Baumatic BHI655 User manual

BHI655/BHI755
60/70 cm
Induction Cooktop

User Manual for your Baumatic
BHI655/BHI755
60/70 cm Induction cooktop with slider
1
NOTE: This User Instruction Manual contains important
information, including safety & installation points, which will
enable you to get the most out of your appliance. Please keep it
in a safe place so that it is easily available for future reference; for
you or any person not familiar with the operation of the appliance.
JW 10/05/13

2

3
Contents
Environmental note 4
Important safety information 5 – 8
Specifications 9 – 11
Product and aperture dimensions 9
Product specifications 9
Electricaldetails 10
Ceramic cooktop surface layout 10
Control panel layout 11
Using the ceramic cooktop 11 - 22
Beforefirstuse 11
Touchcontrols 12
Switching the cooktop on 12
Switching on a zone and setting a power level 13
Powerlevels 14
Switchingoffazone 14
Switching the cooktop off 15
Residual heat indicator 15
Pansensor 15
Cookware that is suitable for an induction cooktop 16
Theboostfunction 16
The cooktop timer (minute minder) 17
The cooktop timer (linked to a cooking zone) 18 – 19
Cancelling a timer function 20
Locking the cooktop 20
Safetycut-off 21
High temperature protection 21
Detectionofunknownitems 21
Thestop/startfunction 21
Cooktop guidelines 22
Cleaning and maintenance 23 - 24
Cleaning the ceramic cooktop 23
Aftereachuse 23
Cleaningtable 23
Using a ceramic cooktop scraper 24
Using a specialist ceramic cooktop cleaner 24
Installation 24 - 30
Positioning 25
Unpacking the appliance 26
Installing the appliance 26– 27
Electrical connection 27 - 28
Connecting the mains supply cable 28
Replacing the mains supply cable 29
My appliance isn’t working correctly 29 - 31
Errorcodes 30
Contactdetails 35

Environmental note
oThe packaging materials that Baumatic uses are environmentally
friendly and can be recycled.
all packaging material with due regard for the
environment.
oPlease discard
4

5
Important safety information
Your safety is of the utmost importance to Baumatic.
Please make sure that you read this instruction booklet
before attempting to install or use the appliance. If you
are unsure of any of the information contained in this
booklet, please contact the retailer where you
d your unit.
usehold use and for the
e ambient temperature of the room it is located in,
r discolouration at temperatures below the
ntion of this temperature limit, will be the liability of the
uarantee. The foregoing does not affect your
ent of Baumatic Ltd. will
ld not use this appliance to store items on or as a work
be kept away from the
rised service
s or their authorised service agents.
purchase
General Information
This appliance is designed for domestic hoocooking and frying of domestic foodstuffs.
oIMPORTANT: The adjacent furniture and all materials used in the
installation must be able to withstand a minimum temperature of
85°C above th
whilst in use.
oCertain types of vinyl or laminate kitchen furniture are particularly
prone to heat damage o
guidelines given above.
oAny damage caused by the appliance being installed in
contrave
owner.
oYour new appliance is guaranteed against electrical or mechanical
defects, subject to certain exclusions that are noted in Baumatic’s
Conditions Of G
statutory rights.
oThe use of this appliance for any other purpose or in any other
environment without the express agreem
invalidate any warranty or liability claim.
You shouosurface.
oNo modifications to the appliance are permitted by Baumatic Ltd.
oYou should not store or place flammable or highly flammable
liquids/materials on top of or near the appliance. Items made from
aluminium, plastic or plastic film should also
appliance, as they may fuse to the surface.
Repairs may only be carried out by authootechnician

6
hild Safety
pliance at any time. During and after use, all surfaces
will be hot.
ensure that they are kept under close supervision at all
times.
n should only be allowed to utilise the appliance when
supervised.
eneral Safety
uld only be installed and connected by a suitably
qualified person.
that you build the appliance into, meet with the relevant standards.
ains supply. Otherwise there is the risk of electric shock
occurring.
r use.
Use caution when using the appliance to avoid being burned.
uring use
cooktop surface when it
is delivered should be removed before use.
sing the appliance, otherwise there
is a risk of burns being caused.
th the cooktop surface when it is hot or any hot
cookware.
oking with fat and oil the appliance should not be
left unattended.
Make sure that all of the cooking zones are switched off after use.
C
oBaumatic strongly recommend that babies and young children are
prevented from being near to the appliance and not allowed to
touch the ap
oIf it is necessary for younger family members to be in the kitchen,
please
oOlder childre
G
oThe appliance sho
oCare should be taken to ensure that the units and work surfaces
oIf you notice any scratches, splits or cracks in the ceramic glass,
you should immediately switch off the appliance and disconnect it
from your m
oThis appliance will become hot during use and retain heat afte
D
oAny film or stickers that are present on the
oCare should be taken when utili
oYou should not allow the electrical connection cables to come into
contact wi
oIf fat and oil overheats, then it can ignite extremely quickly. For this
reason, when co
o

