Beko SGA8328B User manual

SGA8328B
EN
01M-8816563200-1021-05
User Manual
Steam Generator

2 / EN Steam Generator / User Manual
CONTENTS
ENGLISH 8-19

1 2 3
4
5
7 68
9
10
11

4
Dry
Ironing
Steam
Ironing
EN FIRST USE TURBO MODE DRY IRONING STEAM IRONING
EN AUTOMATIC SHUTDOWN CLEANING AND CARE SELF-CLEAN MOVING

5
beep!
or
click!
1
2
3 sec.
3 sec.
10 min.
On
The “ ” out when the,
iron is ready.
1 2 3
4 5 6
7 8 9
10
11
12

6
OnOff
Fabric
Type
Temperature
Setting
Steam
Setting
Synthetic
Silk
Cotton
Linen - Jean
All fabrics
Max
Smart Smart
Continuous press “continuous steam”
One press “shock steam”
Continuous
steam
Vertical ironing
Shock
steam
or
10 min.
11 12
13
13 14 15
16 17 18
19 20 21
Dry
Ironing
Steam
Ironing

7
350 ml
Off
Off
Wait for 1 Hours
Wait for
2 Hours
350 ml
22 23 24
27 5 27
25 26
28 29 30
31 32 33

Please read this manual first!
Dear Customer,
Thank you for preferring this Beko product. We hope that you get the best results from your product
which has been manufactured with high quality and state-of-the-art technology. Therefore, please read
this user manual and all other accompanying documents carefully before using the product and keep
it as a reference for future use. If you handover the product to someone else, give the user manual as
well. Follow all warnings and information in the user manual.
Meanings of the symbols
Following symbols are used in the various sections of this manual:
CImportant information and useful hints
about usage.
AWARNING: Warnings against danger-
ous situations concerning the security
of life and property.
WARNING: Warning for hot surfaces.
WARNING: Risk or burning and scald-
ing due to steam.
BWARNING: Warning for electric shock.
This product has been manufactured in environmental friendly modern plants without giving any harm to the nature.

Steam Generator / User Manual 9 / EN
Control and parts
1. Control panel
2. Control button
3. Steam trigger
4. On/off button
5. Lime removal cover
6. Steam station
7. Cord storage compartment
8. Removable water tank
9. Water refill lid
10. Transport lock
11. Soleplate
Technical data
Power supply : 220-240V~ 50-60Hz
Power : 2350-2800W
Pump pressure : 7. 2 bar
Continuous steam amount : 130 g/min (in the
max turbo mode)
Shock steam : 450 g/min
Technical and design modification rights are re-
served.
Control panel Symbols Descriptions
Temperature settings
Steam level
Turbo mode
Smart mode
Calc removal is needed
Water reservoir is empty
Iron is getting ready
The values which are declared in the markings affixed on your appliance or the other printed documents supplied with it represent
the values which were obtained in the laboratories pursuant to the pertinent standards. These values may vary according to the
usage of the appliance and ambient conditions.

10 / EN Steam Generator / User Manual
This section contains safety in-
structions that will help protect
from risk of personal injury or
material damage.
Failure to follow these instructions
invalidates the granted warranty.
1.1 General safety
•This appliance complies with the
international safety standards.
•This appliance is intended to be
used in household and similar
applications such as:
– Staff kitchen areas in shops,
offices and other working en-
vironments;
– Farm houses
– By clients in hotels, and other
residential type environ-
ments;
– Bed and Breakfast type envi-
ronments.
It is not fit for industrial use.
•This appliance can be used the
children who are at the age of 8
and above and by people who
have limited physical, sensory
or mental capacity or who do
not have knowledge and expe-
rience, provided that they are
supervised or they understand
the instructions with regard to
safe use of the product and po-
tential dangers. Children should
not play with the appliance.
Cleaning and user maintenance
procedures should not be per-
formed by children unless they
are supervised by an older per-
son.
•Do not leave the appliance un-
attended while it is plugged in.
•Unplug the appliance before
filling the water reservoir with
water.
•Do not open the water refill hole
during usage.
•Operate and store the appliance
on a stable surface.
•When the appliance is placed on
its base plate, ensure that the sur-
face beneath the plate is level.
1 Important safety and environmental
instructions

