Beko HCA62640B User manual

01M-8848063200-1121-06
01M-8848053200-1121-06
Hood
User manual
EN-ES-BS-MK-PT-RO-RU-SK-SL-SQ-SR
HCA62640B
HCA62640W

Please read this guide first!
Dear Customer,
Thank you for choosing a BEKO product. We would like you to achieve the optimal
efficiency from this high quality product which has been manufactured with state
of the art technology. Please make sure you read and understand this guide and
supplementary documentation fully before use and keep it as a reference. Include
this guide with the unit if you hand it over to someone else. Observe all warnings and
information herein and follow the instructions.
Keep in mind that this user guide may apply to several product models. The guide
clearly indicates any variations of different models.
Symbols and their meanings
These symbols are used throughout this guide:
CImportant information and recommendations re-
garding the use of the appliance.
ACAUTION: Warnings on personal injury or property
damage.
BElectric shock warning.
Risk of fire warning.
Complies with WEEE Regulations. No PCB Included.
This product has been manufactured at modern facilities respectful to the environment without
harming nature.

Cooker Hood / User Manual 3 / EN
CONTENTS
ENGLISH 04-16
ESPAÑOL 17-32
BOSANSKI 33-46
МАКЕДОНСКИ 47-65
PORTUGUÊS 66-81
ROMÂNĂ 82-97
РУССКИЙ 98-119
SLOVENSKÝ 120-133
SLOVENŠČINA 134-147
SHQIPTARE 148-161
СРПСКИ 162-180

4 / EN Cooker Hood / User Manual
1.1 General Safety
Important Safety Instructions
Read Carefully And Keep For
Future Reference This section
contains safety instructions that
will help protect from risk of fire,
electric shock, exposure to leak
microwave energy, personal in-
jury or property damage. Failure
to follow these instructions shall
void any warranty.
•Beko products comply with the
applicable safety standards;
therefore, in case of any dam-
age on the appliance or power
cable, it should be repaired or
replaced by the dealer, service
center or a specialist and au-
thorized service alike to avoid
any danger. Faulty or unqualified
repair work may be dangerous
and cause risk to the user.
•This appliance is intended to be
used in household and similar
applications such as:
– Staff kitchen areas in shops,
offices and other working envi-
ronments;
– Farm houses
– By clients in hotels, and other
residential type environments;
– Bed and Breakfast type envi-
ronments.
•Operate the appliance for its
intended purpose only as de-
scribed in this manual.
•The manufacturer cannot be
held liable for damages result-
ing from improper installation or
misuse of the product.
•This appliance can be used by
children aged from 8 years and
above and persons with reduced
physical, sensory or mental ca-
pabilities or lack of experience
and knowledge if they have been
given supervision or instruction
concerning use of the appliance
in a safe way and understand
the hazards involved.
•Children shall not be allowed
play with the appliance. Clean-
ing and user maintenance shall
not be made by children without
supervision.
•The minimum distance between
the supporting surface for the
cooking vessels on the hob and
the lowest part of your product
must be at least 65 cm.
•If the instructions for installation
for the gas hob specify a greater
distance, this has to be taken
1 Important safety and environmental instructions

