Bedsure Blanket & Mattress Pad User manual

Blanket & Mattress Pad

The default the time setting of this blanket is 10 hours auto-o. If you turn o the
product during using, the product will re-start the timer of 10 hours auto-o. Any
changing of the heat setting will not aect the time setting.
CONTROLLER FUNCTION
1.Please connect the controller to the coupler on the blanket first then connect to the
power. The LED on the controller will stop lighting after a few seconds then go into the
standby mode.
2.In the standby mode, please press start key on the controller, then the product will start
work on the default heat level 1(green light). If you want warmer feeling, you can keep
pressing the start key, then the heated blanket will go into the next heat level (heat level 2:
yellow light, heat level 3: orange light, heat level 4: red light).
TIME SETTING

WARRANTY AND CUSTOMER SUPPORT
If you need help regarding product issues, after-sales service,
or other relevant problems, please contact us
via Amazon customer service or ocial website.
BEDSHE INTERNATIONAL CO., LTD. 20651 Golden Springs Dr.,
Ste. 277 Diamond Bar, CA 91789.USA