5
Electronic Clock Functions
Timer Alarm: An audible signal is produced at
the programmed time, even if the oven is not
being used.
Cooking Time: This function allows you to pro-
gramme cooking time length, after which the
oven will turn off automatically.
Cooking Stop Time: This function allows you
to programme the time for cooking to stop,
after which the oven will turn off automatically.
Cooking Time and Cooking Stop Time: This
function allows both cooking time length and
the stop time to be programmed. The oven
switches on automatically at the set time and
operates for the cooking time it has been pro-
grammed for. It switches itself off automati-
cally at the entered stop time.
Changing the Clock Alarm Tone
1Press + and - at the same time. You will noti-
ce a dot light up between the + and –
symbols on the clock display.
2Press MODE and you will see “ton1” light up
on the clock display.
3The alarm tone can be changed by repea-
tedly pressing on the - symbol.
Programming the Timer Alarm
1Press on MODE. The symbol will flash on
the clock display.
2Select the length of time after which you want
the alarm to sound by pressing on + or -.
3The alarm will be confirmed by two consecu-
tive beeps and the display will show the
current time. The symbol will remain lit.
4At the programmed time, the alarm will
sound and the symbol will begin to flash.
5Press on any symbol to turn off the alarm.
The symbol will continue to flash.
6Keep pressing MODE until the function is
switched off.
You can see how much time is left at any time
by pressing MODE until the symbol flashes.
You can then change the selected time by
pressing + or -. The beep you hear will confirm
the new time has been set.
Programming Cooking Time
1Press MODE until you hear a beep. Press
MODE again and the word “dur” will appear
on the clock display.
2Select the cooking time by pressing + or -.
3You will then hear a beep and the present time
and the word “AUTO” will light up to show that
the oven will switch off automatically.
4Select a cooking function and temperature.
5When the set cooking time is over, the oven
will turn off and an alarm will sound.
6Press any symbol to turn off the alarm. The
oven will remain off and AUTO will continue
to flash.
7Keep pressing on MODE until you hear a beep
to show the function is now off. Then set the
controls to to switch off the oven.
You can see how much time is left and change
the remaining cooking time. Follow the pre-
vious instructions.
To cancel this function, just press + and - at
the same time.
Programming the Cooking Stop Time
1Press MODE until you hear a beep. Then
press MODE until the word “End” appears
on the clock display.
2Select the cooking stop time by pressing + or -.
3You will then hear a beep and the present time
and the word “AUTO” will light up to show that
the oven will switch off automatically.
4Select a cooking function and temperature.
5When it is the time for cooking to stop, the
oven will switch off and an alarm will sound.
6Press any symbol to turn of the alarm. The
oven will remain off and AUTO will continue
to flash.
7Keep pressing on MODE until you hear a beep
to show the function is now off. Then set the
controls to to switch off the oven.
You can use this function even if you are coo-
king with the oven. If this is the case, follow all
of the above instructions except No. 4.
You can see the stop cooking time at any time
by following instruction No. 1.