Beko BX 109 C User manual

Mobile room air
conditioner
Installation Manual
BX 109 C BX 109 H BX 112 C
BX 112 H BX 109 AC BX 109 AH
EN FR

Please read this user manual rst!
Dear Customer,
Thank you for preferrng a Beko product. We hope that you get the best results
from your product whch has been manufactured wth hgh qualty and state-of-
the-art technology. Therefore, please read ths entre user manual and all other
accompanyng documents carefully before usng the product and keep t as a
reference for future use. If you handover the product to someone else, gve the user
manual as well. Follow all warnngs and nformaton n the user manual.
Meanings of the symbols
Followng symbols are used n the varous secton of ths manual:
Ths product has been produced n envronmentally frendly, modern facltes
Comples wth the WEEE Regulaton. Does not contan PCB.
C
Important nformaton or
useful hnts about usage.
A
Warnng for hazardous
stuatons wth regard to
lfe and property.
Warnng to actons that
must never perform.
B
Warnng for electrc shock.
Ths symbol shows that ths
applance uses a flammable
refrgerant. If the refrgerant
s leaked and exposed to
an external gnton source,
there s a rsk of fre.
Warnng for hot surfaces.
Do not cover t.
Ths symbol shows that the
operaton manual should
be read carefully.
Ths symbol shows that a
servce personnel should
be handlng ths equpment
wth reference to the
nstallaton manual.

Moble room ar condtoner / Installaton Manual 3 / 88 EN
Contents
1 Safety precautons 5
2 Parts descrpton 21
2.1 Front vew. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2.2 Rear vew . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
3 Control panel 23
3.1 TEMP. ndcator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
3.2 Functon buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4 Operaton 25
5 Accessores 27
6 Notce of nstallaton 28
6.1 Unpackng nspecton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.2 Safety prncples for nstallng ar condtoner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.3 Requrements for nstallaton poston . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .28
6.4 Installaton envronment nspecton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
7 Installaton 30
7.1 Gude of customer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.2 Select a best locaton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .30
7.3 Duct mount nstructon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
7.4 Install the wndow slder kt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
7.5 Install the exhaust duct nto the wndow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
7.6 Wthout nstallaton. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
7.7 Water dranage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34

4 / 88 EN Moble room ar condtoner / Installaton Manual
Contents
8 Mantenance 36
8.1 Clean the unt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
8.2 Clean the ar lter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
9 Troubleshootng 38
10Installaton nstructons 39
10.1 F-Gas nstructon. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
11 Specfcaton 40

Moble room ar condtoner / Installaton Manual 5 / 88 EN
1 Safety precautons
Warning
Ths ar condtoner uses R290 flammable refrgerant.
C
Note:
Ar condtoner wth R290 refrgerant, f roughly
treated, may cause serous harm to the human body or
surroundng thngs.
• The room space for the nstallaton, use, repar, and storage of ths
ar condtoner should be greater than 12m2.
• Ar condtoner refrgerant can not charge more than 250g.
• Do not use any methods to speed up defrost or to clean frosty parts
except for partcular recommended by manufacturer.
• The applance shall be stored n a well-ventlated area where the
room sze corresponds to the room area as specfed for operaton.
• Not perce or burn ar condtoner, and check the refrgerant ppelne
whether be damaged.
• The ar condtoner should be stored n a room wthout lastng fre
source, for example, open flame, burnng gas applance, workng
electrc heater and so on.
• Be aware that refrgerants may not contan an odour.
• The storage of ar condtoner should be able to prevent mechancal
damage caused by accdent.
• The applance must be kept free from obstructon to ensure proper
functon and mtgate safety hazards.

6 / 88 EN Moble room ar condtoner / Installaton Manual
• Mantenance or repar of ar condtoners usng R290 refrgerant
must be carred out after securty check to mnmze rsk of
ncdents.
• Please read the nstructon carefully before nstallng, usng and
mantanng.
Warning
Incorrect nstallaton or operaton by not followng these
nstructons may cause harm or damage to people, propertes,
etc.
The serousness s classfed by the followng ndcatons:
• Ths applance can be used by chldren aged from 8 years and above
f they have been gven supervson or nstructon concernng use
of the applance n a safe way and understand the hazards nvolved.
Cleanng and user mantenance shall not be made by chldren
unless they are aged from 8 years and above and supervsed. Keep
the applance and ts cord out of reach of chldren aged less than
8 years.
• Ths applance s not ntended for use by persons (ncludng
chldren) wth reduced physcal, sensory or mental capabltes, or
lack of experence and knowledge, unless they have been gven
supervson or nstructon concernng use of the applance by a
person responsble for ther safety. Chldren should be supervsed to
ensure that they do not play wth the applance.
(Except for the AC wth CE-Markng )
• Ths unt s desgned for ndoor use only.
1 Safety precautons

