Bend-Pak Quatra XR-12000L User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
XR-12000L
PRODUCT SKU
5175183
DRAWING Nº
5260188
CATEGORY
Mid-Rise Scissor Li
REV
Version C
DATE
09.17.2020

DIMENSIONS ARE IN MM
☺
A
2
1
DETAIL A
SCALE 1 : 30
7
5
49
3
10
6
8
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5245048 XR-12000L LIFT SUPERSTRUCTURE VER C 1 D
2 5250098 XR-12000 SERIES PARTS BOX 1 J
3 5905445 QUATRA LABEL 2 --
4 5905455 RUNWAY STOPS LABEL, ENG-FRE 2 --
5 5905460 DANGER BALANCE LABEL, ENG-FRE 2 --
6 5905653 LABEL; ALI-ALCTV-2017 GOLD LABEL, US; MET LABS 1 --
7 5905178 WARNING/LUBE POINT LABEL 8 --
8 5905179 WARNING/CRUSH POINT LABEL 8 --
9 5930609 BLACK AND YELLOW HAZARD 2'' x 10ft 1 --
10 5905952 SERIAL TAG C 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F UPDATED BOM REVISION 05/30/2019 TM 01088
G UPDATED BOM REVISION 10/15/2019 CA 01134
H
UPDATED LABELS WITH ENGLISH FRENCH,
UPDATED BOM REVISION, REMOVED 5905404
03/31/2020 TM 01152
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5260188
XR-12000L PRODUCTION
LIFT VER C
04/30/2018
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
OR 04/14/2020
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.

89.5in
2274mm
276.7in
7029mm
23.8in
604mm
40.4in
1027mm
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260188
XR-12000L PRODUCTION
LIFT VER C
1:40
SCALE:

75.3in
1912mm
FULL RISE
71.3in
1810mm
TOP LOCK
11.7in
298mm
FULLY LOWERED
34.1in
866mm
LOW LOCK
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260188
XR-12000L PRODUCTION
LIFT VER C
1:40
SCALE:

DIMENSIONS ARE IN MM
☺
A
B
C
D
13
14
20
21
DETAIL A
SCALE 1 : 3
6
7
9
4
8
16
3
DETAIL B
SCALE 1 : 3
5
12 11
10
DETAIL C
SCALE 1 : 3
2
1
DETAIL D
SCALE 1 : 4
15
18
19
22
17
WHERE USED
XR-12000L
XR-12000AL
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5535119 M5 x 30mmL FLOOR ANCHOR 4 --
2 5530312 RHPS M5 x 55mmL 4 --
3 5545005 M6 FLAT WASHER 8 -
4 5535112 NUT M6 x 1.0 8 --
5 5540116 TRUARC Ø12mm 5103-50 8 --
6 5545201 WASHER, M12 SPRING LOCK 4 --
7 5530152 HHB M12 x 1.75 x 30mm 4 --
8 5530047 HHB, M6 x 1 x 30mmL 4 --
9 5540006 SNAP RING TRUARC 5103-100 4 --
10 5530167 HHB M10 x 1.5 x 45mm 4 --
11 5545200 WASHER M10 x Ø18 SL 4 --
12 5535998 NUT M10 x 1.5 4 --
13 5545535 C WASHER SHIM FOR LIFTS 20 --
14 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 1 --
15 5550183 FTG ELB -06 JIC -06L ORB 1 --
16 5530019 HHB M6 x 1 x 16 4 --
17 5550106 FTG ELB -04JIC x 3/8” NPT 1 --
18 5550147 FTG NPL -04 JIC x -04 NPT 2 --
19 5550086 FTG ELB -04 NPT x -04 JIC 2 --
20 5535106 HEX NUT M18 x 2.5 12 --
21 5530264 HHB M18 x 2.5 x 75 12 --
22 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B REMOVED 5550310 & (2) 5550489 07/27/2015 TM 00701
C ADDED 5530264 AND 5535106 10/06/2016 TM 00783
D
ADDED 5580012, REMOVED 5590175, 5550486
AND 5550410, REPLACED 5550489 WITH
5550395
03/18/2020 TM 01152
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5174680
XR-12000 SERIES
PARTS BAG
01/15/2013
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
OR
4/14/2020
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
1
2
REVISION
REV. DESCRIPTION DATE EDITED BY ECO #
