Bartscher TT2000 User guide

TT2000
300187

Bartscher GmbH
Franz-Kleine-Str. 28
D-33154 Salzkotten
Germany
Phone: [phone]
Fax: [phone]
Service hotline: [phone]
www.bartscher.com
Version: 2.0
Date of preparation: 2022-09-02
Original instruction manual
EN

300187 3 / 8
EN
Technical Data
Name:
Tray trolley TT2000
Art. No.:
300187
Material:
stainless steel
Number of guide rail pairs:
20
Distance between guide rail pairs, in mm:
120
Load-bearing capacity per guide rail pair,
max. in kg:
10
Dimensions of utility surface (W x D),
in mm:
450 x 560
Railing height, in mm:
154
Load-bearing capacity of utility surface,
max. in kg:
10
Total load-bearing capacity, max. in kg:
80
Number of swivel casters:
4
Locking swivel casters:
2
Diameter of casters in mm:
100
Number of caster dampers:
4
Material of caster dampers:
plastic
Dimensions (W x D x H), in mm:
1.155 x 680 x 1.840
Weight, in kg:
39,6
We reserve the right to implement technical modifications.
Version / Characteristics
•Delivery form: self-assembly set, simple assembly
•Area of application: transport, clearing
•Version: guide rails
•Designed for:
–standard canteen norm trays (443 x 343 mm)
–GN container, 1/1 GN, minimum depth of 40 mm (not suitable for GN
trays)
•May be loaded from both sides
<Endergebnis>

4 / 8 300187
EN
Intended Use
As described below, every use of the appliance for a purpose differing and/or
diverging from its intended standard use, is prohibited and considered to be an
unintended use.
The following is an intended use:
–clearing trays,
–transport of GN containers.
Scope of Delivery / Part Name
•Unpack the tray trolley and remove the packing material pursuant to
environmental regulations.
•Check completeness of delivery according to the list below:
Component
Number
Name
2
Lateral section with 10 preinstalled tray
guide rails and a lateral wall
1
Middle section with 10 preinstalled tray
guide rails at both sides
1
Railing shelf

300187 5 / 8
EN
2
Front railing
2
Lateral railing
4
Crossbar
1
Allen wrench
12
M8*55 bolt
12
Square washer
4
Damper for swivel caster
2
Locking swivel caster
2
Non-locking swivel caster
12
M5*10 bolt (fixed in lateral wall)
4
M5 nut

6 / 8 300187
EN
Assembly
1. First, assembly the railings for top shelf.
Use M5 nuts to connect railings with each
other.
Fig. 1
2. Insert the assembled railings on the shelf.
Bolt the railings with the shelf using M5
nuts.
Fig. 2
3. Assemble 2 crossbars (at the bottom) to
the lateral section of the tray trolley.
4. Place one each square washer between
the bottom crossbar and the lateral
section, and between the lateral section
and each M8*55 bolt; tighten with Allen
wrench.
5. Connect 2 crossbars (at the bottom) with
the middle section and the second lateral
section, using washers and nuts, as
described above.
Fig. 3

300187 7 / 8
EN
6. Place the tray trolley on its side.
7. Mount 4 swivel caster dampers onto
square tubing of lateral sections.
8. Finally, screw swivel casters into square
tubing of lateral sections.
9. Set the tray trolley on swivel casters.
10.Insert folded shelves with railing (point 2)
on the tray trolley frame.
11.Screw the shelf with railing to the tray
trolley frame.
Fig. 4
Setting
1. Check the stability of the tray trolley.
2. Level the tray trolley through screwing in
and out swivel casters.
3. After setting the tray trolley in a designated
place, lock 2 swivel casters with lockings
to prevent accidental relocation or overturn
of the tray trolley.
Fig. 5

8 / 8 300187
EN
Tray Trolley Loading
The tray trolley can be loaded from both
sides.
1. Insert the required number of suitable
trays in guides.
2. Place cups, glasses, etc. on the top
shelf.
The shelf railings prevent dishware from
falling down.
Pr
e
v
e
nt
s
fa
lli
n
g
d
o
w
n
Fig. 6
Cleaning
ATTENTION!
Scrubbing agents, washing agents with solvents or caustic substances
may damage the surface.
For cleaning, use only agents suitable for stainless steel.
1. Clean the tray trolley regularly with warm water and a soft, damp cloth. Use a
mild cleaning agent if required.
2. Wipe dry the tray trolley with a soft cloth.