Belshaw Brothers 616B User manual

Item Number and Serial Number are listed on a data tag attached to the equipment.
This manual should only be used with the Item Number(s) shown above.
SUPPORT
The #1 Source for Donut and Bakery Equipment www.belshaw.com
USA/Canada 1-800-BELSHAW
International ([phone]
Email [email protected]
Web www.belshaw.com
SERIAL NUMBER
Donut Fryer
Model: 616B
ITEM NUMBER
8848011 208V/60Hz/1-Phase, Domestic 8848014 236V/50-60Hz/1-Phase, International CE
8848012 236V/60Hz/1-Phase, Domestic 8848015 236V/50-60Hz/1-Phase, International
Part of
Cut-N-Fry
system
(optional)
OPERATOR'S MANUAL
TECHNICAL SUPPLEMENT
PARTS AND ELECTRICAL DIAGRAMS

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B TS MN-1138EN 1
Counter Top Fryer
616B
Operator’s Manual
Belshaw Adamatic Bakery Group
814 44th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: [phone] •([phone]
[e-mail] •www.belshaw.com

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
2 MN-1137EN 616B OM
EQUIPMENT RECORD
Please provide the information below when you correspond with Belshaw about your machine.
Purchased by _____________________________________________________________________
Installed by ______________________________________________________________________
Date of Installation ________________________________________________________________
Model: 616B Countertop Fryer _______________________________________________________
Serial number
IN CASE OF DAMAGE TO EQUIPMENT
In case of damage to the equipment upon delivery, follow these steps immediately.
1. Inform the freight carrier. The phone number will be on the shipping receipt or label.
2. Take photographs of the equipment, both inside and outside the box or crate.
3. Do not throw away any packaging.
4. Report the damage to the distributor (or other party) from whom you bought the equipment.
5. Email your photos to the distributor (or other party) AND to Belshaw Customer Service at
[e-mail]. Include a Belshaw Order Number in your communications. Your Order
Number will begin with “CO…, followed by 6 digits) and should be marked on the box or crate.
IN CASE OF MISSING ITEMS
1. If possible, note the missing items on the delivery receipt of the freight carrier.
2. Take photographs of the entire shipment.
3. Follow steps 2 – 5 above.
021017
MN-1137EN
Belshaw Adamatic Bakery Group
814 44th Street Northwest, Suite 103
Auburn, WA 98001 USA
Phone: [phone] •Fax: [phone]
E-mail: [e-mail] •http://www.belshaw-adamatic.com

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B OM MN-1138EN 3
Contents
Sections
1Operation 5
Frying Tips 6
2Cleaning 7
Cleaning the Exterior Surfaces 7
Cleaning the Frying Screen 7
Cleaning the Kettle 7
3Donut-Making Helps 9
Tips on Making Quality Cake Donuts 9
Calculating Correct Water Temperature 10
Ratios of Plunger Sizes to Donut Weights 10
Temperature Conversion 10

