BassBoss DJ112 User manual

DJ112 Powered MicroMain
wner’s Manual
www.bassboss.com
©®2016 True Lee Loudspeakers, LLC – [email protected] – 512-368-3268 855-8-BASS-70 Toll Free

TABLE F C NTENTS
verview..................................................................................... 3
Technical Specifications............................................................ 4
Photos......................................................................................... 5
Safety Information..................................................................... 6
Setup Instructions..................................................................... 7
Trouble Shooting....................................................................... 7
Warranty..................................................................................... 8
FCC Compliance Notice ............................................................. 9
Need more assistance? Support is available via phone or email.
Email: [e-mail]
Phone: [phone] toll free or 512-368-3268
Web Site: www.bassboss.com
DJ112 Powered MicroMain
wner’s Manual

Page 3
The DiaMon DJ112 is a very compact, high-output, self-
powered loudspeaker. It features a 12” woofer and a co-axial
1.4” exit compression driver that plays through the center of
the woofer, making it a true point-source cabinet. Both the
woofer and tweeter coils share the same magnetic structure
to keep size and weight to a minimum.
Because the tweeter exits through the middle of the woofer, the
extra area that the tweeter would ordinarily take up on the
front of the loudspeaker is eliminated, which helps make the
DiaMon extremely compact. t’s barely bigger than a 12” woofer
but also incorporates a 1.4” exit compression driver with a 3”
voice coil. The DiaMon DJ112 includes a 1500-watt class D
Powersoft amplifier with built-in digital signal processing, is bi-
amped and has a full complement of protections, limiters and
equalizers that ensure consistent, accurate and reliable
operation. t is fully self-contained and needs no more than
power and signal to be ready to go.
Even though the box is very small and very lightweight, there is
nothing small or lightweight about its performance. This box is
literally packed with the best components and technology
money can buy, the whole point of which is to do more with
less.The output of this little speaker is totally out of proportion
to its size. t’s extremely loud, but it’s capable of being loud, not
struggling to be loud. t sounds much bigger than it looks and
has the ability to maintain crystal clarity even at the upper
limits of its very remarkable capabilities.
The DiaMon DJ112 is a mid-high loudspeaker, so in order to
deliver the BASSBOSS experience with full system sound it’s
best to combine it with a very powerful BASSBOSS subwoofer. t
has the output to keep up with several subs and for system
usage is intended to be mounted on a pole-stand above one or
more of the BASSBOSS Profundo Series subwoofers. Used with a
subwoofer system, the DiaMon is an extraordinarily size-
conscious and yet very powerful main speaker.
The DiaMon DJ112 has a unique angle-cut corner that allows it
to be placed on a table and used as a DJ monitor without pole-
mounting, freeing up valuable DJ desk real estate. t also has a
securely attaching threaded pole-mounting system for when it
is used attached to a socket-equipped BASSBOSS subwoofer or
on a similarly equipped tripod stand.An adjustable wall-mount
bracket is also available for permanent installations.
As a main speaker, the DJ112 can be used with two double 18”
subwoofers and easily deliver all the mid-high you need to keep
up with them.As a DJ monitor it provides tight, punchy
performance and doesn’t distort at high levels.As a live
reinforcement speaker, this versatile box provides consistent
sound quality over a wide dispersion pattern with excellent
resistance to feedback.
DJ112 Powered MicroMain
• Co-Axia Point Source for Better Off-Axis Response
• Superior Rejection of Feedback
• U tra Sma Size and Light Weight
• Bi-Amped Se f-Powered with Bui t-In DSP
• 1500W Digita C ass D Amp ifier
• Stunning Output-to-Size Ratio
• Four Dep oyment Ang es P us Po e-Mount
With optional chaos symbol
custom-cut aluminum grill.

Page 4
Performance
Loudspeaker Description: Single 12” co-axial, compact bi-amplified, self-powered MicroMain and monitor
Frequency Response (±3 dB): 80-18,000 Hz
Maximum Sustained Output: 123 dB
Short-Term Peak Output: 126 dB
Nominal Dispersion (°H x °V): 80 x 80 conical
Enclosure Type: Bi-amplified, co-axial, multi-angle, vented wedge
Transducer: LF: 1 x 12 " dia (300 mm) neodymium motor woofer with 3" (76mm) copper winding voice coil
HF: 3" diaphragm compression driver on 1.4" throat concentrically mounted wave guide
Cabinet Construction: 16 mm Baltic Birch plywood. Equipped with 1 handle and a threaded pole socket mount
Dimensions (HxWxD): 14 in. x 14 in. x 11.5 in.
Net Weight: 30.6 lbs (13.9 kg)
Shipping Weight: 36 lbs (16.3 kg)
Exterior Finish: Weatherproof bonded high-pressure polyurethane
Grill: CNC Waterjet cut 1/8” aluminum over black perforated, powder-coated steel
Physical
Cover: Heavy-duty padded nylon transport cover
Mounting Brackets: Pole, Tripod, Wall, Ceiling and Desk Mount options
Support Pole: 26" length and 47" lengths available
Compatible Subwoofers: BASSBOSS Profundo Subwoofers
Online nformation: www.bassboss.com/dj112
Amplification: 2 x 750W (E AJ test 1kHz @1%THD)
Processing: ntegrated comprehensive DSP for HP, LP, EQ and limiting
Electrical Connectors: Neutrik Powercon n
Voltage Operating Range: 95-250V Auto-switching power supply
Current Draw, Nominal: 3.6A @ 1/8 power
Current Draw, Peak: 20A
Signal nput Connector: XLR-F
Signal Output Connector: XLR-M pass-through only
Power
Optional

