BCP SKY4898 User manual

SKY4898
Ver. 3
Adjustable Barbell Rack
and Weight Bench
INSTRUCTION
MANUAL

• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws, and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is
completely assembled.
• Be aware that some parts are heavy and have sharp edges.
• If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
2|
HARDWARE
1
2 PCS
M8x65mm
BOLT
M8x55mm
BOLT
M10 NUT
2
1 PC
3
8 PCS
M10x65mm
BOLT
4
4 PCS
5
4 PCS
M10x65mm
CARRIAGE
BOLT
M8x20mm
SCREW
M10 WASHER
6
4 PCS
7
8 PCS
M6 PIN
8
4 PCS
TOOLS REQUIRED
UP TO 60 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
330 LBS
CAPACITY
LBS
NOTICE
WRENCH
(PROVIDED)
ALLEN WRENCH
(2 PROVIDED)

| 3
HARDWARE
9
2 PCS
M8x60mm
CARRIAGE
BOLT
M8 NUT M8 WASHER
10
5 PCS
11
7 PCS
M8 LONG PIN
12
1 PC
13
1 PC
M8 SHORT PIN
D
1 PC
BENCH LEG
PARTS
1 PC
BENCH
A
2 PCS
SIDE FRAME
B
1 PC
ROUND SUPPORT
F
E
1 PC
SQUARE SUPPORT
2 PCS
SIDE LEG
C

PRODUCT ASSEMBLY
1Attach part H bench support to part D bench leg with two part 9 carriage bolts and two part 10 nuts.
9
10
PARTS
G
2 PCS
BRACKET
2 PCS
ARM
I
H
1 PC
BENCH SUPPORT
J
2 PCS
UPPER SIDE FRAME
x2
x2
4|
D
H

| 5
PRODUCT ASSEMBLY
2Attach the bench leg to part A bench with a part 2 bolt, part 11 washer, and part 10 nut. Insert
the part 13 short pin.
Attach part F round support with two part 1 bolts, two part 11 washers, and two part 10 nuts.
1x2
2
13
F
10 x3
11 x3
A

PRODUCT ASSEMBLY
3Attach two part C side legs to two part B side frames with four part 5 carriage bolts, four part 7
washers, and four part 3 nuts.
Insert two part J upper side frames and secure them with two part 8 pins.
6|
Bx2
Cx2
Jx2
5
x4
7
x4
3
x4
8x2

PRODUCT ASSEMBLY
4Attach the round support to the side frames with two part 6 screws and two part 11 washers.
Attach part E square support with four part 4 bolts, four part 7 washers, and four part 3 nuts.
| 7
E
7x4
4x4
3x4
6x2
11 x2

PRODUCT ASSEMBLY
5Secure two part G brackets with two part 8 pins.
Attach two part I arms with two part 6 screws and two part 11 washers.
8|
I6x2
11 x2
x2
x2
G
8x2

FEATURES
1
Remove pins to adjust the height of brackets and side frames.
| 9

ADJUSTABLE STRAP:
Use to hold feet during exercises
Flip out the bench leg to transform into an incline bench.
FEATURES
10 |