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
4 MN-1137EN 616B OM
Preface
The 616B and 616BT donut fryers have been
designed and built using the finest materials and
components available. It is the result of years of
research and development. Designed into this
unit are many features which will insure more
quality in your products and reduce your
operating cost. Attention to the instructions
regarding installation, operation, and
maintenance should result in years of trouble-free
service.
The operator must work safely at all times and
read this manual and follow its instructions and
warnings. A thorough understanding of how to
install, maintain, and safely operate the fryer will
prevent production delays and injuries.
Heed the following warnings and all other
warnings that appear in this manual:
•To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
•Never let water and hot shortening come
in contact with each other. Moisture
causes hot shortening to spatter, which
may cause serious burns.
•Do not overfill the kettle with
shortening. If shortening overflows the
kettle, it could cause serious burns or
could cause someone to slip on the floor
and be seriously injured.
•Hot shortening can cause serious burns.
Make sure that the system and the
shortening are cool before attempting
any cleaning, adjustment, disassembly,
or repair.
•To avoid electrocution or other injury,
unplug the machine before attempting
any cleaning, adjustment, disassembly,
or repair.
•Be careful never to get shortening, water,
or other materials on the floor. If
anything does get spilled on the floor,
mop it up immediately. Materials on the
floor can cause people to slip or fall,
resulting in serious injury or loss of life.
•To prevent unintentional startup and
possible fire, unplug the machine if there
is a local power outage. When the power
is restored, it is safe to plug the machine
in again.
•To avoid electrocution, make sure that
all electrical cords are not frayed or
cracked and that they do not pass
through any water or shortening.
•Make sure that all electrical cords are
routed so that no one will trip over them.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B OM MN-1137EN 5
1 Operation
Read each step completely before doing what it
tells you to do.
1. Put enough shortening in the kettle to
completely cover the heating elements,
thermocouple, and high-temperature limit
control probe.
Put shortening in the kettle using one of
these methods:
WARNING
Hot shortening causes severe burns.
•Melt shortening in a pan on the stove and
pour it into the kettle.
•Put solid shortening into the kettle,
packing it tightly around the heating
elements, thermocouple, and high-
temperature limit control probe.
WARNING
Air spaces can cause the shortening to
overheat and catch on fire.
2. Turn on the unit by turning the thermostat
clockwise 1/16 turn. When the unit is turned
on, the power light located next to the
thermostat knob will be lit.
3. Set the thermostat to 250°F/121°C. The
“Heating” pilot light above the elements will
light up, indicating that the shortening has
not yet reached the selected temperature.
4. Continue adding shortening to the kettle
until it reaches the “Oil Level” marks on the
kettle. Use one of the following methods.
•Melt shortening in a pan on the stove and
pour it into the kettle.
•Very carefully put solid shortening into
the kettle.
WARNING
To avoid serious burns, be very careful not
to splatter hot shortening when you add
shortening to the kettle.
Because shortening expands as it increases
in temperature, put shortening in the kettle
gradually. Let the shortening in the kettle
heat up before you add more.
5. After all of the shortening has melted, set the
thermostat to the desired frying temperature.
The “Heating” pilot light will go out if the
high temperature limit control breaks the
circuit.
Note: If the high temperature limit control
does break the circuit, push the red reset
button on the back of the heater head.
6. Wait for the shortening to reach the desired
temperature.
WARNING
To avoid serious burns, when the fryer is
operating, do not touch any part of the
fryer that is in contact with hot shortening.
7. If you are frying cake or French donuts,
move the cutter into place over the fryer.
Refer to the cutter manual (Type N cutter)