Page 5
Available with original custom-cut aluminum grill, customer logo
grill, chaos symbol aluminum grill, or black perforated steel grill.
Custom-cut logo grill for Freshmoon Records.

Page 6
SAFETY INF RMATI N
mportant information regarding safety and the use of your loudspeakers:
Never stand in the immediate vicinity of loudspeakers driven at a high level.Professional loudspeaker systems are capable of causing a sound
pressure level detrimental to human health. Seemingly non-critical sound levels (from approx. 95 dB SPL) can cause hearing damage if
people are exposed to it over a long period. To prevent potentially dangerous exposure to high levels of acoustic pressure, anyone who is
exposed to these levels should use adequate protection devices.
When a transducer capable of producing high sound levels is being used,it is therefore necessary to wear ear plugs or protective earphones.
See the manual technical specifications to know the maximum sound pressure level.
n order to prevent accidents when setting up the loudspeakers or loudspeaker stands, make sure they are standing on a firm surface.
Ensure that all additional hardware, fixings and fasteners used for installation or mobile deployment are of an appropriate size and load
safety factor.
Pay attention to the manufacturers' instructions and to the relevant safety guidelines.
Regularly check the loudspeaker housings and accessories for visible signs of wear and tear, and replace them when necessary.
Regularly check all load bearing bolts in the mounting devices.
Caution: Loudspeakers produce a static magnetic field even if they are not connected or are not in use. Therefore make sure when erecting
and transporting loudspeakers that they are nowhere near equipment and objects which may be impaired or damaged by an external
magnetic field. A distance of 3 feet (1m) should be maintained between loudspeakers and sensitive equipment such as CRT monitors or
magnetic storage media.
Never attempt to carry out any operations, modifications or repairs that are not expressly described in this manual.
Contact your dealer or BASSBOSS support if the product is not functioning properly.
BASSBOSS strongly recommends this product be installed by a qualified, professional installer who can ensure correct installation and certify
that is is installed in compliance with the regulations in force.
The entire audio system must comply with the current local standards and regulations regarding electrical systems.
IMP RTANT N TES
To prevent the occurrence of noise on signal cables,use shielded cables only. Avoid routing signal cables close to equipment that produces
high-intensity electromagnetic fields such as transformers,power cables and loudspeaker wires.Do not coil excess power cable.Do not coil
or wrap power cables and signal cables together.

Page 7
SET UP INSTRUCTI NS
1. Place loudspeaker in the desired location. Ensure that it is secure and stable.
2. Rotate the input attenuator knob counterclockwise to the lowest setting.
3. Connect signal via the XLR input jack.
4. Connect the amplifier module’s power supply cord using the blue PowerCon™ connectors.To insert, align the indexing tabs on the
Powercon™ connector, insert it into the socket and rotate clockwise until the latch catches.
5. Connect the electrical plug to a power source.
6. Select the desired preset via the PGM SEL button.
7. Rotate the input attenuator clockwise to achieve the desired sound level.
The DJ112 compact monitor loudspeaker’s DSP is supplied with 4 presets. All four presets contain limiter settings to ensure safe operation of
the unit.The presets are accessed in sequence via the preset select button on the rear of the unit.A green LED indicates the active preset. The
level knob provides a range of control from OFF to +12dB within each preset.
The presets are described as follows:
Preset 1: Warm/Near-field setting featuring HF output attenuated to -4dB
Preset 2: Warm/intermediate distance setting featuring HF output attenuated to -2dB
Preset 3: Flat response setting
Preset 4: Far-field setting featuring HF output elevated to +2dB
System Setup Addendum:
When connecting multiple loudspeakers in a system, signal can be passed through from one loudspeaker to another using XLR cables. No
processing is applied to the signal as it passes through from the input to the output connectors in each loudspeaker. Signal can be routed in
any sequence because each loudspeaker receives a full-range signal and applies the necessary processing in order to operate as part of the
overall system. t is recommended to run signal to the nearest box first and patch to the next nearest box in sequence. t is recommended to
run the DJ112 as the last box in the sequence when it is mounted on a pole or tripod stand.
TROUBLESHOOTING
f after following the above instructions for setup you have no output from the loudspeakers, please check the following:
Verify that the green power (PWR) LED is on. f not, check the following:
1. s the power cord plugged into a live outlet?
2. s the Neutrik Powercon connector rotated into the locked position?
f the power LED is on, check the following:
s the green “signal present” LED (S G) illuminating? f not:
1. s the signal cable connected to the input?
2. s the signal cable connected to an operating output at the other end?
3. s the signal flowing to the input? Check the integrity of the cable.

