Beko BKK 2141 User manual

www.beko.com
BKK 2141
Electronic Steam Iron
User Manual

Read this manual prior to initial operation of the product!
Dear Customer,
We hope that your product, which has been manufactured in
modern facilities and passed through a strict quality control
procedure, will give you very good results.
We advise you to read through this manual carefully before
using your product and keep it for future reference.
The User Manual will help you use your machine in a
fast and safe way.
• Read the User Manual before installing and starting your
product.
• In particular, follow the instructions related to safety.
• Keep this User Manual within easy reach for future reference.
• Also read all additional documents supplied with this
product.
Remember that this User Manual is also applicable for several
other models. Differences between models will be identified in
the manual.
This product has been produced in environmentally friendly, modern facilities

1
1 Safety Warnings 2-3
2 Technical Specifications of Appliance 4-5
3 Operating the Appliance 6-13
4 Cleaning and Care 13
CONTENTS

2
Important
For safety purpose you should
read the instructions carefully
before using the appliance for
the first time. Save the instructions
for future reference.
The appliance is designed for
domestic use and may only be
operated in accordance with
these instructions for use.
The appliance generates high
temperature steam. Always
handle with care and warn
other
users of potential danger.
Do’s
1. Check the mains voltage stated
on the rating plate corresponds to
the local electricity supply.
2. Unwind and straighten the
power cord and supply cord
before use.
3. Place the appliance on a firm
and steady surface.
4. The iron must be used and
rested on a stable surface
5. Avoid power cord or supply
cord touches the soleplate.
6. The plug of the supply cord
must be removed from the
socket-outlet before the water
reservoir is filled with water
7. Keep electrical appliances out
of reach from Children or infirm
persons. Do not let them use the
appliances without supervision
8. When placing the iron on its
stand, ensure that the surface on
which the stand is placed is
stable.
9. If the power cord or supply
cord is damaged, the manufac-
turer or its service agent or
similarly qualified person must re-
place it in order to avoid a hazard
10. Empty the water tank after
use.
11. This appliance is not intended
for use by persons (including
children) with reduced physic
al, sensory or mental capabilities,
or lack of experience and knowl-
edge, unless they have b een
given supervision or instruction
concerning use of the appliance
by a person responsib le for their
safety
12. Children should be supervised
to ensure that they do not play
with the appliance.
Do Not’s
1. Do not allow children touch the
appliance when ironing.
2. Do not leave the appliance
unattended when it is connected
to a mains supply outlet.
3. Do not use an extension power
cord set unless competent author-
ity has approved it.
4. Do not add perfumed, vinegar
or other chemical liquids into the
water tank; they can damage the
appliance seriously.
5. Do not immerse the appliance
in water or any other liquid.
6. Do not use the appliance
when it is damaged or performs
abnormally.
Safety Warnings
1

3
7. The iron is not to be used if it
has been dropped, if there are
visible signs of damage or if it is
leaking
8. Do not touch the iron rest dur-
ing or just after ironing. It is hot!
9. Do not roll the power cord or
supply cord around the iron unit
or base console for storage until it
has cooled down completely.
10. Do not attempt to open the
cabinet or dismantle any parts
from the appliance, there is no
serviceable part inside.

4
Markings on the appliance or the values stated in print documents supplied with the appliance are
values obtained under laboratory conditions as per relevant standards. These values may vary accord-
ing to the usage of the appliance and ambient conditions.
Technical Specifications of Appliance
2
Get to Know Your Iron
1- Soft Grip Handle
2- Burst of Steam Button
3- Water Spray Button
4- LCD
5- LCD Control Button “Tempera
ture down” & Language selec
tion button
6- LCD Control Button “Tempera
ture up”/ON OFF button
7- Steam Control Button Water
Saving Function Hold –
ON /OFF
8- Water Inlet Cover
9- Spray Nozzle
10- Self-Cleaning Button
11- Back Heel
12- Power Cable
13- Water Refill Beaker
Valtage: 220-240V ~~50/60Hz
Power: 2200-2400W
Isolation Class: I
Net Weight: 1.3 kg
13
12
9
11
10
8
7
6
5
4
321