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
6 MN-1137EN 616B OM
for complete installation and operation
instructions.
To fry yeast-raised donuts, place donuts on
the fry screen and slowly lower the screen
into the fryer. With the donut stick, turn the
donuts over to fry the top side. Remove the
fry screen and donuts when the donuts are
completely fried by lifting up the fry screen
with the donuts on top of it. Immediately
place on or over a tray to catch dripping
shortening.
WARNING
Hot shortening will drip off the fry screens,
causing a slip hazard. To avoid serious
injury or loss of life, be very careful and
immediately clean up any drips.
WARNING
To avoid serious burns, be careful of hot
shortening dripping from the fry screens.
Do not touch hot shortening and
immediately clean up spills and drips.
8. Continue supplying shortening to the kettle
as required. Keep the kettle filled up to the
“Oil Level” marks on the side.
9. When you are done frying donuts, move the
thermostat knob counter-clockwise as far as
it will go.
Frying Tips
1. Use a high quality hydrogenated shortening.
2. Store your supply of cooking shortening at
room temperature.
3. To prolong the life of the shortening, do not
keep shortening at high temperature if the
fryer is not being used.
4. Drain and strain shortening periodically.
Several layers of cheesecloth will do a good
job of filtering.
5. Keep the fryer and screens clean.
6. Maintain shortening at the proper level in the
fryer. Add fresh shortening to keep the level
at the “Oil Level” marks stamped on the
kettle sides.
7. Add at least 15% fresh shortening to your
kettle daily.
8. Discard shortening as soon as it tends to
bubble or foam during frying.
9. At least once a day, cool a small sample of
shortening from the fryer and taste it to see if
it has picked up a foreign or rancid taste.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B OM MN-1137EN 7
2 Cleaning
For your safety, observe the following warnings
throughout the entire cleaning process.
WARNING
Thoroughly clean and dry the floor if
shortening, water, or other materials are
spilled. Materials spilled on the floor can
cause serious injury or loss of life.
WARNING
To avoid electrocuting yourself or
damaging the machine, never allow water,
steam, shortening, cleaning solution, or any
other liquid to enter the electrical box or
the heater head.
WARNING
To avoid being burned in an explosion,
never use any flammable materials for
cleaning.
Cleaning the Exterior
Surfaces
1. Clean the polished and painted surfaces of
the fryer with a soft, damp cloth. Use a non-
abrasive cleaner to remove any
discoloration.
2. Polish these surfaces with a soft, dry cloth.
Cleaning the Frying Screen
1. In a sink or a dishwasher, wash the frying
screen using warm water and mild detergent.
Do not use an abrasive cleaner or scraper.
2. Rinse the frying screen in clear water.
3. Dry the frying screen thoroughly, using a
soft cloth, before you use it again.
WARNING
Dry the frying screen thoroughly.
Moisture causes hot shortening to spatter,
which may cause serious injury.
4. Check the frying screen to make sure no
metal is flaking off of it. If the screen is
flaking, replace it immediately, so you do
not get metal particles in your product.
Cleaning the Kettle
Removing the Shortening
WARNING
To avoid being burned or electrocuted,
disconnect the fryer from the power source
before cleaning it.
1. Disconnect the machine from the power
source.
2. Let the shortening cool to 100°F/38°C.
3. Carefully dip out the shortening into a
suitable container. Do not disturb the
accumulated sediment in the bottom of the
kettle.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
8 MN-1137EN 616B OM
WARNING
Do not use a plastic container. If the
shortening is not cool enough, the container
will melt, possibly causing you to be
burned, and causing shortening spill.
WARNING
Do not allow the shortening to overflow the
containers. Shortening will get on the
floor, and if the shortening is not cool
enough, you may be burned.
4. After the kettle has been drained, brush any
accumulated carbon from the heater coils.
Accumulated carbon causes corrosion and
poor heat recovery.
5. Remove the drain tray.
WARNING
Thoroughly clean and dry the floor if
shortening is spilled. Shortening on the
floor can cause serious injury or loss of life.
6. Remove the heater head and element.
7. Lift out the kettle and pour out the remaining
shortening and accumulated sediment.
8. Flush out the kettle with hot water to remove
all sediment.
Washing
1. Wash the kettle carefully with detergent to
remove all stains and burned shortening.
2. Scrub the inside of the kettle. Do not use
any abrasive cleaners or scrapers.
WARNING
To avoid being burned, be very careful as
you work with hot cleaning solution. Never
put your hands in the solution. Wear
gloves and long sleeves in case any solution
splashes.
3. Dry the kettle thoroughly with a soft cloth
before replacing in the fryer cabinet.
WARNING
Dry the kettle thoroughly. Moisture causes
hot shortening to spatter or erupt.
Shortening may spatter or overflow the
sides of the fryer may result in fire, serious
injury, or death.
4. Make sure the kettle is properly seated in the
case.
5. Install the heater head.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B OM MN-1137EN 9
3 Donut-Making Helps
Tips on Making Quality
Cake Donuts
•Use the correct batter temperature.
In general, the correct batter temperature is
75°-80°F/24°-27°C. Check the mix
manufacturer’s instructions, as the
recommended temperature range may vary.
If the batter is too warm, the donuts will lack
volume and may “ring out” or be misshapen.
If the batter is too cold, the donuts will stay
under the shortening too long, fry too slowly,
and crack open or ball up. They may also
absorb excess shortening and lose volume.
•Use the correct floor time.
A floor time of 10 minutes between mixing
and cutting allows the baking powder to
react with the water. This helps the donuts
attain the proper volume the proper level of
shortening penetration.
If the floor time exceeds 30 minutes, the mix
will gas off, the donuts will lose volume and
shape and will absorb too much shortening.
•Use the correct frying temperature.
The correct shortening temperature for
frying is 370°-380°F/188°-193°C.
If the shortening is too hot, the donuts will
fry too quickly on the outside and will lose
volume. The donuts may also become dense
inside.
If the shortening is too cold, the donuts will
spread too rapidly, will form large rings, will
tend to crack open, will be too light in
appearance, and will absorb too much
shortening.
•Maintain the proper shortening level. We
recommend a distance of 1 1/4” between the
cutter and the shortening.
If the shortening is too deep, the donuts may
not turn over when they reach the turner,
causing them to cook unevenly.
If the shortening is too shallow (too far
below the cutter), the donuts may not drop
flat, may turn over while submerging and
surfacing, and may become irregular,
cracked, or rough-crusted.
•Ensure that the donuts absorb the right
amount of shortening.
Donuts should absorb 1-1/2 to 3 oz/42 to 85
g of shortening per dozen, depending on
their weight. You can achieve proper
absorption by following tips 1-3.
•If the donuts do not absorb enough
shortening, they will not keep well.
If they absorb too much shortening, they will
lose volume and may become misshapen. If
this happens, follow tips 1-3, mix the batter
a little longer than usual, turn the donuts as
soon as they become golden brown, and turn
the donuts only once.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
10 MN-1137EN 616B OM
Calculating Correct Water
Temperature
The following is an example of how to calculate
the correct water temperature to use. You must
use your own room temperature, dry mix
temperature, desired batter temperature, and, if
you are making yeast-raised donuts, estimated
temperature increase during mixing.
Cake Donuts Yeast-Raised Donuts
°F
°C
°F
°C
Room temperature
72
22.2
72
22.2
Dry mix temperature
+70
+21.1
+70
+21.1
Total A
142
43.3
142
43.3
Desired batter temperature
75
23.9
80
26.7
x3
x3
x3
x3
Total B
225
71.7
240
80.1
Total B
225
71.7
240
80.1
-Total A
-142
-43.3
-142
-43.3
Desired water temp. for cake donuts
83°F
28.4°C
98
36.8
↓
↓
Figure from above
98
36.8
Temperature increase during mixing (average: 30°F/17°C)
-30
-17
Desired water temperature for yeast-raised donuts
68°F
19.8°C
Ratios of Plunger Sizes to
Donut Weights
The weights given are for donuts without icings
or other toppings. They are provided for
reference only, as weights vary according to the
density of the batter.
Plunger Size Donut Weight per
Dozen
1”
5-8 oz/142-227 g
1 7/16”
10-17 oz/283-482 g
1 9/16”
14-21 oz/397-595 g
1 13/16”
19-23 oz/539-652 g
Temperature Conversion
To convert temperatures from Fahrenheit to
Celsius, subtract 32 from °F and divide the result
by 1.8. For example, 212°F-32/1.8 = 100°C.
To convert temperatures from Celsius to
Fahrenheit, multiply °C by 1.8 and add 32 to the
result. For example, (100°C x 1.8) + 32 = 212°F.
°
F
°
C
°
F
°
C
55
12.8
340
171.1
60
15.6
345
173.9
65
18.3
350
176.7
70
21.2
355
179.4
75
23.9
360
182.2
80
26.7
365
185.0
325
162.8
370
187.8
330
165.6
375
190.6
335
168.3
380
193.3