Moble room ar condtoner / Installaton Manual 7 / 88 EN
• The applance shall be nstalled n accordance wth natonal wrng
regulatons.
• The ar condtoner must be grounded. Incomplete groundng may
result n electrc shocks.
Do not connect the earth wre to the gas ppelne, water ppelne,
lghtnng rod, or telephone earth wre.
• After nstallment, earth leakage examnaton must be carred on
through electrfyng.
• An earth leakage breaker wth rated capacty must be nstalled to
avod possble electrc shocks.
• Don’ t nstall ar condtoner n a place where there s flammable gas
or lqud. It may cause fre or exploson.
• If the power supply cord s damaged, t must be replaced by the
manufacture or ts servce agent or a smlar qualfed person.
• The specfcaton of the fuse are prnted on the crcut bord, such as:
AC 250V/5A.
• Don’t put hands or any objects nto the ar nlets or outlets.
Ths may cause personal njury or damage to the unt.
• Don’ t touch the swngng wnd vanes.
It may damp your fnger and damage the drvng parts of the wnd
vanes.
• Don’t attempt to repar the ar condtoner by yourself.
You may be hurt or cause further malfunctons.
• In lghtng storm weather, please cut off the prmary power supply
swtch n order to prevent the machne from damage.
1 Safety precautons

8 / 88 EN Moble room ar condtoner / Installaton Manual
• Don’ t use lqud or corrosve detergent to clean the applance and
don’ t splash water or other lqud onto t , otherwse, t may damage
the plastc components, even cause electrc shock.
• Don’t operate the unt n a wet room such as the bath room or
laundry rooms.
• Don’t touch the unt wth wet or damp hands or when barefoot.
• Don’t pull the unt by the cord.
• Don’t remove any part of the unt unless nstructed by an authorzed
techncan.
• Don’t move the unt, unless the power has been cut off and the
power cord s ted to the bendng and wndng column.
• Don’t operate the unt wth a damaged plug or a loose socket.
• Ducts connected to an applance shall not contan an gnton
source.
• Unplug before cleanng or mantenance operatons.
• Do not use manuals to accelerate the defrostng process or to clean,
other than those recommended by the manufacturer. The applance
shall be stored n a room wthout Contnuously operaton gnton
sources (for example: open flames, an operaton gas applance or
an operatng electrc heater.) Do not perce or burn. Be aware that
refrgerants may not contan an odour.
• The applance shall state the nsulaton of a resdual current devce
(RCD) havng rated resdual operatng current not exceedng 30mA.
• Ths applance s ntended to be used n household and smlar
applcatons such as
1 Safety precautons

Moble room ar condtoner / Installaton Manual 9 / 88 EN
- Staff ktchen areas n shops, offces and other workng
envronments;
- farm houses;
- by clents n hotels, motels and other resdental type envronments;
- bed and breakfast type envronments;
A
Warnng:
Any person who s nvolved wth workng on or breakng
nto a refrgerant crcut should hold a current vald
certfcate from an ndustry-accredted assessment
authorty, whch authorses ther competence to handle
refrgerants safely n accordance wth an ndustry
recognsed assessment specfcaton.
Servcng shall only be performed as recommended by
the equpment manufacturer. Mantenance and repar
requrng the assstance of other sklled personnel shall
be carred out under the supervson of the person
competent n the use of flammable refrgerants.
Qualfcaton requrements of mantenance personnel
1. Specal tranng addtonal to usual refrgeratng equpment
repar procedures s requred when equpment wth flammable
refrgerants s affected. In many countres, ths tranng s carred
out by natonal tranng organsatons that are accredted to teach
the relevant natonal competency standards that may be set n
legslaton. The acheved competence should be documented by a
certfcate.
1 Safety precautons

