TAKT T01 Cross Chair Tube Instruction Manual

T01 Cross Chair
Building Instructions

T01 Cross Chair
Building Instructions

Important Notice
Only use the listed tools.
Do not use power tools.
Tighten in accordance with the
building instructions.
Avoid over-tightening.
There is no need for strong force.
2 x base components

1x backrest
1x seat
4x metal washers
2x screws (20mm)
2x metal collars
1x Allen key
4x screws (85mm)

Product Information
‘T01 Cross Chair’ is a chair
designed for indoor use.
The chair is tested according to
EN-16139 - L1.
Materials
Seat and back: Molded plywood (oak and beech)
Frame: Solid oak
Surface treatment: Water-based lacquer
Fittings: Steel
Tests & Declarations
The chair has passed the furniture test EN-16139 - L1.
The chair is not treated with or containing
disinfective biocides.
Weight
5,0 kg

502 mm
457 mm
767 mm
476 mm
Dimensions

8Join the base components

9
Place the seat on top of the base components

x4 x4

x2 x2 11

Enjoy your new chair.

Spare Parts
TAKT offers spare parts
for ‘T01 Cross Chair’.
Spare parts are avail-
able from TAKT without
charge for a period of
five years from the date
of purchase if the parts
are found to be faulty
during normal use. If
the parts are damaged
by misuse, spare parts
can be purchased from
TAKT.
TAKT always strives to
deliver spare parts to
you in the fastest and
most efficient way in
order for your furniture
to return to a functional
condition.
Please contact TAKT
for enquiries regarding
spare parts.
Additional Information
TAKT provides an extended
warranty of 5 years on
‘T01 Cross Chair’.
Warranty
The warranty covers
breakage of frames
and damage occurred
because of deficient
craftsmanship under
normal use.
The warranty shall lapse
if the product shows
signs of inappropriate
use or other physical
damage. The warranty
does not cover wear or
damage to upholstery,
wheels, surfaces and
the like.
Maintenance
TAKT maintenance
guide is accessible on
our web site.
www.taktcph.com/
product-care/
Recycling &
Disassembly
We hope that your TAKT
product will serve you
well for many, many
years. If you at one point
want to recycle it, please
separate its components
for sorting.
Loosen screws by
turning the Allen key
counterclockwise to
separate the different
parts.
Metal parts can be
delivered to a suitable
facility for recycling.
Wooden parts can
also be delivered to
a suitable facility for
recycling or used for
energy recovery through
incineration.
[email protected]

1x seat (wood)
1x backrest (wood)
2x base
components
(wood)
2x collars (metal)
2x screws
20mm (metal)
4x washers (metal)
4x screws
85mm (metal)

taktcph.com