Bedsure BS-HP2433 User manual

HEATING PAD FOR NECK AND BACK
-FOR PERSONAL USE ONLY-
IMPORTANT NOTICE
MODEL #BS-HP2433
read the entire manual carefully
before using this service

22.

34
5

Before each use, always inspect the product to ensure there is nodamage to the
power cord, the Control, or the Pad.
The Pad Connector and Control Connector are designed to connect only one way.
Align the inner prongs and then push togetheruntil Connectors are touching
check with your healthcare providerbefore using witha pacemaker or any medical
devices
do not plug into the wall outlet until you have connected the controllercord to the
product
CONTROLLER COMPONENTS & FUNCTION DESCRIPTION
1 - Display
2 - ON/OFF Button
3 - Time Setting Button
4 - + and - Buttons
• Turn on with the switch button, the
default level is the standby level 01,
press the"+" "-" button to regulate
the setting up to level highest 06.
• Press thetime setting button, thedisplay lasts for
2.0 hours by default, press the"+" "-" button to
adjust the timing,If there is no operation after
flashing for 3 seconds,it will return to the previously
set heating level.
• Press the "+" and "-" buttons to adjust the heating level
（01-02-03-04-05-06）and the timing（1.0-1.5-2.0)H.
AUTO SHUT OFF MODE
This product will turn o after a set duration of time. Setting times have 1.0,1.5 and
2.0 Hours
Burns can occur regardless of the control setting; check skin under Pad frequently.
Unplug the product when it is not inuse.
CAUTION