Cooker Hood / User Manual 5 / EN
into account.
•Make sure that your mains
power supply complies with the
information supplied on the rat-
ing plate of the appliance.
•Never use the appliance if the
power cable or the appliance it-
self is damaged.
•Prevent damage to the power
cable by not squeezing, bend-
ing, or rubbing it on sharp
edges. Keep the power cable
away from hot surfaces and
naked flame.
•Use the appliance with a
grounded outlet only.
WARNING: Do not connect the
appliance to the mains until the
installation is fully complete.
•Place the appliance in a way so
that the plug is always acces-
sible.
•Do not touch the lamps if they
have operated for a long time.
They can burn your hands since
they will be hot.
•Follow the regulations set out
by competent authorities on dis-
charge of the exhaust air (this
warning is not applicable for use
without chimney).
•Operate your appliance after
putting a pot, pan etc. on the
hob. Otherwise, high heat may
cause deformation in some
parts of your product.
•Turn off the hob before taking
the pot, pan etc. from it.
•Do not leave hot oil on the hob.
Pans with hot oil may cause self
combustion.
•Pay attention to your curtains
and covers since oil may catch
fire while cooking food such as
fries.
•Grease filter must be cleaned
at least monthly. Carbon filter
must be replaced at least every
3 months.
•Product shall be cleaned ac-
cordance with user manual. If
cleaning was not carried out in
accordance with user manual,
there may be fire risk.
•Do not use non-fire-resistant
filtering materials instead of the
current filter.
•Only use the original parts or
parts recommended by the
manufacturer.
•Do not operate the product with-
out the filter and do not remove
1 Important safety and environmental instructions

6 / EN Cooker Hood / User Manual
the filters while the product is
running.
•In the event of be started any
flame, de-energize your product
and cooking appliances.
•In the event of be started any
flame, cover the flame and
never use water to extinguish.
•Unplug the appliance before
each cleaning and when the
appliance is not in use.
•The negative pressure in the en-
vironment should not exceed 4
Pa (4 x 10 bar) while the hood
for electric hob and appliances
running on another type of en-
ergy but electricity operate si-
multaneously.
•In the environment where the
appliance is being used, the ex-
haust of devices running on fuel
oil or gas, such as room heater
must be absolutely isolated or
device must be hermetical type.
•When connecting the chimney,
use pipes with a diameter of
120 or 150 mm. Pipe connec-
tion must be as short as pos-
sible and have as few elbows as
possible.
Danger of choking! Keep all the
packaging materials away from
children.
CAUTION: Accessible parts may
become hot when used with
cooking appliances.
•The product outlet must not be
connected to air channels that
include other smoke.
•The ventilation in the room may
be insufficient when the hood
for electric hob is used simulta-
neously with the devices oper-
ating on gas or other fuels (this
may not apply to appliances that
only discharge the air back into
the room).
•Objects placed on the product
may fall. Do not place any ob-
jects on the product.
•Do not flambe under the your
product.
WARNING: Before installing the
Hood, remove the protective films.
•Never leave high naked flames
under the hood when it is in op-
eration
•Deep fat fryers must be contin-
uously monitored during use:
overheated oil can burst into
flames.
1 Important safety and environmental instructions

Cooker Hood / User Manual 7 / EN
1 Important safety and environmental instructions
1.2 Compliance with the WEEE
Directive and Disposing of the
Waste Product:
This product complies with EU
WEEE Directive (2012/19/EU).
This product bears a classification
symbol for waste electrical and
electronic equipment (WEEE).
This symbol indicates that
this product shall not be
disposed with other
household wastes at the
end of its service life. Used device
must be returned to offical collec-
tion point for recycling of electri-
cal and electronic devices. To find
these collection systems please
contact to your local authorities or
retailer where the product was
puchased. Each household per-
forms important role
in recovering and recycling of old
appliance. Appropriate disposal
of used appliance helps prevent
potential negative consequences
for the environment and human
health.
1.3 Compliance with RoHS
Directive
The product you have purchased
complies with EU RoHS Directive
(2011/65/EU). It does not contain
harmful and prohibited materials
specified in the Directive.
1.4 Package Information
Packaging materials of the
product are manufactured
from recyclable materials
in accordance with our National
Environment Regulations. Do not
dispose of the packaging mate-
rials together with the domestic
or other wastes. Take them to
the packaging material collection
points designated by the local au-
thorities.

