the recycling.
Please inspect the device upon completeness. In case any part is missing please
contact our customer service center immediately.
3.3 Storage
Keep the package closed until installation and under consideration of the outside
indicated positioning- and storage markings.
Packages should be stored under consideration of the following:
-Do not store outdoors.
-Keep it dry and dust-free.
-Do not expose it to aggressive media.
-Do not expose it to direct sunlight.
-Avoid mechanical shocks and vibration.
-In case of longer storage (> 3 months) make sure you check
the state of the packaging and the parts regularly.
If required refresh or renew.

- 47 -
4. Technical data
4.1 Overview of parts
①
Housing
⑦
Tray
②
Control panel
⑧
Guiding rails
③
Safety lock device
⑨
Device door
④
Height adjustable feet
⑩
Door handle
⑤
Drain
⑪
Fan
⑥
Grid
⑫
Grease filter
⑧
⑦
①
⑨
⑩
⑤
⑪
⑥
④
③
⑫
②

- 48 -
4.2 Technical specification
Properties of combi steamers series V
Model CNS
Electronic control with 99 programmes and up to 9 phases in each programme
Functions: convection, steaming, combi steaming
Reversing engine direction (clockwise and counter-clockwise rotation)
for an optimal cooking chamber temperature
6 speed adjustable fan
Steam generation through direct injection
Illuminated cooking chamber
Convenient side-loading tray
Front-side connection for core temperature sensor
LED indicators for temperature, time, humidity, programme, core temperature
Prepared for attaching a core temperature sensor
Double door glazing, inner door can be opened easily for cleaning
Removable support rails
Combi steamer V 5230
up to 5 x 2/3 GN
Capacity of up to 5 x 2/3 GN
Distance between insertions 75 mm
Temperature range: 0 °C to 260 °C
Connection to water supply 3/4“
Power: 3.3 kW / 230 V 50-60 Hz 1 NAC - plug-in
Size: W 700 x D 780 x H 613 mm
Weight: 52.2 kg
Code-No. 116050
Delivery includes 1 grid 2/3 GN, 1 baking tray 2/3 GN, 1 grease filter,
water supply hose, drain hose

- 49 -
Combi steamer V 6640
up to 6 x 600x400
Capacity of up to 6 x 600 x 400 mm
Distance between insertions 75 mm
Temperature range: 0 °C to 260 °C
Steam control system: guarantees a constant cooking space atmosphere
Adjustable steam extractor
Connection to water supply 3/4“
Power: 9.6 kW / 400 V 50-60 Hz 3 NAC
Size: W 925 x D 955 x H 837 mm
Weight: 97.6 kg
Code-No. 116060
Delivery includes 1 grid 600x400, 1 baking tray 600x400, 1 grease filter,
water supply hose, drain hose
Combi steamer V 10640
up to 10 x 600x400
Capacity of up to 10 x 600 x 400 mm
Distance between insertions 75 mm
Temperature range: 0 °C to 260 °C
Steam control system: guarantees a constant cooking space atmosphere
Adjustable steam extractor
Connection to water supply 3/4“
Power: 14.4 kW / 400 V 50-60 Hz 3 NAC
Size: W 925 x D 955 x H 1120 mm
Weight: 133 kg
Code-No. 116080
Delivery includes 1 grid 600x400, 1 baking tray 600x400, 1 grease filter,
water supply hose, drain hose
We reserve the right to make technical changes!

- 50 -
Protective devices
The device is equipped with the following protective and safety systems:
Door microswitch
The microswitch interrupts the device operation after opening the door: both the
heating system and the fan(s) are turned off. After closing the door the interrupted
cycle is continued.
It is forbidden to manually activate the microswitch when the door is opened.
Motor overheating protection
The fan motor is equipped with overheating protection which interrupts the operation
in case of overheating. The fan motor operation is restored automatically when the
temperature drops to a value in the safe range.
Safety thermostat of the cooking chamber
When the temperature in the cooking chamber reaches 350°C, the safety thermostat
opens the supply circuit of the device heaters.
CAUTION!
The safety thermostat must be reactivated by the technical service personnel
as its operation indicates that other elements must be inspected.