A PRODUCTION RELEASE 12/03/2008 GJ 00257
B
B-001
UDPATED BOM REVISION
UPDATED NEXT ASSEMBLIES
10/29/2010
01/23/2013
AC
TM
00399
00570
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5600303 WORK STEP WELDMENT 1 B
2 5746104 STEP ANCHOR 2 A
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
SIZE:
MATERIAL:
B
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJ
5215179
WORK STEP
---
---
12/02/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
MM 02/20/2013

DIMENSIONS ARE IN MM
☺
3
1
2
4
35.085
34.990
50.100
50.070 51.000
- 0.000
+ 0.500
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
F
REPLACED 5600429 WITH 5601245, ADDED
5565058, UPDATED NEXT ASSEMBLIES
04/16/2018 TS 00919
G
REMOVED 5565058, WAS Ø50.030+0.150 NOW
Ø
50.100
50.070
, WAS Ø35.030+0.150 NOW Ø
35.085
34.990
,
UPDATED BOM REVISIONS, UPDATED TITLE TO
REFLECT WHERE USED
02/19/2019 TM 01045
H UPDATED BOM REVISION 06/03/2019 CA 01088
NEXT ASSEMBLY
5215777
5215779
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601245
XR-12000 SHORT WYE ARM WELDMENT REAR
LEFT, 4.0" CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
H
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
AC
5215229
XR-12000 SHORT WYE
ARM ASSEMBLY REAR
LEFT, 4.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.
NOTE: UNLESS OTHERWISE SPECIFIED .

DIMENSIONS ARE IN MM
☺
3
1
2
4
35.085
34.990
50.100
50.070 51.000
- 0.000
+ 0.500
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
ADDED 5565056, UPDATED BOM REVISION
AND NEXT ASSEMBLIES
04/25/2018 TS 00919
J
REMOVED 5565056, WAS Ø50.030+0.150 NOW
Ø
50.100
50.070
, WAS Ø35.030+0.150 NOW Ø
35.085
34.990
,
REMOVED 5565056, UPDATED BOM REVISION,
UPDATED TITLE TO REFLECT WHERE USED
02/21/2019 TM 01045
K UPDATED BOM REVISION 05/28/2019 TM 01088
NEXT ASSEMBLY
5215776
5215778
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5600430
XR-12000 SHORT WYE ARM WELDMENT REAR RIGHT, 4.0" CYLINDER
1 J
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215359
XR-12000 SHORT WYE
ARM ASSEMBLY REAR
RIGHT, 4.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
9
3
16
14
15
10
211
8
7
6
4
5
1
13 12
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C REPLACED 5701273 WITH 5600643 12/13/2011 TM 00491
D
D-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
02/27/2012
01/23/2013
TM
TM
00502
00570
E UPDATED BOM REVISION 02/22/2016 TM 00749
NEXT ASSEMBLY
5250098
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5746119 XR-12000 SERIES TROUGH SHORT HINGE PIN 4 B
2 5746165 XR-12000 SERIES TROUGH LONG HINGE PIN 1 B
3 5701276 XR-12000 SERIES RAMP HOSE TROUGH MOUNT RH 1 B
4 5600643
XR-12000 SERIES BASE HOSE TROUGH MOUNT WELDMENT
RH
1 C
5 5701277 XR-12000 SERIES BOTTOM TROUGH BRACKET COVER 1 B
6 5701278 XR-12000 SERIES BOTTOM TROUGH 1 B
7 5701281 XR-12000 SERIES BOTTOM HOSE TROUGH COVER 1 B
8 5701282 XR-12000 SERIES TOP HOSE TROUGH COVER 1 B
9 5701283 XR-12000 SERIES TOP HINGE BRACKET COVER 1 B
10 5701280 XR-12000 SERIES TOP TROUGH 1 B
11 5540128 E RING Ø3/8" OD TRUARC 5133-37 10 --
12 5545008 WASHER M5 x Ø10 FLAT 10 --
13 5530045 BHPS M5 x 0.8 x 10 10 --
14 5545005 M6 FLAT WASHER 2 --
15 5535112 NUT M6 x 1.0 2 --