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B TS MN-1138EN 1
Counter Top Fryer
616B
Technical Supplement
Belshaw Adamatic Bakery Group
814 44th Street NW, Suite 103
Auburn, WA 98001 USA
Phone: [phone]•([phone]
[e-mail] •www.belshaw.com

Belshaw Adamatic Bakery Group •[email protected]m •800-578-2547 • ([phone]
2 MN-1138EN 616B TS
EQUIPMENT RECORD
Please provide the information below when you correspond with Belshaw about your machine.
Purchased by _____________________________________________________________________
Installed by ______________________________________________________________________
Date of Installation ________________________________________________________________
Model number ____________________________________________________________________
Serial number
IN CASE OF DAMAGE TO EQUIPMENT
In case of damage to the equipment upon delivery, follow these steps immediately.
1. Inform the freight carrier. The phone number will be on the shipping receipt or label.
2. Take photographs of the equipment, both inside and outside the box or crate.
3. Do not throw away any packaging.
4. Report the damage to the distributor (or other party) from whom you bought the equipment.
5. Email your photos to the distributor (or other party) AND to Belshaw Customer Service at
[e-mail]. Include a Belshaw Order Number in your communications. Your Order
Number will begin with “CO…, followed by 6 digits) and should be marked on the box or crate.
IN CASE OF MISSING ITEMS
1. If possible, note the missing items on the delivery receipt of the freight carrier.
2. Take photographs of the entire shipment.
3. Follow steps 2 – 5 above.
021017
MN-1138EN
Belshaw Adamatic Bakery Group
814 44th Street Northwest, Suite 103
Auburn, WA 98001 USA
Phone: [phone] •Fax: [phone]
E-mail: [e-mail] •http://www.belshaw-adamatic.com