8 / EN Cooker Hood / User Manual
2 General Appearance
Model HCA62640B - HCA62640W
Supply voltage 220-240V ~ 50 Hz
Lamp Power 2 x 3 W
Motor Power 210 W
Flow rate (m³/h) – 3.
Level 582
Insulation Class of Motor Class F
Insulation Class Class I
2.1 Overview
2.2 Technical Data
596
366
391
350
400
Min:750 Max:1080
395
330
24
80
213
166.5
3421.6.595.13
20
1
2
3
4
5
6
1. Inner Chimney
2. Outer Chimney
3. Body
4. Aluminum Grease Filter
(Behind Glass Cover)
5. Control Panel
6. Lighting
(Figure 2)
(Fig. 1)

Cooker Hood / User Manual 9 / EN
3 Operation of the Appliance
3.1 Controlling the Appliance
KEY FUNCTION
(A) : Light On / Off You may illuminate the cooking area by pressing
this button. Re-press the button to turn off
the lamp.
(B) : 1. Stage Button Operates the appliance on 1st speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
(C) : 2. Stage Button Operates the appliance on 2nd speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
(D) : 3. Stage Button Operates the appliance on 3rd speed. When you
press this button again to turn off the appliance,
the screen speed stage turns off.
3.2 Efficient Use in terms of
Energy Saving
•When using your appliance, adjust the
speed settings according to vapour and
odour intensity, in order to save energy.
•Use low speeds (1-2) under normal condi-
tions, and high speed (3) for intense odour
and vapour.
•* The lamps on the hood are placed for illu-
minating the cooking area.
Using them for environmental lighting shall
cause unnecessary energy expenditure and
insufficient lighting.
3.3 Operation of the Hood
•Your appliance contains a motor that has
various speeds.
•For better performance, we recommend
using low speeds under normal conditions
and high speeds in cases of strong odours
and intense vapour.
•You can start your appliance by pressing on
the desired speed setting button. (B,C,D)
•You can illuminate the cooking area by
pressing the lamp. (A)
3.4 Automatic Stop
Your appliance has Automatic Stop feature,
enabling it to ventilate for a bit more and re-
move the unwanted odours and vapour inside
the environment and turn off automatically af-
ter the cooking is done. To enable Automatic
Stop feature, press the any speed stage but-
ton (B, C, D) on the control panel for longer
than 2 seconds; the 15-minute timer function
shall be activated. When the automatic stop
feature is active, pressing the same speed
button shall disable the automatic stop func-
tion and the appliance's motor shall stop. This
feature is disables when you switch between
different speed stages.
If you want the appliance to stop automati-
cally, you need to enable the automatic stop
feature again.

10 / EN Cooker Hood / User Manual
3 Operation of the Appliance
3.5 Replacement of Lamp
(Figure 3)
Make the electrical connections of the appli-
ance. Your appliance uses 3W spot LED lamp.
For replacing the lamps, push downwards
on the holder from its behind, turn it coun-
ter-clockwise, and take it out downwards.
Apply the above operation in reverse to install
new lamps (Figure 3).
3.6 Operation with Chimney
Connection
•Vapour is extracted through
the Chimney duct, which is fas-
tened to the connection head
on the hood.
•The diameter of the Chimney duct must be
the same as the connection ring. In hori-
zontal settings, the pipe has to have a slight
upward slope (around 10º) so that the air
can exit the room easily.
3.7 Operation without Chimney
Connection
•Air is filtered through the
carbon filter and recirculated in
the room. Carbon filter is used
when it is impossible to use a
Chimney in the house.
•In Chimney less use, remove the flaps inside
the Chimney adapter.
•Remove the Aluminum Grease Filter. To in-
stall the carbon filter, fit the filter to the tabs
by centring it on the plastic piece on both
sides of the fan body. Tighten it by turning
right or left.
•Replace Aluminum Grease Filter.
Bulb
Bulb Power (W) 3
Holder / Socket GZ 10
Bulb Voltage (V) 220 - 240
Size (mm) 53 x 50
ILCOS Code DR/F3-220-240-
GZ10-50-53

