
| 3
• Please do not exceed the weight limitations of this item.
• Do not stand on or use any part of this item as a step ladder.
• Firmly secure all bolts, screws, and knobs before use.
• Reconfirm that all bolts, screws, and knobs are secure every 90 days.
• Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
• If any parts are missing, broken, damaged, or worn, stop using this item until repairs are made and/or
factory replacement parts are installed.
• Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
Please retain these instructions for future reference.
NOTICE
TIGHTENING CAMLOCKS
1. Screw cam bolt
in completely.
2. Insert cam bolt and cam lock into
designated holes.
3. Screw cam lock
clockwise to secure
cam bolt.
1
14 PCS
M8 DOWEL CAM BOLT
2
12 PCS
CAM LOCK
3
12 PCS
HINGE
4
2 PCS
5
4 PCS
M3.5 X 14MM
SCREW
M4 X 16MM
SCREW
6
1 PC
KNOB
7
1 PC
M4 X 35MM
SCREW
8
4 PCS
HARDWARE
TOOLS REQUIRED
PHILLIPS
SCREWDRIVER APPROXIMATELY
30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY