Bend-Pak HD-14T User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
HD-14T
PRODUCT SKU
5175004
DRAWING Nº
5260597
CATEGORY
Four Post Li
REV
Version H
DATE
08.29.2022

DIMENSIONS ARE IN MM
☺
1
2
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5245081 HD-14T LIFT SUPERSTRUCTURE 1 F
2 5250191 HD-14T PARTS BOX 1 L
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F
REPLACED LABELS WITH COLORS & GRAPHICS
NOTE
09/27/2021 TM 01344
G UPDATED BOM REVISIONS 05/24/2022 TM 01414
H WAS 123.6 NOW 105.9, UPDATED BOM REVISION 08/11/2022 TM 01436
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260597
HD-14T PRODUCTION
LIFT VER F (CE CERT)
11/25/2019
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
OR 08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

2543.0mm
100.118in
2274.8mm
89.559in
4.063in
103.2mm
6.732in
171.0mm
3.504in MAX
89.0mm MAX
60.827in
1545.0mm
82.827in
2103.8mm
A
B
4951.0mm
194.921in
876.0 MIN - 1058.0mm MAX
[34.488 MIN - 41.653in MAX]
2942.0mm
115.827in
5926.3mm
233.318in
508.0mm
20.000in
14.961in
380.0mm
204.921in
5205.0mm
125.827in
3196.0mm
80.748in
2051.0mm
DRIVE THRU
FRONT VIEW
4.134in
105.0mm
DETAIL A
SCALE 1 : 10
4.169in
105.9mm
DETAIL B
SCALE 1 : 10
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260597
HD-14T PRODUCTION
LIFT VER F (CE CERT)
1:40
SCALE:

89.559in
2274.8mm
RAISED
88.307in
2243.0mm
TOP LOCK
7.480in
190.0mm
LOWERED
24.685in
627.0mm
LOWEST LOCK
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260597
HD-14T PRODUCTION
LIFT VER F (CE CERT)
1:30
SCALE:
DIMENSIONS SHOWN ARE WITH THE LOCK LADDED ADJUSTED ALLTHE WAY UP 1.

DIMENSIONS ARE IN MM
☺
B
3
7
2
4
1
6
5
8
DETAIL A
SCALE 1 : 3
11
10
9
DETAIL B
SCALE 1 : 20
13
15
12
14
WHERE USED
HDS-14T
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5216146 HD-14 CROSSTUBE ASSEMBLY, SMALL WINDOW 1 A
2 5216145 HD-14 CROSSTUBE ASSEMBLY, LARGE WINDOW 1 A
3 5601158 HD-14T POWER SIDE POST WELDMENT 1 A
4 5601159 HD-14T OFF SIDE POST WELDMENT 3 A
5 5215203 HD-14T POWER SIDE RAMP ASSEMBLY 1 X
6 5601435 HD-14 OFF SIDE RAMP WELDMENT 1 A
7 5600916 HD-14T SAFETY LADDER WELDMENT 4 B
8 5215104
D4-12, HD/HDS/HDSO-14 DRIVE UP RAMP
ASSEMBLY
2 J
9 5535303 NUT M20 x 2.5 4 -
10 5545343 WASHER, M20 FLAT 4 -
11 5535017 NUT M20 x 2.5 NL 4 -
12 5746382
D4-12, HDS-14 SPACER, SAFETY LADDER, 15mm LG
4 A
13 5530167 HHB M10 x 1.5 x 45mm 4 -
14 5535013 NUT M10 x 1.5 NL 4 -
15 5545341 WASHER M10 x Ø20 FLAT 8 -
NEXT ASSEMBLY
5260597
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D UPDATED BOM REVISION 08/20/2021 CA 01322
E
REPLACED 5215595 WITH 5215145, 5215596
WITH 5215146
05/23/2022 TM 01414
F UPDATED BOM REVISION 08/11/2022 TM 01436
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245081
HD-14T LIFT
SUPERSTRUCTURE
11/21/2019
DO NOT SCALE DRAWING
1:45
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.
THREAD M20 HARDWARE ONTO LADDER BOLTS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
B
6
7
3
4
1
DETAIL B
SCALE 1 : 12
5
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
WHERE USED
HD-14T
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
V UPDATED BOM REVISION 07/07/2020 TM 01174
W UPDATED BOM REVISION 11/04/2020 CA 01227
X
REPLACED (2) 5600057 WITH 5600245,
UPDATED BOM REVISION
08/20/2021 CA 01322
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600280 HD-14T POWER SIDE RAMP WELDMENT 1 D
2 5215033 HD-14 CYLINDER FLANGE ARM ASSEMBLY 1 G
3 5215141 D4-12, HD-14 RAMP SHEAVE 6 C
4 5600245 D4-12, HD-14T SHEAVE PIN WELDMENT 4 B
5 5736027 D4-12, HD-14 CABLE RETAINER PLATE 1 D
6 5502350 CYLINDER ASSEMBLY Ø3.5 x 82 1 L
7 5530776 SHCS M8 x 1.25 x 20mm 4 -
NEXT ASSEMBLY
5245081
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
X
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5215203
HD-14T POWER SIDE
RAMP ASSEMBLY
09/26/2008
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR
09/15/2021
VERIFY CYLINDER PORTS ARE CAPPED OFF WITH STEEL 1.
3/8" NPT PLUG.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.
NOTE: UNLESS OTHERWISE SPECIFIED .