Cooker Hood / User Manual 11 / EN
4 Cleaning and Maintenance
CBefore cleaning and mainte-
nance, unplug the product or turn
off the switch.
4.1 Cleaning of the Aluminum
Grease Filter
This filter retains the oil particles in the air.
Aluminum Grease Filters may change colour
as they are washed; this is normal and does
not require replacing your Aluminum Grease
Filters.
(Figure 4)
•Push the Aluminum Grease Filter lock for-
ward.
•Then pull it slightly down and pull it out (Fig-
ure 4). Otherwise, you can bend the filter.
Wash and rinse Aluminum Grease Filters
with liquid detergent and replace Aluminum
Grease Filters to their sockets by by carry-
ing out the steps specified above in reverse
order. This filter retains the oil particles in
the air.
C
You may wash your Aluminum
Grease Filters in the dishwasher.
A
CAUTION
In case of normal use, clean your
filter once in a month.
4.2 Replacement of Carbon
Filters
Odour removing filters contain charcoal
(Active carbon). Grease filters must be in-
stalled in the product, regardless of whether
or not charcoal filters are used.
(Figure 5)
•Remove the Aluminum Grease Filter
(Figure 4).
•To remove the carbon filter, remove the
carbon filter from its housing by rotating it
counter-clockwise from the tab (Figure 5).
•Install the new carbon filter.
•Install the Aluminum Grease Filter.
A
CAUTION
Carbon filter shall never be
washed.
A
CAUTION
Replace carbon filters once every
3 months.
A
CAUTION
You can obtain the carbon filter
from the authorized services.

12 / EN Cooker Hood / User Manual
5.2 Installation Accessories
1. Product
2. Inner Chimney
3. Outer Chimney
4. Chimney Connection Plate
5. User Manual
6. Assembly Pattern
7. 2x Ø6mm Plastic Dowel
8. 4x Ø8mm Plastic Dowel
9. 4x 4.8x50 Wall Mount Screw
10. 2x 3.9x22 Chimney Connection Plate
Screw
11. 4x 3.5x9.5 Chimney Connection
Screw
12. 2x 3.5x9.5 blunt-ended Screw
13. Chimney Clamp
14. 150mm Plastic Chimney Adapter
15. 150/120 Plastic Chimney Adapter
The information required to make the lo-
cation suitable for the installation of the
hood is given below.
5.3 Wall Mounting
• Wall must be flat, straight and have the
sufficient bearing capacity.
• Depth of drilling holes must comply with
the length of bolts.
5 Installation Of Appliance
5.1 Position of the Appliance
•Distance between the cooker and the
cooker hood must be considered prior
to assembly. This distance should be 65
cm (Figure 6).
•Distance must be measured from the
surface of grate for gas cookers,
•from surface of glass for electric cook-
ers.
A
WARNING!
Before starting the installation,
read the safety information on
User Manual.
A
WARNING!
Failuretoinstallwithscrewsand
stabilizers in accordance with
these instructions may result
in electric shock.
For the installation of the hood, please
contact the nearest Authorized Service.
It is the customer's responsibility to pre-
pare the location and electrical installation
of the hood.
1
5
9 10 11 12 13 14 15
6 7 8
2 3 4
(Figure 6)

Cooker Hood / User Manual 13 / EN
5 Installation Of Appliance
A
CAUTION
Before drilling, ensure that there
are no power, gas or water pipes
in the close proximity of the drilling
locations.
• The bolts and dowels provided are
suitable for brick walls. For other
construction material (e.g. drywall, plate,
porous concrete), suitable fixing dowels
and nuts shall be used.
Draw a mid location line from the ceiling
perpendicular to the lower edge of the
hood.
Paste the installing template provided
within the accessories on the surface
where the hood is to be mounted. In do-
ing this operation, observe the mounting
height of the hood (Page 12 / Figure 6).
There is a tab in the middle of the Chim-
ney connection plate. Place the middle
point of this tab on the line that is drawn
perpendicular to the wall. In doing this op-
eration, adjust the hood according to the
maximum height (Page 8 / Figure 1). Mark
the holes where the Chimney connection
plate will be mounted with the help of a
pen (Figure 7/a).
Drill the marked points with Ø6mm drill
and insert 2 plastic dowels in the drilled
holes (Figure 7/a). Fix the Chimney con-
nection plate to the wall with 3,9x22
screws (Figure 7/a).
To assemble the hood body, you can use
the Ø8mm drill bit to drill points A, B, C,
D on the assembly template, and insert
4.8x50mm plastic dowels at these points.
(Figure 7/b).
2 piece 4.8x50 suspension screw with
a clearance of 5 mm between the screw
head and the wall (Figure 7/b).
1. Hanger Plate
2. Hanging Plate Connection Screw
In order to install your hood to the wall,
loosen the screws on the hanger plates
mounted on the motor cabin and pull them
up, and then fasten again (Figure 8 / A).
Turn on the suction glass of the hood and
remove the aluminum Aluminum Grease
Filter (Page 11 / Figure 4).
(Figure 7)
(Figure 8)

14 / EN Cooker Hood / User Manual
5 Installation Of Appliance
5.4 Connecting to Chimney
1- Flap Pin Socket
2- Flap Pin
Insert the plastic pin (Figure 11 / area no. 2)
on the pin socket on the motor exhaust (Figure
11 / area no.1). Then bend the flap lightly to
insert the other pin on the flap and insert the
other pin to its socket (Figure 11).
If you are going to use the Ø 120/150 mm
plastic Chimney adapter, connect one end of
the pipe to this adapter, if you are not going
to use it, to the direct output on the product.
Connect the other end of the pipe to your
Chimney. Check that these two connections
are tight enough so they will not come out
when the appliance runs on full power. Ensure
that the flaps inside the Chimney work when
tightened with clamp. Connect the Chimney
connection duct outside the adapter (Figure
12/a). If the connection duct is fitted inside
the adapter, suction of air shall not occur as
the Chimney flap that prevents the return of
air will remain closed (Figure 12 / b). The
length of the pipe connection as well as the
number of elbows must be as minimum as
possible.
A : Chimney exit pipe
B : Chimney Clamps
C: Plastic Chimney
The valves are closed then the appliance is
not operating and prevent possible outside
odour and dust from entering inside.
Hold the cooker hood by its body and place it
on the mounting screws on the wall and tight-
en the screws (Figure 10).
Secure the cooker hood with two 4.8x50
screws to the wall through the mounting hole
on the interior of the appliance (Figure 10).
Attach the 150mm plastic chimney adapter
included in the package to the product body
with 3.5x9.5 blunt-ended screws. If the air
outlet is to be connected to the air discharge
duct smaller than 150mm, install the 150 /
120mm plastic Chimney adapter (Fig. 9).
(Figure 10)
(Figure 9)
(Figure 11)

Cooker Hood / User Manual 15 / EN
5 Installation Of Appliance
5.5 Installation of the Hood to
the Chimney
Make the electrical connection of your
hood before starting the installation of the
Chimney. Slip the Chimney plates around
the body. Screw the Chimney to the Chim-
ney fastening plates available on the mo-
tor cabin. (Figure 13).
Install the Chimney to the Chimney fas-
tening plate that is secured to the wall
1
2
3
4
5
6
(Figure 13)
(Figure 12)
Suitable Not Suitable

16 / EN Cooker Hood / User Manual
6Troubleshooting
Troubleshooting Root Cause Help
Appliance is not
working. Check your fuses. Fuse may be blown, inspect and restore it.
Appliance is not
working. Check the electrical connection. Mains voltage shall be between 220 and 240 V.
Appliance is not
working. Check the electrical connection. Check if other appliance in your kitchen operate.
Illumination light
does not operate. Check the electrical connection. Mains voltage shall be between 220 and 240 V.
Illumination light
does not operate. Inspect the lamp switch. Lamp switch shall be at "on" position.
Illumination light
does not operate. Inspect the lamps. The lamps of the appliance shall illuminate.
Air inlet of the appli-
ance is inadequate. Inspect the aluminium filter. Under normal operating con- ditions, Aluminum Grease
Filter shall be cleaned at
least once in a month.
Air inlet of the appli-
ance is inadequate. Check the air discharge Chimney. The air discharge Chimney shall be at “on” position.
Air inlet of the appli-
ance is inadequate. Inspect the carbon filter. The filters of the appliances with carbon filters shall
be replaced once in every
3 months under normal
conditions.

