Beaba BABYMILK SECOND User manual

2
BABYMILK SECOND

3 4
1
5
2
7
8
3 4
9
6
10

10 11
PLEASE READ THESE INSTRUCTIONS CAREFULLY AND KEEP FOR
FUTURE REFERENCE.
1 Steam vent
2 Insulating ring
3 Steam cover
4 Baby bottle (not included)
5 Baby bottle tray
6 Water tank
7 Heating unit
8 Knob + indicator light
9 Timing indicator in minutes
10 Max. level water
IMPORTANT SAFEGUARDS
When using this electrical appliance, the basic safety precautions
below should be followed:
1. Read all instructions.
2. Before use, check that the voltage power corresponds to the
one shown on the appliance nameplate.
3. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualied persons in
order to avoid safety hazards.
4. Do not operate any appliance with a damaged cord or plug or
after the appliance malfunctions or has been damaged in any
manner. Return appliance to the nearest authorized service
facility for examination, repair, or adjustment.
5. Always place this appliance on a rm, at and level surface
away from water.
6. Keep the appliance out of children’s reach.
7. Do not allow children to pull the power cord or tamper with the
appliance, to avoid personal injury or damage to the appliance.
8. Close supervision is necessary when appliance is used by or
near children.
9. Before serving, unplug cord from wall outlet and dish. Do not
leave cord within child’s reach.
10. Do not place the appliance on or near a hot gas or electric
burner, or in a heated oven.
11. Do not leave the cord hanging over the edge of tables or

11
counters.
12. Do not let the cord touch hot surfaces.
13. Do not operate the unit at the same time as other appliances
with large power consumption.
14. During use, please be mindful of the steam coming out of the
steam vent.
15. Always use oven gloves when handling hot parts; avoid hot
steam rising from the steam vent at all times when in use. After
use, remove the housing carefully to avoid being scalded by
steam.
16. The water in the appliance remains hot after other parts of the
appliance have cooled down, so please handle carefully.
17. Do not touch hot parts such as base, heating element, housing
lid etc. to avoid being scalded. Use handles or knobs.
18. Avoid sudden temperature changes,such as adding refrigerated
foods into bottle.
19. Ideally, do not move the appliance while in use. If necessary,
exercise extreme caution to avoid being scalded.
20. Ensure the steam vent is not blocked and do not insert foreign
objects into the vent.
21. The use of non-recommended attachments or those sold by
vendors other than the manufacturer may cause re, electric
shock or injury.
22. To protect against electrical shock do not immerse cord, plugs,
or appliance in water or other liquid.
23. Do not use outdoors.
24. Do not overheat food. Pour a few drip inside your wrist to check
that the food temperature has not been exceeded.
25. Only use clean water in the water tank to operate the unit.
26. Unplug from outlet when not in use, before assembly,
disassembly and cleaning. Allow to cool before putting on or
taking off parts.
27. To disconnect, turn any control to «off», then remove plug from

12 13
wall outlet.
28. Make sure you test the food is at safe temperature before
serving.
29. This appliance is strictly not for use by children.
30. Appliance should only be used by persons with reduced physical,
sensory or mental capabilities or lack of experience/ knowledge
under proper supervision or following instructions concerning
use of the appliance in a safe way, assuming understanding of
the hazards involved.
31. Do not allow children to play with the appliance under any
circumstances.
32. Do not use appliance for other than intended use.
33. This appliance is intended to be used for household and similar
applications.
34. a) A short power-supply cord (or detachable power-supply
cord) is provided to reduce the risk resulting from becoming
entangled in or tripping over a longer cord.
b) Longer detachable power-supply cords or extension cords
are available and may be used if care is exercised in their
use.
c)If a longer detachable power-supply cord or extension cord
is used:
1)The marked electrical rating of the cord set or extension
cord should be at least as great as the electrical rating of the
appliance;
2) The cord should be arranged so that it will not drape
over the countertop or tabletop where it can be pulled on by
children or tripped over unintentionally; and
3) If the appliance is of the grounded type, the cord set or
extension cord should be a grounding-type 3 wire cord.
35. This appliance has a polarized plug (one blade is wider than
the other). To reduce the risk of electric shock, this plug is
intended to t into a polarized outlet only one way. If the plug