- 51 -
Auxiliary equipment (not included in the delivery)
Manual shower
• Hose length 2 m
• 1/2” cut-off valve for rigid water connection
• Handle for fixing on the combi steamer compact
Code-No. 116005
Core temperature sensor
for combi steamers series V
• Cable length: ca. 1.8 m
• Weight: 0.14 kg
Code-No. 116071
Pressure limiter for the combi steamer compact
devices
• Made from chrome-plated brass, connection 3/4”
• Initial setpoint 3 bar, adjustment from 1 to 6 bar
• Maximum inlet pressure 16 bar
• Maximum operational temperature 65°C
• Weight: 0.4 kg
Code-No. 533051
1 pair of GN guiding rails
for use of 7 baking trays 1/1GN
Suitable for combi steamers 116060
Stainless steel
Distance between insertions 50 mm
Weight: 3.2 kg
Code-No. 116073

- 52 -
1 pair of GN guiding rails
for use of 12 baking trays 1/1GN
Suitable for combi steamers 116080
Stainless steel
Distance between insertions 50 mm
Weight: 5.2 kg
Code-No. 116074
Extraction hood
for combi steamers series V
Suitable for installation for combi
steamers: 116060, 116080
Stainless steel
Stainless steel filter
On/off switch
Power:
0.145 kW / 230 V 50 Hz
Size: W 925 x D 1000 x H 235 mm
Weight: 34.4 kg
Code-No. 116099
Base unit
for combi steamers series V
116060, 116080
CNS 18/10
Capacity: 10 x GN 1/1
Size: W 920 x D 665 x H 800 mm
Weight: 18.6 kg
Code-No. 115072

- 53 -
5. Installation and operation
5.1 Instructions for the installer
CAUTION!
Any works related to the installation, connection and maintenance of the
device may only be carried out by a qualified and licensed technician in
accordance with the applicable international, national and local regulations.
5.1.1 Instructions
•Read this instruction manual carefully before installing and starting the device.
•At all stages of the installation, assembly, operation and maintenance, the works
should be performed by qualified personnel who meet the requirements for
professional training (approved by the manufacturer or vendor), and taking
into account the applicable legislation of the country of installation and
regulations on product safety and safety at work.
•Improper installation, operation, maintenance or cleaning, and any changes or
modifications may lead to malfunction, damage or injuries.
•The manufacturer disclaims any liability for damage to persons or property caused
by the failure to comply with these rules or due to the user’s tampering of any
components of your appliance and failure to use the original spare parts.
•Any modification of the device must be authorized and performed by authorized
professional technical personnel.
•It is forbidden to make any modifications in the wiring of the device.
•In case of not following the safety instructions above, the device’s safety may
become limited.
5.1.2 Preparation
•Immediately after receiving the appliance, make sure that it has not been damaged
in transit, and that the packaging is not damaged. In the case of damage or missing
components, immediately notify the shipper or vendor/manufacturer providing the
article and serial numbers (nameplate is on the back of the unit) and attaching
photo evidence.
•Make sure that you will have access to the installation site and will not have
problems to pass through doors, corridors, or other passages.

- 54 -
•NOTE: During its shipment the unit may get overturned which may cause damage to
property or people as well as pose some difficulties. Please use a means of
transport appropriate to the weight of the device. Never pull or tilt the device; it
should be raised vertically from the ground and moved horizontally.
5.1.3 Place of installation
•The device should be placed indoors (never outdoors!) In a well ventilated room.
•Prior to positioning the combi steamer, check its dimensions and exact location of
the power and water connections, and of the exhaust duct.
•It is recommended to place the combi steamer under a kitchen hood outlet or
provide the outflow of hot vapours and fuses from the cooking chamber outside of
the building
•The combi steamer must be placed on an even surface to prevent its slipping or
tipping.
•The place of installation of the combi steamer must support the weight of the unit at
full load. Its gross weight can be found on the nameplate at the back of the combi
steamer.
•If the combi steamer are placed above
proofers, stainless steel tables or other
combi steamers it is not advisable to use the
upper surface to insert the GN containers so
that the user could look into the containers.
•For safety reasons, once you have
positioned the device, attach this
sticker "Risk of burning"
(provided in the package) on the combi
steamer at a height of 1600 mm from
the floor (see Figure on the right).
•Make sure that the combi steamer position allows for complete opening of its door
(180°).
•Position the combi steamer so that its back is easily accessible to enable the
connection of water and power supplies and its maintenance.
•The device is not suitable for external housing; it is necessary to keep a minimum
distance of 5 cm from all sides.