16 5530023 BHPS M6 x 1 x 13 2 --
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215364
XR-12000 SERIES
RIGHT SIDE HOSE
TROUGH ASSEMBLY
03/30/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 02/25/2016
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
8
6
5
42
1
12
9
10
11
7
15
14
16
13
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C REPLACED 5701272 WITH 5600642 12/13/2011 TM 00491
D
D-001
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
02/28/2012
01/23/2013
TM
TM
00502
00570
E UPDATED BOM REVISION 02/22/2016 TM 00749
NEXT ASSEMBLY
5250098
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY. REV
1 5701277 XR-12000 SERIES BOTTOM TROUGH BRACKET COVER 1 B
2 5600642
XR-12000 SERIES BASE HOSE TROUGH MOUNT
WELDMENT LH
1 C
3 5701280 XR-12000 SERIES TOP TROUGH 1 B
4 5746119 XR-12000 SERIES TROUGH SHORT HINGE PIN 4 B
5 5746165 XR-12000 SERIES TROUGH LONG HINGE PIN 1 B
6 5540128 E RING Ø3/8" OD TRUARC 5133-37 10 --
7 5701274 XR-12000 SERIES RAMP HOSE TROUGH MOUNT LH 1 B
8 5701278 XR-12000 SERIES BOTTOM TROUGH 1 B
9 5701281 XR-12000 SERIES BOTTOM HOSE TROUGH COVER 1 B
10 5701282 XR-12000 SERIES TOP HOSE TROUGH COVER 1 B
11 5701283 XR-12000 SERIES TOP HINGE BRACKET COVER 1 B
12 5545008 WASHER M5 x Ø10 FLAT 10 --
13 5530045 BHPS M5 x 0.8 x 10 10 --
14 5545005 M6 FLAT WASHER 2 --
15 5530023 BHPS M6 x 1 x 13 2 --
16 5535112 NUT M6 x 1.0 2 --
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215365
XR-12000 SERIES
LEFT SIDE HOSE
TROUGH ASSEMBLY
03/31/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 02/25/2016
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D REPLACED 5550025 WITH 5550028 02/22/2016 TM 00749
E UPDATED BOM REVISION 04/11/2018 TS 00919
F
WAS Ø
35.180
35.030
NOW Ø
35.085
34.990
, UPDATED BOM
REVISION
02/19/2019 TM 01045
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600439
XR-12000 LONG WYE ARM WELDMENT, 5.0"
CYLINDER
1 E
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5550028 FTG ELB GRS M6 x 1 1 --
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
WHERE USED
XR-12000 SERIES
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215366
XR-12000 LONG WYE ARM
ASSEMBLY, 5.0" CYLINDER
03/30/2010
DO NOT SCALE DRAWING
1:10
SCALE:
THIRD ANGLE PROJECTION
CA 3/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
4
3
2
7
6
5
1
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D REPLACED 5550025 WITH 5550028 02/22/2016 TM 00749
E UPDATED BOM REVISION 10/05/2016 TM 00783
F
F-001
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLIES
09/26/2017
07/19/2018
TM
CA
00888
00919
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600445 XR-12000 SERIES SLIDING BASE PLATE WELDMENT 1 D
2 5701302 XR-12000 SERIES BASE PLATE SLIDE BLOCK COVER 2 B
3 5716024 XR-12000 SERIES BASE PLATE SLIDE BLOCK 2 C
4 5761087 XR-12000 SERIES SLIDING BASE PLATE PIVOT HINGE 2 C
5 5550028 FTG ELB GRS M6 x 1 2 --
6 5530076 HHB M12 x 1.75 x 35mm 6 --
7 5545201 WASHER, M12 SPRING LOCK 6 --
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215371
XR-12000 SERIES SLIDING
BASE PLATE ASSEMBLY
03/31/2010
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 7/19/2018
ASSEMBLE ITEMS AS SHOWN 1.