7
pliances providing these comply with the same
legislation.
tic can only guarantee the
conformity of our own product.
placed on a cooking zone that is switched on, it can
get hot.
op, they could interfere with the operation of the
cooktop.
leaning
Cleaning of the cooktop should be carried out on a regular basis.
nce, it should
be disconnected from the mains and allowed to cool.
t using this appliance and when
following the cleaning procedure.
any other high pressure cleaning
equipment to clean the appliance.
section of this booklet that refers to
stallation.
sult of improper use or incorrect
stallation of this appliance.
oIMPORTANT: This ceramic induction cooktop fully complies
with current legislation regarding electro-magnetic
interference and is designed not to interfere with other
electronic ap
oAs the cooktop generates magnetic fields in its immediate
vicinity, pacemakers and active heart implants must be
designed to comply with relevant regulations. If in doubt,
you should consult the manufacturer of your device or your
doctor. In this respect, Bauma
oIf an object made of metal, (e.g. saucepan lid, knife, fork or
spoon) is
If these objects are placed in the cupboard underneath
the cookt
C
o
oIMPORTANT: Before attempting to clean the applia
oGreat care should be taken whils
oYou should not use a steam jet or
Installation
This appliance must be correctly installed by a
suitably qualified person, strictly in accordance
with the manufacturer’s instructions. Please see
the specific
in
Baumatic Ltd. declines any responsibility for injury or damage,
to person or property, as a re
in

8
Declaration of conformity
ce
must be used by a trained person for domestic purposes only.
o avoid damaging your appliance
The ceramic glass can be damaged by objects falling onto it.
ic glass edge can be damaged by knocks from
cookware.
top surface and not
dragged.
cookware
placed on it. Also the cookware should not be empty.
not prevent the cooktop surface from becoming
damaged.
oThe manufacturer declares that the cooktop is built using
certified materials and requires the appliance to be installed in
accordance with the standards currently in force. This applian
T
o
oThe ceram
oPans should be lifted on and off
the cook
oCooking zones should not be switched on without
oFood or liquid that has high sugar content may damage the
cooktop, if it comes into contact with the ceramic cooktop
surface. Any spillages should be wiped up immediately, however
this may

9
pecificationsS
Produc Aperture dimensions:
t dimensions:
mm Height: 110 mm (incl. ventilation)
th booster (2.00 kW) Ø 140 mm
erators
y detection
on
oCeramic cooktop scraper
Depth: 520 mm Depth: 495 mm
Width: 590/700 Width: 565 mm
Height: 55 mm
Product specifications:
o1 x 2.20 kW induction zones with booster (3.60 kW) Ø 220 mm
1 x 2.20 kW induction zones with booster (3.00 kW) Ø 180 mmo
o1 x 1.40 kW induction zones with booster (2.00 kW) Ø 150 mm
o1 x 1.40 kW induction zones wi
oFront touch control operation
o4 individual residual heat indicators
o4 independent induction gen
Electronic timero
oPan compatibilit
oPause function
oRecall functi
oSafety lock
Standard accessories

10
lectrical details
Supply Connection: used
h 3mm contact gap)
ains Supply Lead: 3 core x 6 mm² (not supplied)
good idea to
cord this information before you install your appliance.
odel Number ……………………………….
erial Number ……………………………….
ate of Purchase ……………………………….
eramic cooktop surface layout
ction zones with booster (2.00 kW) Ø 140 mm
e
6) Control panel
E
Rated Voltage: 220 - 240 Vac 50 - 60 Hz
32A (double pole switched f
outlet wit
Max Rated Inputs: 7.20 kW
M
For future reference please record the following information which can
be found on the rating plate and the date of purchase which can be
found on your sales invoice. The rating plate of your cooktop is located
on the underneath of the appliance. Therefore it is a
re
M
S
D
C
1) 1 x 2.20 kW induction zones with booster (3.60 kW) Ø 220 mm
2) 1 x 1.40 kW induction zones with booster (2.00 kW) Ø 150 mm
3) 1 x 2.20 kW induction zones with booster (3.00 kW) Ø 180 mm
4) 1 x 1.40 kW indu
5) Cooktop surfac

