Honeywell 5912 User manual

Read this manual carefully and never store it inside the safe!
User Guide
DEPOSITORY SAFE
with Digital Lock
Package Includes:
Model 5912
ENGLISH
1 – Depository Safe
1 – Operation Manual
2 – Override Access Keys
1 – Floor Mat
1 – Mounting Kit w/ Bolts
Please carefully check the above list to confirm all items have been received. If any items
are missing, please contact Consumer Assistance. (See page 9 for contact information.)
Operation
Manual
Safe with Digital Lock
Override
Access Keys Mounting
Kit w/ Bolts

WELCOME / DO NOT RETURN SAFE TO STORE /
PRODUCT REGISTRATION...................................................................................................... PAGE 2
INSTALL BATTERY / UNLOCK & OPEN YOUR NEW SAFE .......................................... PAGE 3
PRIMARY & SECONDARY USER CODES............................................................................PAGE 4
OVERRIDE ACCESS KEY / USING THE DROP DOOR....................................................PAGE 6
ANCHORING YOUR SAFE........................................................................................................ PAGE 7
SECURE LOCKOUT PERIOD / LOST OR FORGOTTEN USER CODES /
CARE AND MAINTENANCE / NOTES..................................................................................PAGE 8
CONSUMER ASSISTANCE.......................................................................................................PAGE 9
ORDERING ADDITIONAL OVERRIDE ACCESS KEYS / SAFE
IDENTIFICATION RECORD / DIGITAL USER CODE RECORD ................................. PAGE 10
LIMITED WARRANTY .................................................................................................... BACK COVER
For Your Protection
• Do not remove the Serial Number tag from the safe.
• Never Store Override Access Keys inside safe.
• Record all Safe Identification Numbers on Safe Identification Record (page 10).
• Save this manual and NEVER keep it inside the safe.
1
INDEX

Your Honeywell Steel Depository Safe will provide years of safe and secure protection for
your currency and check deposits, important documents and other personal items. All
Honeywell safes are designed and built using the highest manufacturing standards to
ensure maximum user satisfaction under a variety of conditions. With proper care, your
Honeywell safe will provide peace of mind for many years to come.
Thank you and enjoy!
DO NOT RETURN SAFE TO STORE
If you are missing parts or have difficulty operating your safe, please contact our
Consumer Assistance Department by telephone. Stores will not accept returned
products without prior authorization. You must first contact our Consumer Assistance
Department (See page 9 for contact information).
WELCOME
2
Please go to the following webpage to register your product:
www.hymaninc.com/product-registration/
PRODUCT REGISTRATION

1. To open the safe, turn handle counterclockwise (to the left) until it stops. The handle should be in
the vertical position. Always do this before entering the code. (Figure 1)
2. Enter the preset factory code “168” followed by the # key.
3. If the code is entered correctly, the keypad will beep twice, a green LED will light up, and you will
hear a click, indicating that the door is now unlocked. Turn handle clockwise (to the right) to open.
(Figure 2 & 3)
Note: You will have approximately 5 seconds to open the safe before it re-locks, at which point you
will need to reenter the code to open the safe. If the code is entered incorrectly, the safe will begin
beeping and the yellow LED light will flash continuously. Repeat Step 2.
UNLOCK & OPEN YOUR NEW SAFE
Figure 1 Figure 2 Figure 3
3
The battery must be installed before using your safe. The battery compartment is located at the
bottom of the digital keypad.
1. Open the battery cover under the keypad housing. (Figure 1)
2. Pull out the battery connection wire and attach the 9 volt battery (not included). (Figure 2)
3. Insert the connected 9 volt battery into the housing and close the battery cover. (Figure 3)
INSTALL BATTERY
Note: If the red LED is on, it is an indicator that the batteries are weak and must be changed
immediately. The user codes will not be erased if the battery is weak or removed. To replace
the battery please follow STEPS 1 - 3.
If your battery is completely dead and you cannot open the safe by using the digital keypad,
use the override access key to open safe. The use of non-alkaline or rechargeable batteries
is NOT RECOMMENDED.
Figure 1 Figure 2 Figure 3