Steam Generator / User Manual 11 / EN
•Always rest your iron on the
base.
•If the appliance is dropped or
leaks water or has other failures,
contact the authorised service.
Do not use the appliance until it
is repaired.
•When the appliance is in use or
left to cool down, keep the ap-
pliance and power cable out of
reach of children under 8 years
old.
•The appliance is not suitable for
outdoor use.
•Only use the original parts or
parts recommended by the
manufacturer.
•Use the appliance only when it
is connected to the steam iron
station.
•Do not dismantle the appliance.
•Your mains power supply should
comply with the information
supplied on the rating plate of
the appliance.
•The mains supply of the appli-
ance should be secured with a
16 A fuse minimum.
•Use the appliance with a
grounded outlet.
•Do not use the appliance with
an extension cable.
•Do not pull the power cable
when unplugging the appliance.
•If the power cable is damaged,
it should be repaired or replaced
by the dealer, service center, or
a specialised and authorised
service with similar qualifica-
tions.
•Unplug the appliance before
cleaning.
•Do not wrap the cable around
the appliance.
•Do not touch the appliance or
its plug with damp or wet hands
when the appliance is plugged
in.
•The soleplate and the steam
station surface may get over-
heated. Contact with hot sur-
faces may cause burns.
•Do not use the appliance in or
near the areas where combus-
tible or inflammable places and
materials exist.
1 Important safety and environmental
instructions

12 / EN Steam Generator / User Manual
•If you keep the packaging mate-
rials, store them out of the reach
of children.
•For detailed information on
cleaning the appliance, please
refer to the section Cleaning
and maintenance.
•Make sure that the appliance
is cold before opening the lime
removal cover. After using the
appliance, you should wait for
about 2 hours before opening
the cover of the appliance.
1.2 Compliance with WEEE
Directive and Disposing of the
Waste Product
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equip-
ment (WEEE).
This symbol indicates that this product
shall not be disposed with other house-
hold wastes at the end of its service
life. Used device must be returned to
offical collection point for recycling of
electrical and electronic devices. To find these col-
lection systems please contact to your local au-
thorities or retailer where the product was pu-
chased. Each household performs important role
in recovering and recycling of old appliance.
Appropriate disposal of used appliance helps pre-
vent potential negative consequences for the envi-
ronment and human health.
1 Important safety and environmental
instructions
1.3 Compliance with RoHS
Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
1.4 Package information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not dispose of the
packaging materials together with the domestic or
other wastes. Take them to the packaging material
collection points designated by the local authori-
ties.
1.5 Plug Wiring
The moulded plug on this appliance incorporates
a 13 A fuse. Should the fuse need to be replaced
an ASTA approved BS1362 fuse of the same rating
must be used. Do not forget to refit the fuse cover.
In the event of losing the fuse cover, the plug must
not to be used until a replacement fuse cover has
been fitted. Colour of the replacement fuse cover
must be the same colour as that visible on the pin
face of the plug Fuse covers are availabe from any
good electrical store.
• Fiting a different plug
•As the colours of the wires in the mains lead
of this appliance may not correspond with the
coloured markings identifying the terminals on
your plug, proceed as follows:
•Brown cable = L (Live)
•Blue cable = N (Neutral)
•Green/yellow cable must be connected to
ground (E) line

Steam Generator / User Manual 13 / EN
1 Important safety and environmental
instructions
•With the alternative plugs a 13 A fuse must be
fitted either in the plug or adaptore or in the
main fuse box. If in doubt contact a qualified
electrician.

14 / EN Steam Generator / User Manual
2.1 Intended use
This appliance is intended only for household use
and ironing; it is not suitable for professional use.
2.2 Initial use
C
•Before the first operation, add
water to the water reservoir (8)
and steam for 10-15 minutes
before ironing to remove any pro-
duction residues.
•A light odour may arise during the
initial use. This condition will re-
turn to normal after several uses.
2.3 Ironing tips
•The appliance gets heated in a short time; iron
fabrics such as synthetic and silk at first by
using low temperature settings.
•Iron fabrics that may have a luster (silk etc.) by
turning them inside out or by using the appli-
ance in “SMART” mode.
•Use very little pressure when ironing fabrics
such as velvet and iron them towards one single
direction.
•Steam usage may cause stains on coloured silk
fabrics. Do not use steam.
•100% pure woolen clothes can be ironed by
using steam.
•Ironing woolen clothes may cause a luster. Iron
by turning them inside out.
AWARNING: Do not allow the iron
to contact with metal parts such as
zippers and rivets. This may damage
the soleplate of the iron.
2 Operation
2.4 Filling the water reservoir
A
WARNING
•When filling the water reservoir
with water without removing it
from the steam station, ensure
that the appliance is unplugged.
•Do not soak the steam station (6)
in water or other liquids. Never put
vinegar, descaling agent, laundry
starch, perfume or other auxiliary
products that help ironing into the
appliance.
C
•When you press the steam trigger
(3) while the water reservoir is
empty, the water reservoir empty
symbol “ ” is illuminated on the
display within approx. 20 - 30
seconds.
•Your appliance is suitable to be
used with tap water. If your tap
water is excessively hard, we rec-
ommend you to use a mixture of
tap water and potable water.
2.5 Temperature setting
Fabric
Type
Temperature
Setting
Steam
Setting
Synthetic • Without steam
Silk •• With Steam
Cotton ••• With Steam
Linen -
Jean Max With Steam
C
“SMART“ mode of your appliance
is suitable for all types of fabrics that
can be ironed. You can do steam
ironing by using the steam trigger
(3) in this mode.