10 / 88 EN Moble room ar condtoner / Installaton Manual
2. The mantenance and repar of the ar condtoner must be
conducted accordng to the method recommended by the
manufacturer. If other professonals are needed to help mantan
and repar the equpment, t should be conducted under the
supervson of ndvduals who have the qualfcaton to repar AC
equpped wth flammable refrgerant.
Inspecton of the ste
Safety nspecton must be taken before mantanng equpment
wth R290 refrgerant to make sure the rsk of fre s mnmzed.
Check whether the place s well ventlated, whether ant-statc and
fre preventon equpment s perfect.
Whle mantanng the refrgeraton system, observe the followng
precautons before operatng the system.
Operatng procedures
1. General work area:
All mantenance staff and others workng n the local area shall
be nstructed on the nature of work beng carred out. Work n
confned spaces shall be avoded. The area around the workspace
shall be sectoned off. Ensure that the condtons wthn the area
have been made safe by control of flammable materal.
2. Checkng for presence of refrgerant:
The area shall be checked wth an approprate refrgerant
detector pror to and durng work, to ensure the techncan s
aware of potentally toxc or flammable atmospheres. Ensure that
the leak detecton equpment beng used s sutable for use wth
1 Safety precautons

Moble room ar condtoner / Installaton Manual 11 / 88 EN
all applcable refrgerants, .e. non-sparkng, adequately sealed or
ntrnscally safe.
3. Presence of fre extngusher:
If any hot work s to be conducted on the refrgeraton equpment
or any assocated parts, approprate fre extngushng equpment
shall be avalable to hand. Have a dry powder or CO2fre
extngusher adjacent to the chargng area.
4.No gnton sources:
No person carryng out work n relaton to a refrgeraton system
whch nvolves exposng any ppe work shall use any sources
of gnton n such a manner that t may lead to the rsk of fre
or exploson. All possble gnton sources, ncludng cgarette
smokng, should be kept suffcently far away from the ste
of nstallaton, reparng, removng and dsposal, durng whch
refrgerant can possbly be released to the surroundng space.
Pror to work takng place, the area around the equpment s to
be surveyed to make sure that there are no flammable hazards or
gnton rsks.
‘No Smokng’ sgns shall be dsplayed.
5. Ventlated area (open the door and wndow):
Ensure that the area s n the open or that t s adequately
ventlated before breakng nto the system or conductng any hot
work. A degree of ventlaton shall contnue durng the perod that
the work s carred out. The ventlaton should safely dsperse any
released refrgerant and preferably expel t externally nto the
atmosphere.
1 Safety precautons

12 / 88 EN Moble room ar condtoner / Installaton Manual
6.Checks to the refrgeraton equpment:
Where electrcal components are beng changed, they shall be
ft for the purpose and to the correct specfcaton. At all tmes
the manufacturer’s mantenance and servce gudelnes shall
be followed. If n doubt, consult the manufacturer’s techncal
department for assstance. The followng checks shall be appled
to nstallatons usng flammable refrgerants:
• The charge sze s n accordance wth the room sze wthn whch
the refrgerant contanng parts are nstalled.
• The ventlaton machnery and outlets are operatng adequately
and are not obstructed.
• If an ndrect refrgeratng crcut s beng used, the secondary
crcut shall be checked for the presence of refrgerant.
• Refrgeraton ppe or components are nstalled n a poston
where they are unlkely to be exposed to any substance whch
may corrode refrgerant contanng components, unless the
components are constructed of materals whch are nherently
resstant to beng corroded or are sutably protected aganst beng
so corroded.
7. Checks to electrcal devces:
Repar and mantenance to electrcal components shall nclude
ntal safety checks and component nspecton procedures. If
a fault exsts that could compromse safety, then no electrcal
supply shall be connected to the crcut untl t s satsfactorly
dealt wth. If the fault cannot be corrected mmedately but t
1 Safety precautons

Moble room ar condtoner / Installaton Manual 13 / 88 EN
s necessary to contnue operaton, an adequate temporary
soluton shall be used. Ths shall be reported to the owner of the
equpment so all partes are advsed.
Intal safety checks shall nclude:
• That capactors are dscharged: ths shall be done n a safe manner
to avod possblty of sparkng.
• That no lve electrcal components and wrng are exposed whle
chargng, recoverng or purgng the system.
• Keep contnuty of earthng.
Inspecton of cable
Check the cable for wear, corroson, overvoltage, vbraton and
check f there are sharp edges and other adverse effects n the
surroundng envronment. Durng the nspecton, the mpact of
agng or the contnuous vbraton of the compressor and the fan on
t should be taken nto consderaton.
Leakage check of R290 refrgeral
C
Note: Check the leakage of the refrgerant n an
envronment where there s no potental gnton source.
No halogen probe (or any other detector that uses an
open flame) should be used.
Leak detecton method:
For systems wth refrgerant R290, electronc leak detecton
nstrument s avalable to detect and leak detecton should not be
conducted n envronment wth refrgerant. Make sure the leak
1 Safety precautons