¡Por favor, lea esta guía primero!
Estimado cliente,
Gracias por elegir un producto BEKO. Nos gustaría que sacara el máximo provecho
de este producto de alta calidad que ha sido fabricado con tecnología punta. Por
favor, asegúrese de leer y entender completamente esta guía y la documentación
complementaria antes de usarla y guárdela como referencia. Entregue esta guía junto
al aparato si se entrega o vende a otra persona. Observe todas las advertencias e
información aquí contenidas y siga las instrucciones.
Tenga en cuenta que esta guía del usuario se puede aplicar a varios modelos de
aparato. La guía indica claramente las posibles variaciones de los diferentes modelos.
Símbolos y sus significados
Estos símbolos se utilizan a lo largo de esta guía:
CInformación importante y recomendaciones sobre el
uso del aparato.
A¡PRECAUCIÓN! Advertencias sobre lesiones perso-
nales o daños a la propiedad.
BAdvertencia de descarga eléctrica.
Riesgo de fuego.
Cumple con la Directiva WEEE. No incluye PCB.
Este producto fue fabricado sin dañar la naturaleza en instalaciones modernas respetuosas con el
medio ambiente.

18 / ES Campana de cocina / Manual de usuario
1.1 Seguridad general
Instrucciones de seguridad im-
portantes - Léalas detenidamente
y guárdelas para consultarlas en
el futuro Esta sección contiene
instrucciones de seguridad que
ayudarán a protegerse contra
riesgos de incendio, descargas
eléctricas, exposición a fugas de
ondas microondas, lesiones per-
sonales o daños a la propiedad. El
incumplimiento de estas instruc-
ciones anulará cualquier garantía.
•Los productos de Beko cumplen
con las normativas de seguridad
aplicables; por lo tanto, en caso
de que se produzcan daños en el
aparato o en el cable de alimen-
tación, éste deberá ser reparado
o sustituido por el distribuidor,
el servicio técnico o servicio
especializado y autorizado para
evitar cualquier peligro. Las re-
paraciones realizadas por per-
sonal no cualificado pueden ser
peligrosas y causar riesgos para
el consumidor.
•Este aparato está destinado
para usos domésticos y simila-
res como en:
– Zonas de cocina para perso-
nal en tiendas, oficinas y otros
entornos laborales;
– Granjas;
– Clientes en hoteles, y otros
entornos de tipo residencial;
– Entornos tipo alojamiento y
desayuno.
•Use el aparato sólo para el fin
previsto, tal como se describe
en este manual.
•El fabricante no se hace respon-
sable de los daños causados
por la instalación o el funciona-
miento inadecuado del aparato.
•Los niños a partir de los 8 años,
las personas con discapacida-
des físicas, sensoriales o men-
tales, así como las personas
que carecen de experiencia y
conocimientos, podrán utilizar
este aparato siempre y cuando
se les vigile e instruya sobre el
uso en condiciones de seguri-
dad, y que comprendan los pe-
ligros que entraña el uso.
•No deje que los niños jueguen
con el aparato. Los niños no
deberán realizar la limpieza y el
mantenimiento sin estar vigila-
dos por parte de un adulto.
•La distancia mínima entre la
superficie de apoyo de los re-
1 Instrucciones importantes sobre seguridad y medio ambiente