546.0
14.4
14.4
14.4
5085
187.0
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
X
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5215203
HD-14T POWER SIDE
RAMP ASSEMBLY
1:10
SCALE:

DIMENSIONS ARE IN MM
☺
1
24
6
DETAIL A
SCALE 1 : 6
5
13
11
4
20
17
19
12
9
7
14
8
10
2
16
3
21
22
23
18
15
25
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601806 HD-14 CROSSTUBE WELDMENT, LARGE WINDOW 1 A
2 5215142 D4-12, HD-14T CROSSTUBE SHEAVE ASSEMBLY 2 C
3 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
4 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
5 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 2 C
6 5716005
D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE
BLOCK
8 M
7 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
8 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
9 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 --
10 5505030 PUSH-ON CLIP Ø10mm SS 2 --
11 5505625 FEMALE ROD END M6 x 33 2 --
12 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 --
13 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
14 5540275 E RING Ø25mm OD DIN 6799 0250 8 --
15 5530005 HHB M6 x 1 x 70 6 --
16 5530756 HHB M6 x 1.0 x 25mm 2 --
17 5535112 NUT M6 x 1.0 4 --
18 5545005 WASHER, M6 x 12mm FLAT 4 --
19 5545032 WASHER M36 x 66 FLAT 2 --
20 5550087 FTG ELB -04 COMP x -02 NPT 2 --
21 5755137 AIR CYLINDER SPACER 25mm 2 A
22 5755136 AIR CYLINDER SPACER 12mm 2 A
23 5535357 NUT M6 x 1.0 NL 4 --
24 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
25 5535230 NUT 1/4-28 JN 2 --
NEXT ASSEMBLY
5245081
WHERE USED
HD-14T
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215595 04/28/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216145
HD-14 CROSSTUBE
ASSEMBLY, LARGE WINDOW
04/28/2022
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
1
24
5
DETAIL A
SCALE 1 : 6
8
17
14
4
20
13
15911
18
19
16
6
12
7
10 3
22
21
2
23
25
WHERE USED
HD-14T
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601805 HD-14 CROSSTUBE WELDMENT, SMALL WINDOW 1 A
2 5215142 D4-12, HD-14T CROSSTUBE SHEAVE ASSEMBLY 2 C
3 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
4 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
5 5716005
D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE
BLOCK
8 M
6 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
7 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
8 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 2 C
9 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 -
10 5505030 PUSH-ON CLIP Ø10mm SS 2 -
11 5505625 FEMALE ROD END M6 x 33 2 -
12 5540275 E RING Ø25mm OD DIN 6799 0250 8 -
13 5530005 HHB M6 x 1 x 70 6 -
14 5530756 HHB M6 x 1.0 x 25mm 2 -
15 5535112 NUT M6 x 1.0 2 -
16 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 -
17 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
18 5545005 WASHER, M6 x 12mm FLAT 4 -
19 5545032 WASHER M36 x 66 FLAT 2 -
20 5550087 FTG ELB -04 COMP x -02 NPT 2 -
21 5755136 AIR CYLINDER SPACER 12mm 2 A
22 5755137 AIR CYLINDER SPACER 25mm 2 A
23 5535357 NUT M6 x 1.0 NL 6 -
24 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
25 5535230 NUT 1/4-28 JN 2 -
NEXT ASSEMBLY
5245081
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215596 04/28/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216146
HD-14 CROSSTUBE
ASSEMBLY, SMALL WINDOW
04/28/2022
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
17
6
9
5
11
12
13
8
16
18
19
4
20
1
3
7
2
10
14 15
21
NEXT ASSEMBLY
5260597
ITEM NO PART NUMBER DESCRIPTION QTY. REV
1 5174094 D4-12, HD/HDS-14 PARTS BAG 1 G
2 5700072 WHEEL CHOCK 2 B
3 5505009 D4-12, HD/HDS-14 DRIVE UP RAMP PIN 2 D
4 5215096 PUSH BUTTON AIR ASSEMBLY 1 G
5 5216139 FLEX TUBE KIT, UP TO 2000mm 1 A
6 5715003 POWER UNIT VIBRATION DAMPENER 1 B
7 5700032 TIRE STOP 2 D
8 5700029 HD-SERIES FLEX TUBE BRACKET PLATE 1 F
9 5700033 HD-SERIES FLEX TUBE ANGLE 1 E
10 5595139 HD-14T CABLE ASSY Ø12 x 3665mm ST 1 C
11 5595184 HD-14T CABLE ASSY Ø12 x 5270mm ST 1 C
12 5595186 HD-14T CABLE ASSY Ø12 x 8590mm ST 1 C
13 5595187 HD-14T CABLE ASSY Ø12 x 10190mm ST 1 C
14 5570795 1/4" POLY-FLO TUBING 20000mm* -
15 5570025
HD-14T HYD. HOSE ASSEMBLY Ø6.4 x 3685mm
1 D
16 5530456 AB 3/4" x 4 - 3/4" 16 -
17 5600406 HD/HDS-14 TOP PLATE WELDMENT 4 C
18 5900037 HD-14 INSTALLATION MANUAL 1 -
19 5716632 HD-14 CROSSTUBE COVER, PLASTIC 4 A
20 5210241 4 POST LIGHT DUTY CE PARTS BAG 1 A
21 5930195 ANTI-SLIP TAPE, 6” x 24ft 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
J
ADDED 5210241, REMOVED 5535011 AND
5545345, UPDATED BOM REVISIONS
07/17/2020 TM 01174
K UPDATED BOM REVISION 08/19/2021 CA 01322
L
ADDED 5930195, REPLACED 5570050 WITH
5216139
05/04/2022 TM
01414
PRE A
WHERE USED
HD-14T
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
L
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250191
HD-14T PARTS BOX
05/09/2013
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 05/09/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
HOSES AND CABLES IN REPRESENTATIONAL FORM 2.
(*) LENGTH FOR REFERENCE ONLY 3.