Steam Generator / User Manual 15 / EN
A
WARNING
•You can do steam ironing at all
temperature levels except for “•”
setting. Press the steam trigger (3)
for steam ironing.
•Take the ironing instructions spec-
ified on the label of the fabric into
consideration for ironing.
2.6 Dry ironing
Your appliance will not raise steam as long as you
do not press the steam trigger (3).
In order to use dry ironing, do not press the steam
trigger (3).
2.7 Steam ironing
C
•Please note that the steam button
operates in intervals of 1 minute.
After 1 minute of operation the
steam function stops. To start
again hold the steam button.
•Operation of the pump may make
some noise during the water
drawing process; this is normal.
•The appliance starts in Smart
mode in the initial use. This level
offers safe temperature and
steam amount for all the fabrics
that can be ironed.
•Except for the “SMART” mode,
you may adjust other temperature
levels by using the control button
(2).
A
WARNING
•Your selection shall comply with
the type of the cloth to be ironed.
•While the iron is being prepared
symbol “ ” in the control panel
(1) is flashing, this means that
the base temperature is being
prepared to reach the selected
setting. When the iron is being
prepared symbol “ ” in the con-
trol panel turns off completely, the
base temperature has reached the
selected temperature level.
C
•You can do steam ironing by using
the steam trigger (3) at all temper-
ature levels except for “•”.
•When the appliance is ready for
ironing, move the iron horizon-
tally on the cloth to be ironed and
press the steam trigger (3). Your
iron will raise steam from its sole-
plate (11) as long as you hold the
steam trigger pressed.
2.8 Turbo mod
C
•Use the turbo steam feature for
more steam and for quick ironing
on thicker clothes.
•After running for 12 minutes at
Turbo level, the product will auto-
matically switch to the Max. level.
•To exit from the Turbo mode, press
the control button (2) for 3 sec-
onds.
2 Operation

16 / EN Steam Generator / User Manual
2.9 Vertical steam
C
•You can iron your curtains and
hanged garments thanks to the
vertical steam feature. Keep the
appliance 15-30 cm away from
the garment and curtains.
•You can do steam ironing by using
the steam trigger (3) at all temper-
ature levels except for “•”.
•You may also use the Turbo fea-
ture.
WARNING: Never direct the steam
to people or pets.
2.10 Automatic Shutdown
(Auto-Off)
C
•If you do not move the appliance
or press any of its buttons for 10
minutes, it will shut down auto-
matically.
•It may take time for the soleplate
(11) to reach the previous temper-
ature level.
A
WARNING: In the automatic shut-
down mode, the product will not
shut down if you press the on/off
button (4) until you unplug it. The
on/off button will start to flash in ten
minutes and the product will switch
to stand-by.
2 Operation

Steam Generator / User Manual 17 / EN
3 Cleaning and care
3.1 Cleaning
A
WARNING
•Do not soak the steam station (6)
in water or other liquids. Never put
vinegar, descaling agent, laundry
starch, perfume or other auxiliary
products that help ironing into the
appliance.
•Do not use gasoline, solvent and
abrasive cleaning agents or hard
brush to clean the appliance.
•Do not use abrasive cleaning
agents to clean the soleplate (11).
BWARNING: Do not wash your appli-
ance under running water or do not
soak it in water or other liquids.
3.2 Lime cleaning (Self-Clean)
A
WARNING
•Do not open the scale removal
cover (5) while your appliance is
hot.
•Before performing descaling op-
eration on your appliance, allow it
to cool down for at least 2 hours.
3.3 Storage
•If you do not intend to use the appliance for a
long time, store it carefully.
•Unplug the appliance and wait for it to cool com-
pletely before storing it.
•Discharge the water in the water reservoir (8).
•Lock the handling lock (10) of the appliance.
•Store it in a cool and dry place.
•Keep the appliance out of the reach of children.
3.4 Moving and transportation
•Carry the appliance in its original packaging
during moving and transportation. The packag-
ing of the appliance protects it against physical
damages.
•Do not place heavy loads on the appliance or
the packaging. The appliance may be damaged.
•Dropping the appliance may render it non-oper-
ational or cause permanent damage.
The values which are declared in the markings
affixed on your product or the other printed docu-
ments supplied with it represent the values which
have been obtained in the laboratories pursuant
to the pertinent standards. These values may vary
according to the usage of the appliance and am-
bient conditions.
For commissioning, general use and clean-
ing, please observe the instructions on pag-
es 5 - 6 and 7 of this operating manual.

