BCP SKY5172 User manual

SKY5172 + SKY5829 + SKY5830
Ver. 3
INSTRUCTION
MANUAL
3-Piece Faux Leather
Converting Sofa Set

bestchoiceproducts.com
Parts are located in
the compartment
underneath the item.
Make sure to remove
all parts before
assembly.

As shoppers, we’re always trying
to find the perfect balance between
quality & value. At BCP, we believe
we’ve achieved that. Our diverse
catalog of everyday essentials is
tailored especially to our customers
& guaranteed to hit that sweet
spot of high quality & low price.
Always.

Please retain these instructions for future reference.
HARDWARE
TOOLS REQUIRED
NOTICE
UP TO 30 MIN.
ASSEMBLY
1 PERSON
ASSEMBLY
200 LBS
OTTOMAN
CAPACITY
LBS
250 LBS
SINGLE SEAT
CAPACITY
LBS
500 LBS
FUTON
CAPACITY
LBS
•Please do not exceed the weight limitations of this item.
•Do not stand on or jump on any part of this item.
•Firmly secure all bolts, screws and knobs before use.
•Reconfirm that all bolts, screws, and knobs are secure every 90 days.
•Do not use or store this item in the proximity of open flame or flammable/combustible chemicals.
•If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made
and/or factory replacement parts are installed.
•Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the
product warranty.
16 PCS
M4x25mm
SCREW
16 PCS
M4 WASHER
ALLEN WRENCH
(PROVIDED)
1 2
1 PC
FUTON
1 PC
SINGLE SEAT
1 PC
PARTS
OTTOMAN
ABC
2 PCS
ARMREST
8 PCS
STRAIGHT LEG
4 PCS
ANGLED LEG
DEF
4|

2
x8
x8
1
x2
E
x2
F
| 5
PRODUCT ASSEMBLY - FUTON
1
2
Remove legs and hardware from the compartment underneath the part A futon.
Screw in two part E straight legs.
Attach two part F angled legs with eight part 1 screws and eight part 2 washers, four
screws/washers per leg.
A

6|
3Place two part D armrests.
PRODUCT ASSEMBLY - FUTON
Unfold the center armrest to
access the two cupholders.
x2
D

| 7
PRODUCT ASSEMBLY - SINGLE SEAT
1
2
Remove legs and hardware from the compartment underneath the part B single seat.
Screw in two part E straight legs.
Attach two part F angled legs with eight part 1 screws and eight part 2 washers, four
screws/washers per leg.
2
x8
x8
1
x2
E
x2
F
B

PRODUCT ASSEMBLY - OTTOMAN
1
2
Remove legs from the compartment underneath the part C ottoman.
Screw in four part E straight legs.
8|
x4
E
C

ADJUSTING THE BACKREST
The futon and single seat lock at three positions: upright, leaning back, and flat.
To adjust the position, bring the backrest all the way forward, then lean it back to your desired position.
CALIFORNIA PROPOSITION 65
WARNING: This product can expose you to Diisononyl phthalate (DINP), which is known to the State of
California to cause cancer. For more information go to www.P65Warnings.ca.gov
| 9

Check out more great products:
bestchoiceproducts.com