DIMENSIONS ARE IN MM
☺
20
23
DETAIL A
SCALE 1 : 4
1
2
DETAIL B
SCALE 1 : 4
18
17
19
DETAIL C
SCALE 1 : 8
4
3
13
12
DETAIL D
SCALE 1 : 8
97
8
6
14
16
21
22
11
15
DETAIL E
SCALE 1 : 4
10
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E
REPLACED 5550004 WITH 5550089, 5550489
WITH 5550395, UPDATED NEXT ASSEMBLIES
10/29/2013 TM 00593
F
ADDED (4) 5530009, (4) 5545201, (4)
5545347, (4) 5535354, 5550025, 5550026,
AND 5580012
11/25/2019 TM 01120
G REMOVED 5550025 AND 5550026 08/18/2021 CA 01322
NEXT ASSEMBLY
5250143
5250144
5250191
5250194
5250195
5250294
5250295
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5530756 HHB M6 x 1.0 x 25mm 8 -
2 5535357 NUT M6 x 1.0 NL 8 -
3 5535001 NUT M8 x 1.25 NL 4 -
4 5545340 WASHER M8 x24 FLAT 4 -
5 5530010 HHB M8 x 1.25 x 25mm ZPL 4 -
6 5530009 HHB M12 x 1.75 x 90 CL8.8 8 -
7 5545201 WASHER, M12 SPRING LOCK 8 -
8 5545347 WASHER, M12 FLAT WASHER 8 -
9 5535354 NUT, M12 x1.75 8 -
10 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
11 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 3 -
12 5550089 FTG ELB -04 COMP x -06 NPT 2 -
13 5550008 FTG ELB -04 JIC -06L ORB 1 -
14 5505032 ROTOR CLIP Ø18mm SS 4 -
15 5530107 HHB M14 x 2.0 x 40 4 -
16 5535107 NUT M14 x 2.0 NL 4 -
17 5545009 WASHER, M4 x 9mm FLAT 2 -
18 5530008 SHCS M4 x 0.7 x 12 BOC 2 -
19 5535010 NUT M4 X 0.7 NL 2 -
20 5545535 C WASHER SHIM FOR LIFTS 20 -
21 5545010 WASHER M14 x 28 FLAT 4 -
22 5545349 WASHER M14 x 22 SL 4 -
23 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
WHERE USED
HD-14T
HDS-14 SERIES
D4-12 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5174094
D4-12, HD/HDS-14
PARTS BAG
08/08/2008
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 09/21/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