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B TS MN-1138EN 3
Contents
Sections
1Installation 5
Unpacking the Fryer 5
Initial Cleaning 5
Installing the Fryer 5
Moving the Fryer 6
2Cleaning 7
Cleaning the Exterior Surfaces 7
Cleaning the Frying Screen 7
Cleaning the Kettle 7
3Calibrating The Fryer 9
Calibration of 618-0006 Temperature Indicator 9
4Cut-N-Fry Installation with Type N Depositor (Optional) 10
Mounting Instructions 10
5Parts Lists and Diagrams 12

Belshaw Adamatic Bakery Group •[email protected]m •800-578-2547 • ([phone]
4 MN-1138EN 616B TS
Preface
The 616B and 616BT donut fryers have been
designed and built using the finest materials and
components available. It is the result of years of
research and development. Designed into this
unit are many features which will insure more
quality in your products and reduce your
operating cost. Attention to the instructions
regarding installation, operation, and
maintenance should result in years of trouble-free
service.
The operator must work safely at all times and
read this manual and follow its instructions and
warnings. A thorough understanding of how to
install, maintain, and safely operate the fryer will
prevent production delays and injuries.
Heed the following warnings and all other
warnings that appear in this manual:
•To avoid damaging the machine, never
use force to assemble, disassemble,
operate, clean, or maintain it.
•Never let water and hot shortening come
in contact with each other. Moisture
causes hot shortening to spatter, which
may cause serious burns.
•Do not overfill the kettle with
shortening. If shortening overflows the
kettle, it could cause serious burns or
could cause someone to slip on the floor
and be seriously injured.
•Hot shortening can cause serious burns.
Make sure that the system and the
shortening are cool before attempting
any cleaning, adjustment, disassembly,
or repair.
•To avoid electrocution or other injury,
unplug the machine before attempting
any cleaning, adjustment, disassembly,
or repair.
•Be careful never to get shortening, water,
or other materials on the floor. If
anything does get spilled on the floor,
mop it up immediately. Materials on the
floor can cause people to slip or fall,
resulting in serious injury or loss of life.
•To prevent unintentional startup and
possible fire, unplug the machine if there
is a local power outage. When the power
is restored, it is safe to plug the machine
in again.
•To avoid electrocution, make sure that
all electrical cords are not frayed or
cracked and that they do not pass
through any water or shortening.
•Make sure that all electrical cords are
routed so that no one will trip over them.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B TS MN-1138EN 5
1 Installation
Unpacking the Fryer
1. Use a fork lift to transport the shipping crate
to the work station.
2. Break down the shipping crate.
3. Remove all the packing materials from the
fryer. These include foam, tape, brown
paper, plastic, and white protective coating.
4. Check the fryer carefully for any damage
that may have occurred during shipping.
File any claims with the shipping company.
5. Position the fryer to allow sufficient space
on either end of the machine for any
equipment you plan to use with it.
Initial Cleaning
Clean your fryer before using it. Wipe the inside
of the kettle with a soft, damp cloth. Dry the
kettle thoroughly.
WARNING
To avoid electrocuting yourself or
damaging the machine, never allow water,
steam, cleaning solution, or other liquid to
enter the heater head or the electrical box.
WARNING
Never let water and hot shortening come in
contact with each other. Moisture causes
hot shortening to spatter, which may cause
serious injury. Prior to use, make sure the
kettle and any other parts you have washed
are dry.
Installing the Fryer
1. Make sure the power requirements of the
machine, found on the data/name plate,
match your power source.
2. Set the fryer cabinet on a flat, dry counter or
table.
3. Level the fryer.
4. Connect the fryer to a properly grounded
power source. Do not turn on the power.
5. When first filling the kettle with shortening,
if a hydrogenated or semi-solid shortening is
used, melt some shortening and pour it into
the kettle.
6. Cover the elements, thermostat bulb and high
temperature limit control bulb with
shortening before turning on the power.
WARNING
Do not turn the thermostat above 250
°
F
until all the shortening has melted.
7. Due to the delicate mechanism of the
thermostat, it is possible for it to get out of
adjustment. If this occurs, recalibrate per the
instructions in section 4.