11
ontrol panel layout
sing the ceramic cooktop
C
1) Cooking zone power level controls
ntrol
k button
utton
6) Timer controls
2) Cooking zone selection controls
3) Start (resume) / Stop (pause) co
4) Control panel safety loc
5) Power ON/OFF b
U
Before first use
cooktop surface
see “Cleaning and maintenance” section).
umidity that has formed on
the heating elements during transit.
oDo not burn off more than one zone at once.
you burn it off. Otherwise the induction zone will
not operate.
IMPORTANT: You should clean the ceramic
(
oYou should switch on one cooking zone at a time for 5 minutes
at the maximum setting. This will help to eliminate any new
smell that exists and evaporate any h
oYou must place a saucepan filled half full with cold water on
each zone as

T
12
ouch controls
ans of the touch controls that
can be found on the control panel.
ls respond to touch so you do not need to add any
pressure.
d use the ball of your finger not the tip when using the
controls.
oA beep will sound each time a touch is registered.
n a thin film
of water may make the controls difficult to operate.
witching the cooktop on
tors will show “-”.
The cooktop has now entered stand-by mode.
oPress the ON/OFF button.
oAll operations are performed by me
oThe contro
oYou shoul
oYou should ensure that the controls are kept clean, dry and that
no objects such as utensils or cloths cover them. Eve
S
oWhen the cooktop is connected to a power supply, an audible
signal will sound. All of the cooking zone indica

13
witching on a zone and setting a power level
: A zone must be selected within 1 minute of turning the
cooktop on.
on the
cooking zone that you wish to use.
An indicator
next to the relevant button will flash.
, the cooktop will
switch off automatically.
isplay. You can alter
the power level at any time during cooking.
rnatively with the heat setting, this
eans that:
n is too small or not properly centred on the cooking
zone.
ically turn off after 1
minute if no suitable pan is placed on it.
S
IMPORTANT
oMake sure that the bottom of the pan and
the surface of the cooktop are clean and
dry before placing a suitable pan
oPress the cooking zone selection button of the
cooking zone that you want to use.
oSelect the power level for the cooking zone
that you have selected using the power level
control, which ranges from 1 - 9. If you do
not choose a heat setting within 1 minute of
turning the cooktop on
oThe power level will show in the relevant d
Pan sensor error
If the display flashes with the symbol shown
opposite, alte
m
You have not placed a pan on the correct cooking zone or,
The pan you are using is not suitable for induction cooking or,
The pa
oNo heating will take place unless there is a suitable pan on the
cooking zone. The display will automat

14
ower levels
ds at the different
power levels please refer to the table below.
luence the power level
required.
Level Recommended Use
P
oFor a general guide to cooking various foo
oPlease note that this table should be viewed as a guide only and
that other factors such as cookware, weight and amount of food
and personal preference will all inf
Power
1 - 2 chocolate, butter and foods that burn
g.
g.
oDelicate warming of small amounts of food.
oMelting
quickly.
oGentle simmerin
oSlow warmin
3 - 4 ng. oReheating.
oRapid simmeri
oCooking rice.
5 - 6 oCooking pancakes.
7 - 8 ta. oSautéing.
oCooking pas
9 .
o the boil.
oBoiling water.
oStir-frying
oSearing.
oBringing soup t
Switching off a ne
f the
cooking zone that you want to switch off.
ntrol. Ensure display shows
power level “0”.
seconds, the cooking zone will
switch off.
at indicator” for further
mation).
zo
oPress the cooking zone selection button o
oTurn the cooking zone off by touching “0” on
the power level co
oAfter a few
oAn “H” symbol will show in the cooking zone
indicator until the surface has cooled down to
a safe temperature (see the section on the
“residual he
infor

S
15
witching the cooktop off
itched off all of the cooking zones, you should switch
the cooktop off.
oPress the ON/OFF button.
top off at any time by
pressing the ON/OFF button.
esidual heat indicator
is
therefore still high enough to cause injury.
e should be taken in case the surface
temperature is still high.
an sensor
ach zone has a sensor on it, so it can detect the presence of a pan.
ould be one size smaller than the nominal diameter of the
zone.
priate for use on an
induction zone cooktop.
etected after 1
minutes the cooktop will automatically switch off
ooktop (see the pan manufacturer’s trademark
or instructions).
Once you have sw
oIt is possible to turn the cook
R
oAfter a zone is switched off, the
corresponding cooking zone indicator will
show a letter “H”. This means that the
temperature of the zone is over 60°C and
oIMPORTANT: The residual heat indicator will disappear if your
mains supply is cut. Car
P
E
oThe sensor is fine-tuned to detect a pan being placed on it. The
pan sh
oIf after placing a pan on a cooking zone and
selecting that cooking zone, a “U” shaped
symbol appears on the cooking zone indicator,
this means that the pan is either the incorrect
size or shape. Or it could be made from a
material that is inappro
oIf a cooking zone is selected but no pan is detected, the pan
sensor system will check for the presence of a pan
approximately every few seconds. If no pan is d
oYou should check that your pans are suitable for use on an
induction zone c