DIMENSIONS ARE IN MM
☺
1
3
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5570050, 5570052, 5570239
05/05/2022 TM
01414
PRE A
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570053 PE FLEX TUBE Ø34.5xØ29 2100mm* -
2 5555555 WQG1-M36/AD34.5 CONNECTOR 2 -
3 5535050 PLASTIC NUT M36 x 2 2 -
WHERE USED
D4-12 SERIES
HD-14T
HD-7500 SERIES
HD-7W
HD-7P
HD-9 SERIES
HD-973 SERIES
HDS-14 SERIES
HDSO-14 SERIES
HDS-18/27/40 SERIES
NEXT ASSEMBLY
5250058 5250175 5250289
5250059 5250184 5250290
5250079 5250185 5250294
5250081 5250187 5250295
5250082 5250188 5250336
5250143 5250189 5250337
5250144 5250191 5250338
5250164 5250193 5250349
5250167 5250194 5250364
5250168 5250195
5250169 5250278
5250172 5250286
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216139
FLEX TUBE KIT,
UP TO 2000mm
05/05/2022
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR 05/10/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
SHOWN IN REPRESENTATIONAL FORM ONLY 2.
(*)LENGTH FOR REFERENCE ONLY

DIMENSIONS ARE IN MM
☺
A
1
DETAIL A
SCALE 1 : 3
4
5
2
3
NEXT ASSEMBLY
5215203
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E UPDATED NEXT ASSEMBLY AND BOM REVISIONS 03/08/2010 AC 00333
F
F-001
F-002
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
04/23/2010
12/07/2012
08/04/2014
TM
TM
TM
00351
00565
00664
G
REPLACED 5530077 WITH 5530247, UPDATED
BOM REVISION
07/07/2017 TM 00843
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600079 HD-14 CYLINDER FLANGE ARM WELDMENT 1 F
2 5716006
D4-12, HD/HDS/HDSO-14 CYLINDER FLANGE
ARM SLIDE
2 F
3 5530247 FHPS M6 x 1 x 40 4 -
4 5535112 NUT M6 x 1.0 4 -
5 5545005 WASHER, M6 x 12mm FLAT 4 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215033
HD-14 CYLINDER
FLANGE ARM ASSEMBLY
12/17/2007
DO NOT SCALE DRAWING
1:4
SCALE:
THIRD ANGLE PROJECTION
AW
7/27/2017
ASSEMBLE ITEMS AS SHOWN 1.

DIMENSIONS ARE IN MM
☺
3
1
6
2
5
4
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E REPLACED 5550481 WITH 5550087 10/29/2013 TM 00593
F
REPLACED 5590240 WITH 5590175, UPDATED
NEXT ASSEMBLIES
05/05/2015 MR 00683
G
SWITCHED POSITIONS OF 5550087 AND
5550486, UPDATED NEXT ASSEMBLY
06/16/2016 TS 00765
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5700031 ZERO ANGLE MOUNTING BRACKET 1 C
2 5590175 PUSH BUTTON AIR VALVE 1 -
3 5530043 SHCS M3 x 0.5 x 30 2 -
4 5545024 WASHER, M3 x 9mm FLAT 2 -
5 5535020 NUT M3 x 0.5, NL CL8 2 -
6 5550087 FTG ELB -04 COMP x -02 NPT 1 -
7 5550486 FTG NPL -02 NPT x -04 F NPT 1 -
NEXT ASSEMBLY
D4-12 SERIES
HD SERIES
HDS SERIES
HDSO SERIES
PL-12000DP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215096
PUSH BUTTON AIR
ASSEMBLY
03/14/2008
DO NOT SCALE DRAWING
2:3
SCALE:
THIRD ANGLE PROJECTION
CA 09/02/2015
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
2
1
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
G-001
G-002
G-003
G-004
G-005
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
07/30/2010
05/17/2011
10/28/2011
05/16/2013
08/13/2014
09/26/2016
TM
TM
TM
TM
TM
TM
00387
00456
00487
00593
00664
00782
H
H-001
UPDATED BOM REVISION AND NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
05/31/2018
08/30/2018
TS
TM
00951
00992
J
REPLACED 5716149 WITH 5716087, REPLACED
5530097 AND 5535357 WITH 5530465, UPDATED
BOM REVISION
08/09/2022 TM 01436
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600138 HD/HDS/HDSO-14 DRIVE UP RAMP WELDMENT 1 G
2 5716087 HDS-14 APPROACH RAMP EDGE GUARD 1 A
3 5530465 BBSS M6 x 1.0 x 12mm 3 --
NEXT ASSEMBLY
5210743
5245081
5245082
5245083
5245084
5245085
5245095
5245096
5245416
5245417
WHERE USED
D4-12 SERIES
HD-14T
HDS-14 SERIES
HDSO-14 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215104
D4-12, HD/HDS/HDSO-14
DRIVE UP RAMP ASSEMBLY
06/04/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