Belshaw Adamatic Bakery Group •[email protected]m •800-578-2547 • ([phone]
6 MN-1138EN 616B TS
8. The heater head assembly is equipped with a
high temperature limit control. Push the reset
button on the back of the heater head if
power to the heater elements is cut off.
9. When heating shortening that has solidified, a
pocket of shortening may overheat and cause
the high temperature limit control to cut
power to the elements. Push the reset button
to resume heating.
Moving the Fryer
If you ever want to move the fryer to a different
workstation, follow this procedure:
1. Turn off the fryer and disconnect it from the
power source.
2. Allow the machine and the shortening to
cool.
WARNING
Do not touch hot shortening. It can cause
serious burns.
3. Remove the shortening from the fryer as
explained in “Removing the Shortening” in
the Operator's Manual.
WARNING
To avoid burns, falls, other injury, or
death, never attempt to move the fryer
when it has shortening or other liquid in it.
WARNING
Thoroughly clean and dry the floor if
shortening is spilled. Materials on the floor
can cause people to slip or fall, resulting in
serious injury or loss of life.
6. Level the fryer and connect it to the power
source, as explained in “Installing the Fryer”
above.

Belshaw Adamatic Bakery Group •[email protected] •800-578-2547 • ([phone]
616B TS MN-1138EN 7
2 Cleaning
For your safety, observe the following warnings
throughout the entire cleaning process.
WARNING
Thoroughly clean and dry the floor if
shortening, water, or other materials are
spilled. Materials spilled on the floor can
cause serious injury or loss of life.
WARNING
To avoid electrocuting yourself or
damaging the machine, never allow water,
steam, shortening, cleaning solution, or any
other liquid to enter the electrical box or
the heater head.
WARNING
To avoid being burned in an explosion,
never use any flammable materials for
cleaning.
Cleaning the Exterior
Surfaces
1. Clean the polished and painted surfaces of
the fryer with a soft, damp cloth. Use a non-
abrasive cleaner to remove any
discoloration.
2. Polish these surfaces with a soft, dry cloth.
Cleaning the Frying Screen
1. In a sink or a dishwasher, wash the frying
screen using warm water and mild detergent.
Do not use an abrasive cleaner or scraper.
2. Rinse the frying screen in clear water.
3. Dry the frying screen thoroughly, using a
soft cloth, before you use it again.
WARNING
Dry the frying screen thoroughly.
Moisture causes hot shortening to spatter,
which may cause serious injury.
4. Check the frying screen to make sure no
metal is flaking off of it. If the screen is
flaking, replace it immediately, so you do
not get metal particles in your product.
Cleaning the Kettle
Removing the Shortening
WARNING
To avoid being burned or electrocuted,
disconnect the fryer from the power source
before cleaning it.
1. Disconnect the machine from the power
source.
2. Let the shortening cool to 100°F/38°C.
3. Carefully dip out the shortening into a
suitable container. Do not disturb the
accumulated sediment in the bottom of the
kettle.

Belshaw Adamatic Bakery Group •[email protected]m •800-578-2547 • ([phone]
8 MN-1138EN 616B TS
WARNING
Do not use a plastic container. If the
shortening is not cool enough, the container
will melt, possibly causing you to be
burned, and causing shortening spill.
WARNING
Do not allow the shortening to overflow the
containers. Shortening will get on the
floor, and if the shortening is not cool
enough, you may be burned.
4. After the kettle has been drained, brush any
accumulated carbon from the heater coils.
Accumulated carbon causes corrosion and
poor heat recovery.
5. Remove the drain tray.
WARNING
Thoroughly clean and dry the floor if
shortening is spilled. Shortening on the
floor can cause serious injury or loss of life.
6. Remove the heater head and element.
7. Lift out the kettle and pour out the remaining
shortening and accumulated sediment.
8. Flush out the kettle with hot water to remove
all sediment.
Washing
1. Wash the kettle carefully with detergent to
remove all stains and burned shortening.
2. Scrub the inside of the kettle. Do not use
any abrasive cleaners or scrapers.
WARNING
To avoid being burned, be very careful as
you work with hot cleaning solution. Never
put your hands in the solution. Wear
gloves and long sleeves in case any solution
splashes.
3. Dry the kettle thoroughly with a soft cloth
before replacing in the fryer cabinet.
WARNING
Dry the kettle thoroughly. Moisture causes
hot shortening to spatter, which may cause
serious injury.
4. Make sure the kettle is properly seated in the
case.
5. Install the heater head.