16
Cookware that is suitable for an induction cooktop
ware that is normally suitable for use on
n induction
Su e
The table below shows cook
a zone cooktop:-
Cookware itabl
Steel, enamelled steel Yes
Cast iron Yes
Stainless steel Yes ( pan
manufacturer)
if stated by the
Aluminium, copper, brass No
Glass, ceramic, porcelain No
oThe bottom of the pans should be as flat and thick as possible.
e cooktop. This does not
mean that there is an appliance fault.
re placed in
the centre of the induction zone that you are using.
he boost function
ating speed, the booster
function can be used for any cooking zone.
lection button of
the zone you wish to use.
ill show “b” to indicate that the function has been
etting. The booster function can
be used on every cooking zone.
9 on the control
ntrol panel.
oCertain types of cookware may result in a noise being made
when being used on an induction zon
oIMPORTANT: You should make sure that all pans a
T
To obtain a faster and more powerful he
oPress the cooking zone se
oThen press the booster button. The relevant cooking zone
indicator w
activated.
oThe boost function will operate the chosen cooking zone at
maximum power for 5 minutes. After this time, the cooking zone
will return to its original power s
oThe booster function can be de-activated by selecting the
relevant zone and then pressing either the booster button (“B”)
again, by selecting a new temperature from 1 –
panel, or by selecting “0” on the co

T
17
he cooktop timer (minute minder)
es. At the end of the countdown period an
audible signal will sound.
minder even if you are not
using a cooking zone.
“ button to
increase or decrease by 10 minutes.
and
“00” will show in the minute display.
countdown
begins automatically.
nds and the
timer indicator will show “- -”.
he cooktop timer (minute minder) is an audible
larm only.
Your cooktop has a timer which will countdown a period of time
between 1 and 99 minut
oPress the ON/OFF button to turn the cooktop on.
You can use the minute
oPress either timer button to enter the minute
minder setting mode. Touch the “+” or “-“
button to increase or decrease the time by 1
minute. Press and hold the “+” or “-
oPressing the “+” and “-“ buttons
together will cancel the alarm time
oWhen the required countdown time is shown
in the display, release all controls. The
display will flash for 5 seconds and show the
remaining time and the
oWhen the set countdown time has elapsed
an alarm will sound for 30 seco
WARNING: Any cooking zones are in use will continue heating.
You will need to switch them off manually when cooking is
complete. T
a

T
18
he cooktop timer (linked to a cooking zone)
ime has elapsed the cooking zone will switch off
automatically.
oPress the ON/OFF button to turn the cooktop on.
ce a
suitable pan on the selected cooking zone.
ash and
“10” will show in the timer display.
ease or decrease by 10
and “00” will
show in the minute display.
minate indicating that the
zone is selected.
countdown
begins automatically.
You are able to link a countdown time to a cooking zone so that when
the countdown t
oPress the cooking zone selection button of the
cooking zone that you want to use and pla
oTouch the “+” or “-“ on either timer control.
The timer indicator will start to fl
oTouch the “+” or “-“ button to increase or
decrease the time by 1 minute. Press and hold the
“+” or “-“ button to incr
minutes.
oPressing the “+” and “-“ buttons together
will cancel the alarm time
oNOTE: The red dot next to power level
indicator will illu
oWhen the required countdown time is shown
in the display, release all controls. The
display will flash for 5 seconds and show the
remaining time and the

oWhen the set countdown time has elapsed an
alarm will sound for 30 seconds and the
cooking zone will switch off. The timer
indicator will show “- -”.
IMPORTANT: All other cooking zones which are in use will
continue to operate.
oA red dot will appear next to the power level
indicator of the relevant zone. When you set a
countdown time for several zones
simultaneously, a red dot will appear in all the
relevant zone indicators. The timer display will show the
minimum countdown time and the corresponding red dot will
flash.
(set to 15 minutes)
19
(set to 45 minutes)
oWhen the set countdown time has elapsed, the relevant cooking
zone will switch off automatically. If countdown timers for other
cooking zones are set, the timer display will then show the next
minimum countdown time and the corresponding red dot will
flash.
WARNING: If any other cooking zones are in use, without a
countdown timer set, they will continue heating. You will need
to switch them off manually when cooking is complete.