Your new safe is equipped with a digital lock that can be operated with up to two different user codes.
· Primary Code: This code is for the primary operators of the safe.
·Secondary Code: This code can be provided to someone with limited or one-time access to the safe.
Codes can contain 18 digits, however, we recommend a minimum of 3 digits. An 8-digit code will
provide maximum security for your safe.
The Primary User Code must be programmed first. Once that code is tested and operating
successfully program the Secondary User Code.
PRIMARY & SECONDARY USER CODES
PRIMARY USER CODE: PROGRAMMING & TESTING
Follow the steps on page 3 under UNLOCK & OPEN YOUR NEW SAFE.
1. With the safe unlocked and door open, locate and press the red RESET button on the inside edge
of the safe door. (Figure 1) You will hear two beeps and a Yellow LED light will turn on. (Figure 2)
2. Enter a new 18 digit Primary User Code of your choice, followed by the * key. (Figure 3)
Your Primary User Code is now set. Close the safe door and test the code to make sure it is
working properly before programming the Secondary User Code.
3. Make sure handle is turned all the way to the left. It should be in the vertical position. (Figure 4)
4. Enter your Primary User Code followed by the # key.
· If the code is entered correctly, the keypad will beep twice, the green LED light will turn on and
you will hear a click, indicating that the safe is now unlocked. Turn the handle clockwise (to the
right) to open. (Figure 5 & 6)
Note: You will have approximately 5 seconds to open the safe before it re-locks, at which point
you will need to reenter the code to open the safe.
· If the code is entered incorrectly, the safe will begin beeping and the yellow LED light will flash
continuously. Repeat Step 4.
If you continue to have trouble opening the safe, use the override keys to unlock the safe and
reset the Primary User Code beginning with Step 1.
4
Figure 1 Figure 2 Figure 3
Figure 4 Figure 5 Figure 6

5
SECONDARY USER CODE: PROGRAMMING & TESTING
1. With the safe in the closed and locked position, turn the handle all the way to the left.
It should be in the vertical position. Enter the preset factory code for the Secondary User
“12345678” followed by the # key. (Figure 1) Turn the handle clockwise (to the right) to
unlock and and open the safe.
2. With the safe door open, press the “0” key twice.
3. Locate and press the red RESET button on the inside edge of the safe door. (Figure 2)
You will hear two beeps and a Yellow LED light will turn on. (Figure 3)
4. Enter a new 18 digit Secondary User Code of your choice, followed by the * key. Your Secondary
User Code is now set. Close the safe door and test the code to make sure it is working properly.
5. Make sure the handle is turned all the way to the left. It should be in the vertical position. (Figure 4)
6. Enter your Secondary User Code followed by the # key.
· If the code is entered correctly, the keypad will beep twice, the green LED light will turn on and
you will hear a click, indicating that the safe is now unlocked. Turn the handle clockwise (to the
right) to open. (Figure 5 & 6)
Note: You will have approximately 5 seconds to open the safe before it re-locks, at which point you
will need to reenter the code to open the safe.
· If the code is entered incorrectly, the safe will begin beeping and the yellow LED light will flash
continuously. Repeat Step 6.
If you continue to have trouble opening the safe, use the override keys to unlock the safe and reset
the Secondary User Code beginning with Step 2.
Figure 2
2x
Figure 1
Figure 4 Figure 5 Figure 6
Figure 3

OVERRIDE ACCESS KEY
Your safe includes 2 override access keys which allow immediate access to your safe, in the event
you forget your user codes or the battery needs to be replaced.
1. Remove the sticker from the front of the keypad to access the faceplate mounting screw.
Remove the screw using a Phillips head screwdriver. (Figure 1)
2. Pull the keypad away from the housing and insert the override access key as shown. (Figure 2)
Turn counterclockwise. (to the left)
3. Turn handle clockwise (to the right) and pull safe door open. (Figure 3)
4. Turn override access key clockwise to the right and remove. Replace the keypad over the housing
bottom first then push forward into place, secure with screw and replace sticker. (Figure 4)
5. Store the override access key in a safe place away from the safe.
Figure 1 Figure 2 Figure 3 Figure 4
6
Depository safes are designed with drop doors for quick deposits of cash, checks, documents and
other valuables without having to unlock the safe. To use the drop door follow the steps below.
1. Locate and pull down on the door handle. (Figure 1 and Figure 2)
2. Once open, drop the item you would like to deposit onto the drawer. (Figure 3)
3. Lift the door upward to the closed position and the contents will drop down to the lower
section of the safe. (Figure 4)
Note: If using the depository safe for items other than cash / checks, it is recommended that
fragile or heavy items not be deposited as they may be damaged or cause damage. These items
should be placed in safe through the lower safe door.
USING THE DROP DOOR
Figure 1 Figure 2 Figure 3 Figure 4