14 / 88 EN Moble room ar condtoner / Installaton Manual
detector wll not become a potental source of gnton, and s
applcable to the measured refrgerant. Leak detector shall be set
for the mnmum gntable fuel concentraton (percentage) of the
refrgerant. Calbrate and adjust to proper gas concentraton (no
more than 25%) wth the used refrgerant.
The flud used n leak detecton s applcable to most refrgerants.
But do not use chlorde solvents to prevent the reacton between
chlorne and refrgerants and the corroson of copper ppelne.
If you suspect a leak, then remove all the fre from the scene or put
out the fre.
If the locaton of the leak needs to be welded, then all refrgerants
need to be recovered, or, solate all refrgerants away from the leak
ste (usng cut-off valve). Before and durng the weldng, use OFN to
purfy the entre system.
Removal and vacuum pumpng
1. Make sure there s no gnted fre source near the outlet of the
vacuum pump and the ventlaton s well.
2. Allow the mantenance and other operatons of the refrgeraton
crcut should be carred out accordng to the general procedure,
but the followng best operatons that the flammablty s already
taken nto consderaton are the key. You should follow the
followng procedures:
• Remove the refrgerant.
• Decontamnate the ppelne by nert gases.
• Evacuaton.
1 Safety precautons

Moble room ar condtoner / Installaton Manual 15 / 88 EN
• Decontamnate the ppelne by nert gases agan.
• Cut or weld the ppelne.
3. The refrgerant should be returned to the approprate storage
tank. The system should be blown wth oxygen free ntrogen to
ensure safety. Ths process may need to be repeated for several
tmes. Ths operaton shall not be carred out usng compressed ar
or oxygen.
4.Through blowng process, the system s charged nto the
anaerobc ntrogen to reach the workng pressure under the
vacuum state, then the oxygen free ntrogen s emtted to the
atmosphere, and n the end, vacuumze the system. Repeat ths
process untl all refrgerants n the system s cleared. After the
fnal chargng of the anaerobc ntrogen, dscharge the gas nto
the atmosphere pressure, and then the system can be welded.
Ths operaton s necessary for weldng the ppelne.
Procedures of chargng refrgerants
As a supplement to the general procedure, the followng
requrements need to be added:
- Make sure that there s no contamnaton among dfferent
refrgerants when usng a refrgerant chargng devce. The
ppelne for chargng refrgerants should be as short as possble to
reduce the resdual of refrgerants n t.
- Storage tanks should reman vertcally up.
- Make sure the groundng solutons are already taken before the
refrgeraton system s charged wth refrgerants.
1 Safety precautons

16 / 88 EN Moble room ar condtoner / Installaton Manual
- After fnshng the chargng (or when t s not yet fnshed), label
the mark on the system.
- Be careful not to overcharge refrgerants.
Scrap and recovery
Scrap:
Before ths procedure, the techncal personnel shall be thoroughly
famlar wth the equpment and all ts features, and make a
recommended practce for refrgerant safe recovery. For recyclng
the refrgerant, shall analyze the refrgerant and ol samples before
operaton. Ensure the requred power before the test.
1. Be famlar wth the equpment and operaton.
2. Dscornect power supply.
3. Before carryng out ths process, you have to make sure:
• lf necessary. mechancal equpment operaton should facltate
the operaton of the refrgerant tank.
• All personal protectve equpment s effectve and can be used
correctly.
• The whole recovery process should be carred out under the
gudance of qualfed personnel.
• The recoverng of equpment and storage tank should comply
wth the relevant natonal standards.
4.If possble. the refrgeratng system should be vacuumzed.
5. If the vacuum state can’t be reached, you should extract the
refrgerant n each part of the system from many places.
1 Safety precautons