DIMENSIONS ARE IN MM
☺
3
1
51.00
- 0.00
+ 0.50
50.100
50.070
35.085
34.990
NEXT ASSEMBLY
5215776
5215778
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601247
XR-12000 SHORT WYE ARM WELDMENT FRONT RIGHT, 5.0"
CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
C
REPLACED 5600731 WITH 5601247, UPDATED
NEXT ASSEMBLIES
02/12/2018 TS 00919
D
REPLACED (2) 5565056 WITH 5565024,
REMOVED (2) 5565056, WAS Ø50.030+.150
NOW Ø
50.100
50.070
, WAS Ø35.030+.150 NOW Ø
35.085
34.990
,
UPDATED BOM REVISION, UPDATED TITLE TO
REFLECT WHERE USED
02/22/2019 TM 01045
E UPDATED BOM REVISION 05/24/2019 TM 01088
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
E
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215584
XR-12000 SHORT WYE
ARM ASSEMBLY FRONT
RIGHT, 5.0" CYLINDER
01/15/2013
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.

DIMENSIONS ARE IN MM
☺
7
4
1
3
5
2
6
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
A-001
PRODUCTION RELEASE, DERIVED FOM 5215361
UPDATED NEXT ASSEMBLY
09/06/2013
04/17/2015
SH
TM
00619
00701
B
UPDATED TITLE TO REFLECT MARKETING,
UPDATED BOM REVISION
07/19/2018 CA 00919
C REPLACED 5550185 WITH 5550485 10/14/2019 CA 01134
WHERE USED
XR-1200L
XR-12000AL
ITEM NO. PART NUMBER DESCRIPTION QTY. REV
1 5711231 XR-12000L VALVE BLOCK 1 B
2 5550147 FTG NPL -04 JIC x -04 NPT 4 --
3 5550086 FTG ELB -04 NPT x -04 JIC 2 --
4 5550298 FTG NPL -04 NPT x -04 NPT 5 --
5 5550299 FTG ELB -04 NPT L x -06 JIC 1 --
6 5550485 FTG TEE -04 NPT L x -04 NPTF x -04 NPTF 2 --
7 5550181 FTG TEE -04 JIC x -04 JIC x 04 NPT 1 --
NEXT ASSEMBLY
5250098
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
SH
5215628
XR-12000 VALVE BLOCK
ASSEMBLY
09/06/2013
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
CA
10/16/2019
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
DO NOT ASSEMBLE 3.

DIMENSIONS ARE IN MM
☺
2
3
57
4
1
6
8
10
9
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
REPLACED 5530027 WITH 5530021, ADDED
5545023
09/28/2018 TS 01009
C
ADDED 5735678 AND 5565060, REPLACED
5755034 WITH 5601311, REPLACED 5530116
WITH 5530193, 5545141 WITH 5545347,
UPDATED BOM REVISIONS, UPDATED TITLE TO
REFLECT WHERE USED
02/20/2019 TM 01045
D
REPLACED 5565060 WITH 5565056, UPDATED
BOM REVISION
05/28/2019 TM 01088
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5575035 XR-12000 SERIES AIR CYLINDER BRACKET FRONT 1 B
2 5502028 XR-12000L SERIES AIR CYLINDER 1 A
3 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
4 5545347 WASHER, M12 FLAT WASHER 4 --
5 5530021 HHB, M10 x 1.5 x 30 4 --
6 5545023 WASHER M10 SL 4 --
7 5530193 HHB M12 x 1.75 x 50 4 --
8 5601311 XR-12000 SAFETY LOCK LATCH WELDMENT 2 B
9 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
10 5735678 XR-12000 SAFETY LOCK LATCH GUIDE PLATE 2 A
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215765
XR-12000 LOCK
LATCH ASSEMBLY
FRONT, 5.0" CYLINDER
04/19/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
2
35
4
6
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 04/23/2018 TS 00919
B
ADDED 5565055, REPLACED 5575033 WITH
5601309, 5545141 WITH 5545347, UPDATED BOM
REVISION, UPDATED TITLE TO REFLECT WHERE
USED
01/03/2019 TM 01045
C
REPLACED 5601309 WITH 560310, 5565055 WITH
5565056
05/30/2019 TM 01088
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5601249 CYLINDER BRACKET WELDMENT 4.0" 1 B