Campana de cocina / Manual de usuario 19 / ES
cipientes de cocción en la placa
de cocina y la parte más baja del
aparato debe ser de al menos
65 cm..
•Si en las instrucciones de ins-
talación de la cocina de gas se
especifica una distancia mayor,
ésta deberá respetarse.
•Asegúrese de que la alimenta-
ción eléctrica cumpla con las
indicaciones de la placa de ca-
racterísticas del aparato.
•Nunca utilice el aparato si el
cable de alimentación o el pro-
pio aparato están dañados.
•Evite daños al cable procurando
que no sufra tirones, no se doble
y no roce con bordes afilados
para evitar dañarlo. Mantenga
el cable de alimentación alejado
de las superficies calientes y de
fuentes de fuego.
•Utilice el aparato sólo con una
toma de corriente con conexión
a tierra.
ADVERTENCIA: No conecte el
aparato a la red eléctrica hasta
que la instalación esté completa-
mente terminada.
•Coloque el aparato de manera
que el enchufe sea siempre ac-
cesible.
•No toque las luces cuando han
estado encendidas por mucho
tiempo. Se puede quemar con
ellas, ya que estarán calientes.
•Siga las normas establecidas
por las autoridades competen-
tes sobre la descarga del aire de
escape (esta advertencia no es
aplicable para el uso sin chime-
nea).
•Encienda el aparato después de
colorar una olla o sartén sobre
el quemador. De lo contrario, la
temperatura alta puede condu-
cir a la deformación de algunos
componentes del aparato.
•Apague el quemador antes de
retirar la olla, la sartén, etc. del
mismo.
•No deje aceite caliente sobre el
quemador. Las cacerolas con
aceite caliente pueden causar
autocombustión.
•Preste atención a sus cortinas y
cubiertas ya que el aceite puede
incendiarse al cocinar alimentos
como las papas fritas.
•El filtro de grasa debe ser lim-
piarse al menos una vez al mes.
El filtro de carbón debe ser re-
1 Instrucciones importantes sobre seguridad y medio ambiente

20 / ES Campana de cocina / Manual de usuario
emplazado al menos cada 3
meses.
•El producto se limpiará de
acuerdo con el manual del
usuario. Si la limpieza no se ha
llevado a cabo de acuerdo con
el manual de usuario, puede
haber riesgo de incendio.
•No utilice materiales filtrantes
no resistentes al fuego en lugar
del filtro.
•Utilice únicamente las piezas
originales o las recomendadas
por el fabricante.
•No utilice la campana sin el filtro
ni los quite mientras el aparato
esté funcionando.
•En caso de que se encienda
alguna llama, desactive el pro-
ducto y los aparatos de cocina.
•En caso de que se encienda una
llama, cúbrala y nunca use agua
para apagarla.
•Desenchufe el aparato antes de
cada limpieza y cuando el apa-
rato no esté en uso.
•La presión negativa en el am-
biente no debe exceder los 4
Pa (4 x 10 bar) mientras que la
campana para la cocina eléc-
trica y los electrodomésticos
que funcionan con otro tipo de
energía pero con electricidad
funcionan simultáneamente.
•En el entorno en el que se utiliza
el aparato, el escape de los dis-
positivos que funcionan con fuel
o gas, como los calentadores de
habitaciones, debe estar abso-
lutamente aislado o el aparato
debe ser de tipo hermético.
•Al conectar el conducto de
humos, utilice tubos con un
diámetro de 120 o 150 mm. La
conexión de la tubería debe ser
lo más corta posible y tener el
menor número de codos posi-
ble.
¡Peligro de asfixia! Mantenga
todos los materiales de embalaje
lejos de los niños.
¡PRECAUCIÓN! Cuando este uti-
lizando aparatos de cocina, las
piezas accesibles podrían que-
mar.
•La salida del producto no debe
estar conectada a canales de
aire que incluyan otros humos.
•La ventilación de la habitación
puede ser insuficiente cuando la
campana extractora eléctrica se
utiliza simultáneamente con los
1 Instrucciones importantes sobre seguridad y medio ambiente