benbat Oly User manual

ON
OFF
ON
OFF
12
3
4
5
1.5V x 3
“AA” (LR06)
5
3V x 1
CR2032
6
7
8
9
9
AB
C1C2C3
BATTERY INSTALLATION
*Batteries not included*
ATTACHING THE MIRROR
MIRROR:
1. Unscrew the battery compartment door using a Phillips screwdriver.
2. Insert 3 new ‘AA’ batteries. Ensure correct polarity.
3. Close the compartment door and tighten the screw.
Note: the mirror battery usage is higher than the remote controls and
you may need to replace it more often.
BACKSEAT HEADREST
A. Insert strap underneath headrest and place mirror downwards
facing your child’s rear car seat.
B. Lock strap buckle and tighten the strap over the headrest.
C1,C2,C3. Adjust mirror to needed angle so you can see your child
in the car’s rearview mirror.
For optimal positioning, use the adjustable back legs if required
(depending on your car headrest design) .
INCLUDED PARTS:
Mirror Front
1. On\Off Switch
2. Music Switch
Mirror Back
3. Adjustable back legs
4. Adjustable strap with buckle
5. Battery compartment
REMOTE CONTROL:
1. Unscrew the battery compartment door using a Phillips screwdriver.
2. Insert 1 ‘3V’ battery. Ensure correct polarity.
3. Close the compartment door and tighten the screw.
Note: in case the mirror does not respond, check if the batteries are
placed correctly.
GETTING STARTED
1. Move the ON\OFF switch on the side of the mirror to the ON position to activate it.
2. Blinking eyes, smiling mouth and Music will start playing when mirror is activated.
*Music includes: 4 melodies to entertain and 4 white noises to sooth your child.
3. Toggle between music melodies and white noises by pressing the music button on the remote control or
on the music button on the right side of the mirror (2).
4. Adjust volume or turn off music & lights from the remote control.
Tip: For longer battery life, slide the ON\OFF switch to OFF when not in use.
Auto OFF: vibration sensor puts mirror automatically in sleep mode after 10 minutes of non-movement.
Press any button to re-activate.
Volume/Power button on remote:
Short press will switch between 2 volume levels: Mid,High.
A Long press (2+ seconds) will put the mirror in sleep mode.
Note: Keep a clear path between the mirror & the remote control for a clear signal.
FRONTSEAT HEADREST
Note: use to attach the mirror to the backside of front passenger or driver seat for entertaining forward
facing kids only. Follow steps A to C1,C2 and check that your child can see themselves in the mirror.
Remote Control Front
6. Remote transmitter
7. Volume button
8. Music button
Remote Control Back
9. Battery compartment
Safety Precaution:
- Prevent strangulation or entanglement. Never place in or attach to a crib. Never add strings or ties to the product. Never leave child
unattended.
- Inside car temperatures can rise rapidly and create a safety hazard. Children have died when left unattended inside vehicles.
- Keep mirror away from children’s reach & direct sunlight.
- Regularly ensure that the mirror is secured. Stop using immediately if damaged.
Cleaning instructions: Wipe mirror & plastic body with damp cloth.
Do not apply water directly on the mirror

INSTRUCTIONS FOR USE
KEEP FOR FUTURE REFERENCE
Item No. BM 701,702,703, 704, 705, 709, 710 EN-V04-2017
Active baby car Mirror
www.ben-bat.com
For “INSTRUCTIONS FOR USE” in more languages, please visit our website
- Do not mix old and new or different battery types together.
- Follow the insertion instruction for the batteries.
- Remove batteries when unused for prolonged period of time.
- Dispose of the batteries safely.
- Never short circuit the battery terminals.
- Use batteries as recommended.
- If rechargeable batteries are in use, always re-charge under adult supervision.
- Do not charge non-rechargeable batteries.
- Re-chargeable batteries are to be removed before being charged.
- Use caution when opening battery compartment as some batteries may leak, explode or catch on fire.
- Exhausted batteries are to be removed from the remote and main unit.
BATTERY SAFETY
INFORMATION
FCC INFORMATION:
The device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) This device must accept any interference received,
including interference that may cause undesired operation.
WARNING!: change or modifications to this unit not expressly approved by the part responsible for compliance
could void the user’s authority to operate the equipment.
Note: this equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and radiate radio frequency energy
and if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to connect the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
- Consult the dealer or an experience radio/TV technician for help.
This CLASS(B) DIGITAL APPARATUS complies with CANDIAN ICES-3(B) NMB-3(B)