2 5601310 XR-12000 SAFETY STOP BAR WELDMENT 2 B
3 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
4 5530792 HHB M12 x 1.75 x 45 CL10.9 4 --
5 5545347 WASHER, M12 FLAT WASHER 4 --
6 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215766
XR-12000 CYLINDER LOCK
ASSEMBLY REAR, 4.0" CYLINDER
04/20/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
1
6
5
4
3
2
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE 04/23/2018 TS 00919
B ADDED 5565060, REPLACED 5575033 WITH
5601310, 5530116 WITH 5530792, 5545141
WITH 5545347, UPDATED BOM REVISION,
UPDATED TITLE TO REFLECT WHERE USED
01/03/2019 TM 01045
C UPDATED BUSHING AND BOM REVISION 05/28/2019 TM 01088
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601248 CYLINDER BRACKET WELDMENT 5.0" 1 B
2 5601310 XR-12000 SAFETY STOP BAR WELDMENT 2 B
3 5530792 HHB M12 x 1.75 x 45 CL10.9 4 --
4 5545347 WASHER, M12 FLAT WASHER 4 --
5 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
6 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215767
XR-12000 CYLINDER LOCK
ASSEMBLY FRONT, 5.0" CYLINDER
04/20/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
5
6
4
8
7
2
1
3
10
50.110
49.990
NEXT ASSEMBLY
5215776
5215777
5215778
5215779
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B
REPLACED 5530027 WITH 5530021, ADDED
5545023
09/28/2018 TS 01009
C
ADDED 5735678 AND 5565057, REPLACED
5755034 WITH 5601308, REPLACED 5530116
WITH 5530193, 5545141 WITH 5545347,
UPDATED BOM REVISION, UPDATED TITLE TO
REFLECT WHERE USED
01/03/2019 TM 01045
D
REPLACED 5601308 WITH 5601311, 5565057
WITH 5565056, UPDATED BOM REVISION
05/28/2019 TM 01088
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5575036 XR-12000 SERIES AIR CYLINDER BRACKET REAR 1 B
2 5502028 XR-12000L SERIES AIR CYLINDER 1 A
3 5601311 XR-12000 SAFETY LOCK LATCH WELDMENT 2 --
4 5530193 HHB M12 x 1.75 x 50 4 --
5 5535148 NUT M12 x 1.75 NL CL 8.8 THIN 4 --
6 5545347 WASHER, M12 FLAT WASHER 4 --
7 5530021 HHB, M10 x 1.5 x 30 4 --
8 5545023 WASHER M10 SL 4 --
3 5735678 XR-12000 SAFETY LOCK LATCH GUIDE PLATE 2 A
10 5565056 BUSHING Ø55 x Ø50 x 69 BR 2 --
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215768
XR-12000 LOCK LATCH
ASSEMBLY REAR, 4.0"
CYLINDER
04/19/2018
DO NOT SCALE DRAWING
1:5
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
LIGHT PRESS FIT BUSHINGS 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
3
1
2
4
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
50.100
50.070
35.085
34.990
51.000
- 0.000
+ 0.500
NEXT ASSEMBLY
5215777
5215779
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601254
XR-12000 SHORT WYE ARM WELDMENT FRONT LEFT, 5.0" CYLINDER
1 C
2 5565023 BUSHING Ø39 x Ø34 x 50L BR OI 2 --
3 5565024 BUSHING Ø55 x Ø50 x 46L BR OI 2 --
4 5550025 FTG GRS M6 x 1.0 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215584 02/12/2018 TS 00919
B
REMOVED 5565056, WAS Ø
50.180
50.030
NOW Ø
50.100
50.070
,
WAS Ø
35.180
35.030
NOW Ø
35.085
34.990
, UPDATED BOM
REVISION, UPDATED TITLE TO REFLECT WHERE
USED
02/15/019 TM 01045
C UPDATED BOM REVISION 06/03/2019 CA 01088
WHERE USED
XR-12000 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215773
XR-12000 SHORT WYE
ARM ASSEMBLY FRONT
LEFT, 5.0" CYLINDER
04/25/2018
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
ASSEMBLE ITEMS AS SHOWN 1.
LIGHT PRESS FIT BUSHINGS 2.