Moble room ar condtoner / Installaton Manual 17 / 88 EN
6.Before the start of the recovery, you should ensure that the
capacty of the storage tank s suffcent.
7. Start and operate the recovery equpment accordng to the
manufacturer’s nstructons.
8.Don’t fll the tank to ts full capacty (the lqud njecton volume
does not exceed 80% of the tank volume).
9.Even the duraton s short, t must not exceed the maxmum
workng pressure of the tank.
10.After the completon of the tank fllng and the end of the
operaton process, you should make sure that the tanks and
equpment should be removed quckly and all closng valves n
the equpment are closed.
11. The recovered refrgerants are not allowed to be njected nto
another system before beng purfed and tested.
C
Note: The dentfcaton should be made after the
applance s scrapped and refrgerants are evacuated. The
dentfcaton should contan the date and endorsement.
Make sure the dentfcaton on the applance can reflect
the flammable refrgerants contaned n ths applance.
Recovery:
1. The clearance of refrgerants n the system s requred when
reparng or scrappng the applance. It s recommended to
completely remove the refrgerant.
2. Only a specal refrgerant tank can be used when loadng the
refrgerant nto the storage tank. Make sure the capacty of the
1 Safety precautons

18 / 88 EN Moble room ar condtoner / Installaton Manual
tank s approprate to the refrgerant njecton quantty n the
entre system. All tanks ntended to be used for the recovery
of refrgerants should have a refrgerant dentfcaton (.e.
refrgerant recovery tank). Storage tanks should be equpped wth
pressure relef valves and globe valves and they should be n a
good condton. If possble, empty tanks should be evacuated and
mantaned at room temperature before use.
3. The recovery equpment should be kept n a good workng
condton and equpped wth equpment operatng nstructons for
easy access. The equpment should be sutable for the recovery of
R290 refrgerants. Besdes, there should be a qualfed weghtng
apparatus whch can be normally used. The hose should be lnked
wth detachable connecton jont of zero leakage rate and be kept
n a good condton.
Before usng the recovery equpment, check f t s n a good
condton and f t gets perfect mantenance. Check f all electrcal
components are sealed to prevent the leakage of the refrgerant
and the fre caused by t. If you have any queston, please consult
the manufacturer.
4.The recovered refrgerant shall be loaded n the approprate
storage tanks, attached wth a transportng nstructon, and
returned to the refrgerant manufacturer. Don’t mx refrgerant n
recovery equpment, especally a storage tank.
5. The space loadng R290 refrgeraton can’t be enclosed n the
process of transportaton. Take ant electrostatc measures f
necessary n transportaton. In the process of transport, loadng
1 Safety precautons

Moble room ar condtoner / Installaton Manual 19 / 88 EN
and unloadng, necessary protectve measures must be taken to
protect the ar condtoner to ensure that the ar condtoner s not
damaged.
6.When removng the compressor or clearng the compressor ol,
make sure the compressor s pumped to an approprate level
to ensure that there s no resdual R290 refrgerants n the
lubrcatng ol. The vacuum pumpng should be carred out before
the compressor s returned to the suppler. Ensure the safety
when dschargng ol from the system.
Warning
Falure to follow the below precauton could result n electrcal
shock, fre or personal njury.
• The plug must be plugged nto an outlet that s properly nstalled
and grounded.
• Do not use an extenson cord or plug adaptor wth ths unt.
• Don’t apply the cold ar to the body for a long tme. It wll
deterorate your physcal condtons and cause health problems.
• Don’t block ar nlet or ar outlet, otherwse, the coolng/heatng
capacty wll be weakened, even cause system stop operatng.
• Close the wndows and doors, otherwse, the coolng/heatng
capacty wll be weakened.
• If the ar flter s very drty, the coolng/heatng capacty wll be
weakened. Please clean the ar flter regularly.
1 Safety precautons

20 / 88 EN Moble room ar condtoner / Installaton Manual
WEEE Warning
Meanng of crossed out wheeled dustbn: Do not dspose of
electrcal applances as unsorted muncpal waste, use separate
collecton facltes.
Contact you local government for nformaton regardng the
collecton systems avalable. If electrcal applances are dsposed
of n landflls or dumps, hazardous substances can leak nto the
groundwater and get nto the food chan, damagng your health
and well-beng.When replacng old applances wth new ones,
the retaler s legally oblgated to take back your old applance for
dsposals at least free of charge.
1 Safety precautons