3685
312
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLY
02/24/2010 AC 00333
C
C-001
UPDATED TITLE TO REFLECT WHERE USED
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
04/23/2010
05/22/2013
AC
TM
00342
00593
D
REPLACED 5570110 WITH 5570129 AND
UPDATED TITLE TO REFLECT WHERE USED
06/08/2015 TM 00683
NEXT ASSEMBLY
5250191
5250250
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5570129 Ø6.4 ID HYDRAULIC HOSE 3630mm* -
2 5550325 FTG NPL Ø1/4 CRIMP x -04 JIC 1 -
3 5550345 FTG ELB Ø1/4 CRIMP x -04 JIC 1 -
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5570025
HD-14T HYD. HOSE
ASSEMBLY Ø6.4 x 3685mm
10/01/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
CA 08/27/2015
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±1.0
0.00 = ±0.25
0.000 = ±0.13
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED.
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
(*)ITEM 1 QTY FOR REFERENCE ONLY 2.

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)

3665
23.0
29.5
55 3610
3 1 2 4
5
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 3583mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
NEXT ASSEMBLY
5250191
REVISION
REV. DESCRIPTION DATE EDITED BY ECO#
A
A-001
PRODUCTION RELEASE
UPDATED NEXT ASSEMBLY
09/29/2008
02/24/2010
AC
AC
00140
00333
B
B-001
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPDATED NEXT ASSEMBLY
06/09/2010
05/22/2013
AC
TM
00366
00593
C ADDED 5535011 AND 5545345 07/17/2020 TM 01174
WHERE USED
HD-14T
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5595139
HD-14T CABLE ASSY
Ø12 x 3665mm ST
09/29/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.

5270
23.0
5215
29.5
55
3 1 2 4
5
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 5188mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
NEXT ASSEMBLY
5250191
REVISION
REV. DESCRIPTION DATE EDITED BY ECO#
A
A-001
PRODUCTION RELEASE
UPDATED NEXT ASSEMBLY
09/29/2008
02/24/2010
AC
AC
00140
00333
B
B-001
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPDATED NEXT ASSEMBLY
06/09/2010
05/22/2013
AC
TM
00366
00593
C ADDED 5535011 AND 5545345 07/17/2020 TM 01174
WHERE USED
HD-14T
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5595184
HD-14T CABLE ASSY
Ø12 x 5270mm ST
09/29/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.

8590
23.0
8535
55.00
29.5
3 1 2
5
4
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5595001 CABLE, LIFTING Ø12 8508mm* -
2 5746020 Ø12 THREADED CABLE CONNECTOR 1 D
3 5746019 Ø12 CABLE END CONNECTOR 1 F
4 5535011 NUT M22 x 2.5 NL 1 -
5 5545345 WASHER M22 x 50mm FLAT 1 -
NEXT ASSEMBLY
5250191
REVISION
REV. DESCRIPTION DATE EDITED BY ECO #
A
A-001
PRODUCTION RELEASE
UPDATED NEXT ASSEMBLY
09/29/2008
02/24/2010
AC
AC
00140
00333
B
B-001
UPDATED TITLE TO DENOTE SINGLE THREADED END
UPDATED NEXT ASSEMBLY
06/09/2010
05/22/2013
AC
TM
00366
00593
C ADDED 5535011 AND 5545345 07/17/2020 TM 01174
WHERE USED
HD-14T
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5595186
HD-14T CABLE ASSY
Ø12 x 8590mm ST
10/01/2008
DO NOT SCALE DRAWING
1:2
SCALE:
THIRD ANGLE PROJECTION
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED
NOTE: UNLESS OTHERWISE SPECIFIED .
FOR ITEM 1 SPECIFICATIONS REFER TO PART SPECIFICATION FORM 1.
LENGTH SHOWN IS AFTER SWAGING 2.
ITEM 1 QTY FOR REFERENCE ONLY 3.
THREAD 5535011 WITH 5545345 ONTO CABLES FOR SHIPMENT 4.