5
LCD Description
1- Steam On/Off indicator
2- Auto shut-off indicator
3- Water saving mode indicator
4- Temperature setting indicator
5- Self-clean indicator
6- Fabric type indicator
Hints for Ironing
1. Sort out the articles to be ironed
according to the type of fabric.
This will minimize the frequency of
temperature adjustment for differ-
ent garments.
2. Test ironing a small area on the
backside or inside the garment if
you are unsure about the type of
fabric. Start with a low tempera-
ture and increase gradually.
3. Wait for about three minutes
before ironing heat sensitive
fabrics. Temperature adjustment
needs certain time to reach the
required level no matter it is higher
or lower.
4. Delicate fabrics such as silk,
wool, velour, etc. are best ironed
with an ironing cloth to prevent
shine marks.
5. You may need a few times of
press to activate the spray, burst
and vertically burst function.

6
Read The Garment Labels And Follow The Manufacturer’s Ironing
Instructions That Are Often Shown By Symbols Similar To The
Follows:
3Using the Appliance
How To Fill Water
1. Press and hold the “Tempera-
ture up / ON OFF button” 3 sec
the LCD display will off with a
beep sound.
2. Disconnect the iron from mains
supply outlet.
3. Release the Water Inlet Cover.
4. Fill water through the water inlet
hole.
5. Fill up to the ‘Max’ level marked
on the side of water tank.
Note:
Do not use chemical mixed water
or any other liquids

7
How To Set Temperature
1. Connect the iron to a suitable
mains supply outlet.
2. “Beep” sound would be heard
and the LCD would display all
logos for a Second then turn off.
3. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. Press “temperature up” button
to raise the temperature set-
ting from Acryl to Linen; press
once the temperature setting will
change with a “beep” sound,
press “temperature down” button
for the reverse order setting.
5. The “Fabric type” will flash to
indicate that the iron is heating up
or cooling down.
6. When the iron attained the ap-
propriate temperature, the” Fabric
type” will stop blinking with a beep
sound.
7. For the better performance, the
steam only available for the high
temperature range (Cotton, Jeans
& Linen).
8. Press once the steam button for
the continuous steam ironing, the
steam icon ( ) will display on the
LCD with a beep sound.
9. Double continuous beep sound
would be heard and LCD would
display the steam off indicator
( ), if press the steam button
for the lower and medium tem-
perature settings (Acryl, Nylon,
Silk, Poly, Blend & Wool).
10. The iron is ready for use.
First Time Ironing
1. Remove any protective films or
stickers from the soleplate and the
cabinet if any.
2. Unwind and straighten the
power cord.
3. Fill the iron as described in
“How To Fill Water”.
4. Connect the iron to a suitable
mains supply outlet.
5. “Beep” sound would be heard
and the LCD would display all
logos for a Second then turn off.
6. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
7. Set the MAX temperature, to
see “How To Set Temperature”.
8. Press once the steam button for
the continuous steam ironing, the
steam icon ( ) will display on the
LCD with a beep sound.
9. The iron is ready for use.
10. Begin first time ironing with an
old towel.
11. Press and hold the “Tempera-
ture up / ON OFF button” 3sec the
LCD display will off with a beep
sound.
12. Disconnect the iron from
mains supply outlet.

8
13. When the iron gets cool
completely, store it vertically in a
safe place.
Spraying
1. This function can be used any
time and is not affect any setting.
2. Fill the water tank as described
in “How to Fill Water”.
3. Aim the nozzle to the garment.
4. Press the Spray Button.
Note: It may be necessary to
press the spray button a few times
to start this function.
Dry Ironing
1. Connect the iron to a suitable
mains supply outlet.
2. “Beep” sound would be heard
and the LCD would display all
logos for a Second then turn off.
3. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. To select the temperature set-
ting according to the recommen-
dation of the garment label, See
“How To Set Temperature”.
5. The iron is now ready to use.
6. Press and hold the “Tempera-
ture up / ON OFF button” 3 sec
the LCD display will off with a
beep sound.
7. Disconnect the iron from mains
supply outlet.
8. When the iron gets cool com-
pletely, store it vertically in a safe
place.
How To Select The Water
Saving Mode
1. Connect the iron to a suitable
mains supply outlet
2. “Beep” sound would be heard
and the LCD would display all
logos for a Second then turn off.
3. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. Press and hold the steam
control button 3sec, the icon
will appear on the LCD. Its
mean your iron in water saving
mode.
5. For cancellation of the water
saving mode, press and hold the
steam control button 3sec, the
icon will disappear from the
LCD
Note:
1. The steam production will stop
in the water saving mode, when
the appliance immobile in the iron-
ing position for 5sec.
2. Simply move the iron, the steam
production will start again.