13
does not t fully into the outlet, reverse the plug. If it still does
not t, contact a qualied electrician. Do not attempt to modify
the plug in any way.
36.SAVE THESE INSTRUCTIONS.
OPERATION
BEFORE FIRST USE
• Unpack all of the appliance components.
• Clean all parts (see “CLEANING AND MAINTENANCE”).
Before using this appliance, it is recommended to firstly clean the appliance and
related accessories thoroughly.
IMPORTANT
Read before using.
The device’s various heating time settings have been programmed for a standard
Beaba plastic feeding bottle. Some feeding bottles may present differences in
temperature. Therefore, it is necessary to adjust the device’s heating time to the
type of bottle used:
Wide-neck bottle Reduce heating time (according to the type of bottle)
Glass bottle Greatly reduce heating time (according to the type of bottle)
To change heating time, move the program button (to the left –> decrease/ to the
right –> increase). Also:
• Heating time for a Beaba standard bottle is programmed for an initial temperature
of 20°C (68°F) or 5°C (41°F) and any variation in the initial water temperature will
have an effect on the final temperature.
• In the event of a subsequent heating cycle within an hour, heating time must be
reduced.
• For an optimal temperature, the feeding bottle should be removed when the
light switches off. Therefore, the warming function described in the instructions
should be used with caution.
It is extremely important to always check the temperature of the feeding
bottle contents before giving it to the child.
USING THE APPLIANCE
Warming baby bottle (water or milk) or baby food jar
• Fill the water tank in the base with MAX level water.
• Put the tray into the heating unit.
• Fill baby bottle with desired amount of water or milk.
• Place the baby bottle on tray.
• Put the steam cover on base, then turn clockwise to fix in position.
• Connect unit to power source.

14 15
• Choose the setting by turning the knob, referring to the following table (setting 1
is around 1 min, setting 5 is around 5 mins).
BÉABA baby bottle (Plastic)
Size of
baby bottle
Quantity
of water
Original
temperature
Time to set
(min)
120 ml
60 ml Chilled 3.5
Ambient 2.5
90 ml Chilled 3.5
Ambient 3
240 ml
120 ml Chilled 3.5
Ambient 2.5
180 ml Chilled 3.5
Ambient 2.5
330 ml
240 ml Chilled 4
Ambient 3
300 ml Chilled 4.5
Ambient 3
BÉABA baby bottle (Glass)
Size of
baby bottle
Quantity
of water
Original
temperature
Time to set
(min)
110 ml
60 ml Chilled 2
Ambient 1.5
90 ml Chilled 2
Ambient 2
250 ml
150 ml Chilled 2.5
Ambient 2
240 ml Chilled 3
Ambient 2.5

15
• Press the button to start the unit.
• At the end of the cycle, there is an audible signal (5 beeps) and flashing indicator
light. Press the button again and unit will stop beeping, then unplug the appliance.
• Lift the housing vertically by holding the ring to avoid tipping over the milk bottle.
Note: Before drinking, screw the cap tight and shake the bottle lightly to
ensure an even milk temperature.
Sterilizing utensils
• Fill the water tank in the base with MAX level water.
• Put the tray into the heating unit.
• Empty the baby bottle, then stand it upside down on the tray.
• Put the steam cover on the base, then turn clockwise to fix in position.
• Connect unit to power source.
• Turn the knob to setting 5 (around 5 minutes).
• Press the button to start the unit.
• At the end of the cycle, there is an audible signal (5 beeps) and flashing indicator
light. Press the button again and the unit will stop beeping, then unplug the
appliance.
CLEANING AND MAINTENANCE
• Before cleaning, unplug the appliance and allow it to cool down completely.
• Never immerse the housing in water to clean.
• Wipe the outside surface with a wet cloth.
• Do not use corrosive detergent, detergent with chemical powders or hard metal
wire mesh to clean, as this will damage the appliance surface, affect the service
life and cause safety problems.
• Do not use sharp items or metal tools to touch components in the middle of the
heating plate, as this may cause electric shock.
• When not in use, clean and dry the appliance, and then put it into the packing
box and store in a dry place with good ventilation.
• Steam cover and baby bottle tray are dishwater safe and can be sterilized.
• We recommend you use fresh water to warm milk or sterilize utensils for every use.
• Every 50 cycles, fill the tank with water and white vinegar or the Béaba cleaning
product for Babycook (15ml white vinegar +15ml water).
• Leave to soak until deposits have completely disintegrated (one night).
• Rinse with clear water several times.

0717
[email protected]
www.beaba.com
BÉABA
121, voie Romaine - CS 97002 - Groissiat
01117 Oyonnax cedex - FRANCE
MADE IN CHINA
Pour activer votre garantie,
télécharger l’application
Béaba & Moi sur App Store ou
Google play.
To activate your guarantee,
download the Béaba & Me
application on App Store or
Google play.