18 / EN Steam Generator / User Manual
4 Troubleshooting
Problem Possible cause Solution
The base does not heat (11)
although the appliance is
plugged.
There may be a problem with
the connection.
Check the plug and the power cord of
the appliance
Press the on/off button (4).
Contact the authorized service if the
appliance does not operate although
the appliance is plugged and you
have pressed the on/off button.
The appliance does not pro-
duce steam.
The amount of water in the
water reservoir may be inad-
equate.
Fill the water up to the MAX line in the
water reservoir.
Check if the water reservoir (8) is in-
stalled in its housing.
The appliance does not provide steam
if the temperature is set to “•” posi-
tion. Bring the temperature setting to
“••”, “•••” or “MAX” position.
Water droplets drip on the
cloth.
Water may come out when
you press the steam trig-
ger (3) before the appliance
reaches the set temperature.
When the iron is being prepared
symbol “ ” in the control panel (1)
turns off completely, your appliance is
ready for ironing.
Sediments and residues fall
of from the base (11) while
ironing.
Such sediments may occur
if the water you use in your
appliance is too calcareous.
Fill the water reservoir of the appli-
ance by mixing the tap water and
drinking water for your next ironing
operations.
There are stains on the base
(11).
Wet clothes are ironed / scale
stains have occurred on the
base (11).
Wipe the sediments and residues with
a lightly dampened cloth after the ap-
pliance is cooled down adequately.
The on/off button (4) of the
appliance flashes.
The appliance may have
switched to auto off mode.
Press the on/off button (4).
The “ ” symbol flashes
on the control panel (1).
The time for descaling has
come.
Perform the descaling operation.

12 months breakdown and repair guarantee
Product Guarantee
Guarantor: Beko plc, 1 Greenhill Crescent, Watford, Hertfordshire. WD18 8UF
The guarantee does not in any way diminish your statutory or legal rights.
Your appliance hasthe benefit of our manufacturer’s guarantee which covers the product for 12 months
from the date of original purchase.
This gives you reassurance thatif within that time, your appliance is proven to be defective because of
either workmanship or materials, we will at our discretion either repair or replace your appliance.
The appliance must be correctly installed, located and operated in accordance with the instructions
contained in the user manual.!The guarantor disclaims anyliabilityfor accidental or consequential damage.
The Guarantee is subject tothe following conditions:
Documentary proof of the original purchase date is provided.
The appliance has been installed and operated correctly and in accordance with our operating and maintenance
instructions.
The appliance is used only on the electricity supply on the rating plate.
The appliance has only been used for normal domestic purposes.
The appliance has not been altered, serviced, dismantled or otherwise interfered with by any person.
The appliance is used in the United Kingdom or Republic of Ireland.
Any parts removed during repair work or any product that has been replaced becomes our property.
The guarantee is not transferrable if the product is resold.
The Guarantee does not cover:
Transit, installation or delivery damage.
Accidental damage.
Misuse or abuse.
Replacement of any consumable item or accessories. These include but are not limited to: plugs, cables, light bulbs,
knobs, filters and flaps.
Repairs or replacements required as a result of unauthorised repairs or inexpert installation that failsto meet the
requirements contained inthe user guide or instruction book.
Repairs to products used in commercial or non-residential household premises.
How to obtain after sales service, help or general advice
Please keep your purchase receipt or other proof of purchase in a safe place as you will need to
show us this document if your product requires attention within the guarantee period.
Please also record your product details below, which will allow you to access our services more quickly and
help us identify your product. The model numberis printed on the front of the user guide and the serial and
model number is shown on your products rating plate.
Model number
Serial number
Purchased from
Date of purchase
Please call our UK based Customer Service department if you need help or advice from us:
United Kingdom and Northern Ireland: 0333 207 9710
Republic of Ireland: 01 862 3411
You can also contact us through our website: www.beko.co.uk

Arçelk A.Ş.
Karaağaç Caddes No: 2-6, 34445,
Sütlüce, İstanbul, Türkye
www.beko.com