9
Steam Ironing
1. Fill the iron as described in the
section of “How To Fill Water”.
2. Connect the iron to a suitable
mains supply outlet
3. “Beep” sound would be heard
and the LCD would display all
logos for a Second then turn off.
6. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. To select the higher tem-
perature setting (Cotton, Jeans &
Linen), See “How To Set Tempera-
ture”.
5. Press the Steam Control Button
once the icon will display on
the LCD and steam will come out.
6. The iron is now ready to use.
7. Press and hold the “Tempera-
ture up / ON OFF button” 3 sec
the LCD display will off with a
beep sound.
8. Disconnect the iron from mains
supply outlet.
9. When the iron gets cool com-
pletely, store it vertically in a safe
place.
Note:
- The steam function only working
at the higher temperature setting
(Cotton, Jeans & Linen).
- Double continuous beep sound
would be heard and LCD would
display the steam off indicator ( ),
if press the steam button for the
lower and medium temperature
settings (Acryl, Nylon, Silk, Poly,
Blend & Wool).
Burst Of Steam
This function provides extra
amount of steam to remove stub-
born wrinkles.
1. Fill the iron as described in the
section of “How To Fill Water”.
2. Connect the iron to a suitable
mains supply outlet
3. “Beep” sound would be heard
and the LCD would display all logo
for a Second then turn off.
7. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and the
steam indicator ( ).
4. To select the temperature set-
ting according to the recommen-
dation of the garment label, See
“How To Set Temperature”.
5. The iron is now ready to use.
6. Press the Burst Of Steam But-
ton.
7. Steam will shoot from the holes
of the soleplate into the fabric
being ironed and removing the
wrinkles.
8. For stubborn wrinkles, wait a
few seconds before pressing the
Burst of Steam Button again. Most
wrinkles can be removed within
three presses.

10
9. Press and hold the “Tempera-
ture up / ON OFF button” 3 sec
the LCD display will off with a
beep sound.
10. Disconnect the iron from
mains supply outlet.
11. When the iron gets cool
completely, store it vertically in a
safe place.
Note:
- Only use the higher temperature
setting (Cotton, Jeans & Linen) for
the better result.
- It may be necessary to press the
burst of steam button a few times
to start this function. For optimum
steam quality, do not operate the
Burst of Steam more than three
times in succession.
Burst Of Steam In Vertical
Position
Warning:
Do not apply steam on any
clothes or fabrics that are
being worn by human or pets.
Temperature of steam is very
high.
This function provides extra
amount of steam to remove
wrinkles on delicate garments in
hanging position, hanging curtains,
or other hanging fabrics.
1. Fill the iron as described in
“How To Fill Water”.
2. Connect the iron to a suitable
mains supply outlet
3. “Beep” sound would be heard
and the LCD would display all logo
for a Second then turn off.
4. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL)
temperature indicators ( ) and the
steam indicator ( ).
5. To select the temperature set-
ting according to the recommen-
dation of the garment label, See
“How To Set Temperature”.
6. The iron is now ready to use.
7. Hold the iron between 15 and
30 centimeters away from the
garment.
8. Press the Burst of Steam But-
ton.
9. Steam will penetrate into the
garment removing the wrinkles.
10. For Stubborn wrinkles, wait a
few seconds before pressing the
Burst of Steam Button again. Most
wrinkles can be removed within
three presses.
11. Press and hold the “Tem-
perature up / ON OFF button” 3
sec the LCD display will off with a
beep sound
12. Disconnect the iron from
mains supply outlet.
13. When the iron gets cool
completely, store it vertically in a
safe place.