DIMENSIONS ARE IN MM
☺
NEXT ASSEMBLY
5245048
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601258 XR-12000L RIGHT HAND RAMP WELDMENT VER C 1 A
2 5600428 XR-12000 SERIES FIXED BASE PLATE WELDMENT 1 D
3 5215371 XR-12000 SERIES SLIDING BASE PLATE ASSEMBLY 1 F
4 5502027 OFFSET CYLINDER ASSEMBLY Ø5.0 x 17.3 RH VER B 1 C
5 5502322 OFFSET CYLINDER ASSEMBLY Ø4.0 x 17.3 1 L
6 5746164 XR-12000 SERIES FRONT LONG WYE BASE PIN 2 B
7 5746163 XR-12000 SERIES WYE HINGE PIN 4 B
8 5746162 XR-12000 SERIES LONG WYE CYLINDER PIN 2 B
9 5746161 XR-12000 SERIES SHORT WYE CYLINDER PIN 2 D
10 5746146 XR-12000 SERIES RAMP SHORT WYE HINGE PIN 2 B
11 5716025 XR-12000 SERIES RAMP SLIDE BLOCK 4 C
12 5746144 XR-12000 SERIES RAMP SLIDE BLOCK PIN 2 B
13 5215584
XR-12000 SHORT WYE ARM ASSEMBLY FRONT RIGHT,
5.0" CYLINDER
1 E
14 5215359
XR-12000 SHORT WYE ARM ASSEMBLY REAR RIGHT,
4.0" CYLINDER
1 K
15 5215366 XR-12000 LONG WYE ARM ASSEMBLY, 5.0" CYLINDER 1 F
16 5215823 XR-12000 LONG WYE ARM ASSEMBLY, 4.0" CYLINDER 1 B
17 5540127 R RING Ø2.0" OD TRUARC 5160-200 12 --
18 5530108 SSS M8 x 1.25 x 12 24 --
19 5550025 FTG GRS M6 x 1.0 4 --
20 5550028 FTG ELB GRS M6 x 1 4 --
21 5550147 FTG NPL -04 JIC x -04 NPT 3 --
22 5570039
XR-12000 SERIES HYDRAULIC HOSE ASSY Ø6.4 x 1448mm SB
1 E
23 5570032
HOSE ASSEMBLY Ø6.4 x 5000mm, SB
1 E
24 5570004
XR-12000 SERIES HYDRAULIC HOSE ASSY Ø6.4 x 6147mm DS
1 C
25 5570208
XR-12000 SERIES HYDRAULIC HOSE ASSY Ø6.4 x 11340mm SB
1 B
26 5550310 FTG TEE -04JIC -04JIC -04JIC 1 --
27 5550489 FTG TEE 1/4-1/4-1/4 TUBE INS 1 --
28 5570795 1/4" POLY-FLO TUBING 7500mm --
29 5215768
XR-12000 LOCK LATCH ASSEMBLY REAR, 4.0" CYLINDER
1 D
30 5215766
XR-12000 CYLINDER LOCK ASSEMBLY REAR, 4.0" CYLINDER
1 C
31 5215767
XR-12000 CYLINDER LOCK ASSEMBLY FRONT, 5.0" CYLINDER
1 C
32 5215765
XR-12000 LOCK LATCH ASSEMBLY FRONT, 5.0" CYLINDER
1 D
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
B UPDATED BOM REVISIONS 09/28/2018 TS 01009
C
ADDED (1) 5550147, REMOVED 5550091,
5215771, AND 5215772, REPLACED (1) 5215366
WITH 5215823, 5502355 WITH 5502322, UPDATED
HOSE ROUTING TO REFLECT SAMPLE, UPDATED
BOM REVISIONS
01/14/2019 TM 01045
D UPDATED BOM REVISIONS 05/30/2019 TM 01088
WHERE USED
XR-12000L
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
D
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TS
5215778
XR-12000L COMPLETE
RIGHT RAMP ASSEMBLY
VER C
04/27/2018
DO NOT SCALE DRAWING
1:35
SCALE:
THIRD ANGLE PROJECTION
CA 6/14/2019
HOSES AND AIR LINE MUST BE ROUTED BEFORE PACKAGING 1.
HOSES AND AIRLINE SHOWN IN REPRESENTATIONAL FORM 2.
COIL EXCESS HOSE INSIDE RAMP FOR SHIPMENT 3.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 4.
ASSEMBLE ITEMS AS SHOWN 5.