- 55 -
•The device shall never be placed near heat sources, fryers or other sources of hot
liquids; in case it is not possible to meet this requirement, the safe distance is 50 cm
from the sides and top of the device and 70 cm at its rear.
•Never place the device near combustible materials or containers made of flammable
materials (such as walls, furniture, partitions, gas cylinders) since it could lead to a
fire hazard. In case it is not possible to meet this requirement, cover the flammable
components with non-flammable thermo-insulating material, and follow the fire
regulations strictly.
5.1.4 Preparing to Install
•Remove the outer packaging (wooden box and/or cardboard) and dispose of them in
accordance with the regulations in force in the country of installation.
Remove the protective film
•Remove the protective film completely from the
external and internal walls.
•Remove any accessories, informational materials and
plastic bags from the combi steamer.
Adjusting the feet
CAUTION!
Do not use the combi steamer without the feet.
•When the combi steamer is used without the
feet, the air flow needed to cool digital
components and external walls is not provided,
and this can cause overheating and damage to
the combi steamer.
•The adjustable feet are attached with the
packed unit and must be screwed to the
combi steamer.
•The correct flat position of the combi steamer ensures its trouble-free operation.
Such position is achieved by adjusting the feet and checking it with a spirit level.
To adjust the feet, simply tighten or loosen them.

- 56 -
Attaching the drip tray
•The drip tray is used to collect liquids which
may flow out through the front door of the
combi steamer. Place the tray in front of the
combi steamer and fasten it with screws found
in a bag provided in the package. The screws
are screwed into the threaded inserts in the
lower front part of the combi steamer (Figure
on the right).
Attaching the drip tray drain
•Fit a plastic closure and a white water drain
hose which is found in the package. Make
sure that the hose is installed and fixed in
such a way as to allow the water to properly
drain from the drip tray to the sewage
network (Figure on the right).
5.1.5 Power supply connection
DANGER! Electric shock hazard!
In the case of improper installation the device may cause injuries!
Before the installation compare the local power grid parameters with the
parameters of the combi steamer power supply (see the nameplate). The
device can be powered only when these data are consistent!
•Before connecting to the power grid, make sure that the voltage and frequency
indicated on the nameplate correspond with those of the local power grid.
The allowable deviation in voltage is ± 10%.
•When the device does not have wheels to facilitate its movement we recommend to
connect the device to the power supply first, and then position it in its workplace.
•Make sure the power cord does not get damaged when moving the combi steamer.
This way the combi steamer will be connected to the power supply without difficulty
and in a more safety manner. The power cord shall be placed so that it does not
reach the ambient temperature higher than 50 °C at no point.

- 57 -
Combi steamer with power cord and power plug (116050)
•The combi steamer 116050 is equipped with a 3x 2.5 mm² H05RR F power cord and
a power plug. To establish the power supply connection, simply insert the plug into the
appropriate socket (the socket must match the provided plug and withstand the load
required for the device and specified on the nameplate).
•The device is supplied with an approved and certified power cord and power plug:
do not tamper with them or change anything in them.
•The device must be positioned so that the plug is easily accessible at all times.
Combi steamer (116060, 116080) with 380 – 415V 3NAC power cable (without plug)
•This steam convection oven must be connected to a power source compliant with
international national and local regulations. Installation must be performed by a
qualified electrician. Follow the instructions located at the back of the device.
Connection to the equipotential bonding system
•This connection should be made between different devices with the use of a plug-in
terminal marked with this symbol. The connection terminals are found at the
back of the device.
•The terminals allow connecting a yellow/green connection cord with a cross section
between 2.5 and 10 mm²
•The unit must be connected to the equipotential bonding system whose efficiency
should be checked in accordance with the guidelines of the applicable provisions.