BBC Bircher ArtMotion 2 User manual






Radarfield


ArtMotion 2
ArtMotion 2
3 m
–
+
–
+
+
–
1m
2m
3m
1m
2m
0m
0m
1m
2m
3m
4m
2.2 m

90°
1m
2m
3m
1m
2m
0m
0m
1m
2m
3m
4m
2.2 m
1

ArtMotion 2
Connecting
Observe the national and international regulations on door safety.
Only trained, qualifi ed personnel may mount and start up the detector.
The unit may only be opened and repaired by the manufacturer.
The unit may only be operated from a safety extra-low voltage (SELV) system with safe electrical separation.
Always consider the safety functions of your application as a whole, never just in relation to one individual section of the system.
The installer is responsible for carrying out a risk assessment and installing the detector and the door system correctly.
Avoid touching any electronic components.
The door drive and transom profi le must be earthed correctly.
Start-up
2Montage
Original instructions
Recommended start-up sequence: I. Mounting II. Connection
Mounting
I
General
Safety instructions
1
1. Remove cover hood 2. Lay and connect cable 3. Mount detector
Microwave motion detector for opening automatically controlled doors
1. Position drill template
2. Drill the holes, remove drill template
3. Lay cable and mount detector
Mounting of the detector
II
Electrical connections3
Mechanical fi ne tuning
4
Wide radar fi eld
min. = 0.8 x 1.6 m
max. = 2.3 x 4.8 m (WxD)
Inclination angle: 35° Inclination angle: 35°
Radar fi eld
 Hood
 Light window detector indication
Cable bushing
Mounting
Microwave module
LED microwave: green
Potentiometer
min. = 1.6 x 0.8 m
max. = 4.8 x 2.3 m (WxD)
turn 90° Narrow radar fi eld
Controller
Power
Supply
Radar
output Radar
white
brown
white
green
Cable yellow
brown
green
yellow
Manual settings of the
inclination
0° ... +45° in 5° steps
12–36 VDC
12–28 VAC
ENGLISH
351084B
09/19

2
5
Confi guration by hand of radar fi eld with potentiometer
FCC approval10
WEEE9
Smallest radar fi eld medium radar fi eld Largest radar fi eld
Factory settings
Potentiometer
Radar function Description
Field size
1 = Smallest radar fi eld
2 ... 8 = Medium radar fi eld
9 = Largest radar fi eld size
green LED Fault Remedy
Continuously
lit
Radar tripping when door is closing 1. Set angle of radar further away from the door.
2. Adjust radar fi eld size.
Radar false tripping without
apparent external infl uence
1. Avoid light sources (e.g. fl uorescent tubes) in the immediate vicinity of the detector.
2. No moving objects (plants, advertising posters, etc.) in the vicinity of the detector.
3. Avoid strong vibration at the radar detector.
4. Possible infl uence from a second radar detector in the vicinity (very unlikely).
Contact11
Technology Radar 24.125 GHz
Mounting height 1.8 – 4 m
Operating voltage 12–36 VDC / 12–28 VAC
Operating current max. 32 mA at 24 VDC
Power consumption max. 1.3 W
Output radar
max. switching voltage: 48 VAC / VDC
max. switching current: 120 mA
max. switching capacity: 550 mW
Protection type Suitable for use acc. to IP54
Operating temperature –20° to 60° C
Dimensions 120 x 64 x 44 mm (L x W x D)
Weight 95 g
Cable length 3 m
7Technical data
Remedying malfunctions6
EU Declaration of Conformity8
Designed in Switzerland / Made in China
BBC Bircher Smart Access, BBC Bircher AG, Wiesengasse 20, CH-8222 Beringen, www.bircher.com
This device meets the requirements of Part 15 of the FCC regulations and the RSS-210 standard of Industry Canada.
Warning: Changes or modifi cations made to this device may void the FCC authorisation to operate this device.
See attachment
Devices with this symbol must be treated separately during disposal. This must be done in accordance with the laws of
the respective countries for environmentally sound disposal, processing and recycling of electrical and electronic equipment.