11
Note:
− Only use the higher temperature
setting (Cotton, Jeans & Linen) for
the better result.
− It may be necessary to press the
burst of steam button a few times
to start this function. For optimum
steam quality, do not operate the
Burst Of Steam more than three
times in succession.
Build-in Anti-scale System
The build-in anti-scale cartridge is
designed to reduce the build-up
of lime scale that occurs during
steam ironing. This will prolong the
working life of your iron.
Note: The anti-scale cartridge will
not completely stop the natural
process of lime scale build-up.
Self-Cleaning
This function removes the scales
and minerals built up in the Steam
Chamber.
After steaming function has used
over 5 hours, the soleplate need to
self-clean and would be
flashed on the LCD.
1. Fill the iron as described in
“How To Fill Water”; fill the water
tank up to half.
2. Place the iron on a surface in
upright standing position.
3. Connect the iron to a suitable
mains supply outlet
4. “Beep” sound would be heard
and the LCD would display all logo
for a Second then turn off.
5. Press “Temperature up / ON
OFF” button once, the LCD would
display the fabric type (ACRYL),
temperature indicators ( ) and
the steam indicator ( ).
6. Select the ‘Max’ temperature
setting, See “How To Set Tem-
perature”
7. Depress and hold the “tempera-
ture up” button 3sec for turn off
the iron.
8. Disconnect the iron from mains
supply outlet.
9. Hold the iron horizontally over
a sink.
10. Press the Self-Cleaning But-
ton.
11. Steam and boiling hot water
will drain from the holes on the
soleplate washing away the scales
and minerals that have built up
inside the steam chamber.
12. Gently move the iron back and
forth until the water tank is empty.
13. Rest your steam iron back on
its heel rest and allow to fully cool
down.
14. Wipe the soleplate with a cold
damp cloth.
15. When the iron gets cool
completely, store it vertically in a
safe place.
Caution: Keep skin/body away
from the hot water.

12
Anti-Drip
1. Anti-drip system, which is de-
signed to prevent water escaping
from the soleplate when the iron is
too cold automatically.
2. During use, the anti drip system
may emit a loud clicking sound,
particularly during heat-up or
whilst cooling down. This is per-
fectly normal and indicates that the
system is functioning correctly.
Auto Shut-Off
The Auto shut-off feature will oper-
ate automatically when the iron is
unattended and it is connected to
a mains supply outlet.
Auto Shut-Off In Horizontal
1. The iron will switch off automati-
cally with a “Beep” around 30 Sec
if the iron is immobile in the ironing
position (horizontal).
2. Pause symbol would be flashing
on the LCD, the LCD back lights
gone off after first 5 flashes and
then the pause symbol will con-
tinue the flashing.
3. Simply moving the iron, the iron
will back on.
Auto Shut-Off In Vertical
1. The iron will switch off auto-
matically with a “Beep” around 8
minutes if the iron is left on its heel
rest position (vertically).
2. Pause symbol would be flashing
on the LCD, the LCD back lights
gone off after first 5 flashes and
then the pause symbol will con-
tinue the flashing.
3. Simply moving the iron, the iron
will back on.
Note: The iron will take about 60
seconds to reach its previous sole-
plate temperature.
Language Selection Feature
To change language settings,
press ”temperature down” button
and hold 3 seconds, “EN” would
be shown and Press temperature
down button again, language
would be changed from EN
(English) to FR (French) and FR
to DE (German) and the language
system run in a loop. For a desired
“language”, press ”temperature
up” button or leave the “language”
shown for 3 seconds, then the
language setting would be settled.
Note: Default language setting will
be English

13
Emptying and Storing
1. Disconnect the iron from the
mains supply outlet.
2. Hold the iron upside down
and gently shake it to remove the
remaining water.
3. When the iron gets cool com-
pletely, store it vertically in a safe
place.
Cleaning the Iron
1. Disconnect the iron from the
mains supply outlet.
2. Use a damped cloth or non-
scratching cleaner to remove any
deposits on the sole plate or the
cabinets.
Note:
Never use sharp or rough objects
to remove the deposits on the sole
plate. Never use any abrasive,
vinegar or descaling agents to
clean the iron.
Cleaning and Care
4
Feature
Blue color LED will emit beside
from water tank, during the
complete session of ironing. It
impresses more, during the ironing
session. This feature will not affect
the function of ironing.

Hair Dryer
User Manual
D500 ES
www.beko.com