For additional security, you have the option of bolting your safe to the floor. Pre-drilled anchoring
holes and the included hardware kit allow you to secure your safe to concrete or wood surfaces.
For metal surfaces, additional hardware will be needed. Contact your local home center for assistance.
Note: Bolting/unbolting of the unit is at the consumer’s expense and discretion. LH Licensed
Products is not responsible for any costs incurred if the unit is damaged.
If you have any questions about mounting the safe, please check with your local home center/
hardware retailer or independent contractor.
To secure your safe:
1. Find a suitable and convenient location for your safe.
2. Empty the safe and remove the floor mat.
3. Locate the pre-drilled holes on the inside floor of the safe.
4. With the safe in your desired location, use a pencil or other tool to mark the floor through the
pre-drilled holes. Move the safe aside.
Note: Only 2 of the 4 pre-drilled holes are needed for mounting purposes. Choose two that
are positioned diagonally from each other. (Figure 1)
5. Drilling
For concrete surfaces:
Using a 1/2 in (12mm) drill bit, drill a hole at each of the 2 marks you made previously,
approximately 3 inches in depth. Remove any excess dust. (Figure 2)
Place the 2 anchors into the drilled holes and tap gently with a hammer until the anchors
are flush with the floor. (Figure 3)
For wood surfaces:
Using an 11/32 in (10mm) drill bit, drill 2 pilot holes at each of the 2 marks you made previously.
Remove any access dust. (Figure 2)
The anchors are not needed for wood floors.
6. Place the safe back over the holes and secure in place using the 2 lag screws provided;
tighten with a 1/2 inch socket wrench. (Figure 4)
7. Once completed, replace the floor mat and close the safe door. Rotate handle counterclockwise
(to the left) to secure the lock.
ANCHORING YOUR SAFE
1
2
Figure 1 Figure 2 Figure 3
Only for Concrete
Mounting
Figure 4
7

NOTES
8
CARE AND MAINTENANCE
When properly maintained, your safe will continue to operate for many years. In order to ensure
optimal performance of your safe, please follow these simple precautions:
CLEAN HANDS - Never attempt to operate the digital keypad if your hands have excessive dirt,
debris or liquids on them.
CLEAN SAFE – To clean the surface of your safe, it is recommended that you use a mild cleaner
(e.g., window cleaner) to avoid scratching or discoloring the surface. Always wipe dry and NEVER
use abrasive cleansers on the safe or digital keypad.
For future reference, store this Operation and Installation Guide in a secure area away from the
safe.
SECURE LOCKOUT PERIOD
If the wrong user code is entered into the keypad 3 times in a row, the keypad will automatically go
into lockout mode and you will not be able to open the safe using the digital keypad for 15 minutes.
During the lockout period you can access the safe using the override access keys.
LOST OR FORGOTTEN USER CODES
LOSS OF BOTH PRIMARY AND SECONDARY USER CODES
It is recommended that you record your new user codes in the “Digital User Code Record” section
on page 10 and keep this manual in a secure location away from the safe. However, if you lose
or forget either the primary or secondary user codes, you may open the safe using the override
access keys. Follow the instructions on pages 4 & 5 to reset the codes.

WEBSITE:
www.honeywellsafes.com
www.taruna-jaya.com
ADDRESS:
Consumer Assistance Dept.
LH Licensed Products, Inc.
860 East Sandhill Avenue Carson, CA 90746 USA
E-MAIL:
[email protected]
TELEPHONE:
US/Canada 18773545457 (Toll Free)
Indonesia 62216410845, 64701938
Mexico 018002882872 After English voice recording stops you must then enter
8008601677 to complete your call. (Toll Free)
Australia 001180053257000 (Toll Free)
Germany/New Zealand 0080053257000 (Toll Free)
Other Countries XX*3103235722 (Toll Charges Apply)
XX*- Dial U.S. Country Code first
CALL CENTER HOURS:
US/Canada 7am – 5pm (PST**) Mon – Fri (Subject to change)
CALL BACK HOURS:
Other Countries 7am – 8pm (PST**) Mon – Fri (Subject to change)
PST**- Local time in Los Angeles, CA, USA
INTERNATIONAL CALL BACK HOURS:
If you need to speak with a consumer assistant and cannot contact us during the Call
Center hours above, please send an email or leave a telephone message, including your Name,
Telephone Number and the best time for us to contact you during the Call Back hours above,
and we will make every effort to contact you and help answer any of your questions or concerns.
* Insert correct Country Code
** Local Time based on Los Angles California USA
CONSUMER ASSISTANCE
9