Page 8
Thanks for your BASSB SS purchase!
WARRANTY INF RMATI N
Beyond ensuring your satisfaction,our extensive "Sound Defense" transferable warranty which covers all BASSBOSS products.
STANDARD CABINET WARRANTY
BASSBOSS loudspeaker cabinet integrity,including all joinery,fasteners,handles and wood,is warranted against defects in materials and workmanship for a period
of six years from the date of purchase.This warranty does not cover items that are intended to wear and can be replaced if worn or damaged.Examples of items
not covered by this warranty are cabinet feet,grills and the finish or coating applied to the cabinet.
ENHANCED C MP NENT WARRANTY
BASSBOSS self-powered loudspeaker amps and electronic components are covered against failures due to defects in materials and/or workmanship for a period
of three years from the date of purchase. Speaker drivers and burned or open voice coils in subwoofers are covered for two years.
UR SUPP RT
t is our goal to provide trouble-free loudspeakers.That objective begins as part of the design phase and continues on through to any service you may require.
n order to be able to provide the lowest possible failure rate, the best possible warranty service and the fastest turn-around time,we request that you contact
us immediately if you notice any problem with your system, and before you attempt any repairs. We can provide the best and fastest solution if we know the
details of the problem before any repair attempts are made. Often BASSBOSS technicians can troubleshoot problems that may arise and no repair or further
service will be necessary.
Warranty support is a service,and part of that service includes helping you prevent failures and minimize repair and shipping costs.Please do not ship products
without first obtaining a return authorization number by calling 512-368-3268 (855-822-7770 toll-free) or by emailing suppor[email protected]. BASSBOSS
service technicians will provide assistance and instructions on shipping and packaging requirements specific to your service needs.
WARRANTY LIMITATI NS
During the warranty period, if your loudspeaker malfunctions or fails due to any defect in components or manufacturing, the failed parts will be repaired or
replaced.This warranty does not extend to damage resulting from improper installation, misuse, neglect or abuse. Warranty coverage will be determined upon
inspection by BASSBOSS personnel. This warranty does not cover labor other than that authorized and performed by BASSBOSS personnel. Service will be
performed upon the return of the failed unit, together with its original sales receipt or other proof of purchase, to BASSBOSS or an Authorized Service Facility.
Purchaser is responsible for all costs of shipping and handling. Cosmetic damage is specifically excluded from this warranty. This warranty is rendered void if
service, repairs and/or modifications are attempted or made by anyone not specifically authorized byBASSBOSS to perform said services.Please contact BASSBOSS
or your local BASSBOSS dealer before attempting any repairs and before shipping parts in for service.
This warranty gives you specific legal rights, and you may also have other rights, which vary from state to state. For more information concerning BASSBOSS
service and warranty policies please contact us at 512-36-3268 or [phone] toll-free.
EXP RT WARRANTY
BASSBOSS products can be purchased worldwide. n countries without local BASSBOSS distributors, product requiring service must be shipped back to the US
for warranty repairs. n most cases, the entire cabinet will not need to be shipped. Generally only the individual affected parts will need to be shipped to the
factory for servicing. Please contact BASSBOSS before attempting any repairs and before shipping parts in for service.
SHIPPING AND PACKAGING
Please package your returns safely and securely. BASSBOSS does not cover damage that occurs in transit. Freight insurance is recommended.

Page 9
www.bassboss.com
©®2016 True Lee Loudspeakers, LLC – [email protected] – 512-368-3268 855-8-BASS-70 Toll Free
FCC C MPLIANCE N TICE
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
CAUT ON: Changes or modifications not expressly approved by the party responsible for compliance could void the
user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part
15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment gener- ates, uses, and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. f this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on,the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• ncrease the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
EC DECLARATI N F C NF RMITY
Manufacturer:
BASSBOSS 9501 Cargo Ave Ste 600 Austin TX 78719
We declare that under our sole responsibility the product: DJ112 Powered MicroMain
ntended use: Professional Audio Loudspeaker
Are in conformity with the provisions of the following EC Directives,including all amendments,and with national legislation
implementing these directives:
• 2006/95/EC Low Voltage Directive
• 2004/108/EC Electromagnetic Compatibility Directive
• 2002/95/CE RoHs Directive