Bend-Pak HDSO-14P User manual

BendPak, Inc. Corporate Oce
1645 Lemonwood Drive
Santa Paula, CA 93060 USA
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Customer Service Desk / Warranty
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
customerservic[email protected]
Parts Orders
Customer Service Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
Domestic Sales & Service
USA Sales Representatives
Oce Tel: [phone]
Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
[email protected]om
International Sales & Service
Oce Tel: [phone]
Exports Dept: 1-805-933-9970 EXT. 192
Ext. Toll Free US/Canada: 1-800-253-2363
Fax: [phone]
bpkex[email protected]om
Service Manual
SERVICE PARTS & DIAGRAMS
This guide is a troubleshooting reference used for maintaining and
servicing your Bend Pak product. It provides comprehensive information
on identifying serviceable parts and components and assists in
troubleshooting problems and performing assembly /disassembly
procedures.
BENDPAK
HDSO14P
PRODUCT SKU
5175152
DRAWING Nº
5260583
CATEGORY
Four Post Li
REV
Version W
DATE
08.29.2022

DIMENSIONS ARE IN MM
☺
1
2
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5245417 HDSO-14P LIFT SUPERSTRUCTURE 1 Q
2 5250058 HDSO-14P PARTS BOX 1 J
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
U
REPLACED LABELS WITH COLORS &
GRAPHICS NOTE
09/27/2021 TM 01344
V UPDATED BOM REVISION 05/24/2022 TM 01414
W
WAS 120.6 NOW 102.9, UPDATED BOM
REVISION
08/11/2022 TM 01436
SHEET 1 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5260583
HDSO-14P PRODUCTION
LIFT VER D (CE CERT)
09/23/2016
DO NOT SCALE DRAWING
1:40
SCALE:
THIRD ANGLE PROJECTION
OR 08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 3.

5054.0mm
198.976in
508.0mm
20.000in
3638.0mm
143.228in
215.413in
5471.5mm
120.000in
3048.0mm
42.126in MAX
1070.0mm MAX
244.432in
6208.6mm
123.110in
3127.0mm
18.996in
482.5mm
17.618in
447.5mm
130.079in
3304.0mm
2338.0mm
92.047in
1970.0mm
77.559in
2623.0mm
103.268in
48.355in
1228.2mm
3.504in MAX
89.0mm MAX
4.090in
103.9mm
6.732in
171.0mm
3.740in MAX
95.0mm MAX
70.827in
1799.0mm
A
B
68.740in
1746.0mm
DRIVE THRU
FRONT VIEW
4.051in
102.9mm
DETAIL A
SCALE 1 : 10
4.016in
102.0mm
DETAIL B
SCALE 1 : 10
SHEET 2 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260583
HDSO-14P PRODUCTION
LIFT VER D (CE CERT)
1:55
SCALE:

77.559in
1970.0mm
RAISED
76.299in
1938.0mm
TOP LOCK
20.630in
524.0mm
LOWEST LOCK
7.717in
196.0mm
LOWERED
DIMENSIONS SHOWN ARE WITH THE LOCK LADDERS ADJUSTED ALL THE WAY UP 1.
SHEET 3 OF 3
REV
DWG. NO.
A
SIZE
TITLE:
W
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5260583
HDSO-14P PRODUCTION
LIFT VER D (CE CERT)
1:30
SCALE:

DIMENSIONS ARE IN MM
☺
B
C
12
9
45
3
2
11
1
6
13
10
DETAIL A
SCALE 1 : 2
16
15
14
DETAIL B
SCALE 1 : 20
17
18
20
19
DETAIL C
SCALE 1 : 22
22
21
NEXT ASSEMBLY
5260583
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5216144 HDSO-14 CROSSTUBE ASSEMBLY 1 A
2 5215097 HDSO-14P POWER SIDE RAMP ASSEMBLY 1 U
3 5215298 HDSO-14P OFF SIDE RAMP ASSEMBLY 1 K
4 5216143 HDSO-14 RIGHT FRONT CARRIAGE ASSEMBLY 1 A
5 5216142 HDSO-14 LEFT FRONT CARRIAGE ASSEMBLY 1 A
6 5600915 HDS/HDSO-14 SAFETY LADDER WELDMENT 2 B
7 5736988 HDSO-14 SAFETY LADDER 1 C
8 5530196 THREADED ROD M20 x 2.5 x 175 1 A
9 5601112 HDSO-14 SAFETY LADDER WELDMENT 1 C
10 5620605 HDS-14 POST WELDMENT 1 A
11 5620606 HDS-14 POWER SIDE POST WELDMENT 1 A
12 5601150 HDSO-14 POST WELDMENT 2 A
13 5215104 D4-12, HD/HDS/HDSO-14 DRIVE UP RAMP ASSEMBLY 2 E
14 5535303 NUT M20 x 2.5 4 -
15 5545343 WASHER, M20 FLAT 4 -
16 5535017 NUT M20 x 2.5 NL 4 -
17 5746384 HDS-14 SPACER, SAFETY LADDER, 23.5mm LG 2 A
18 5535013 NUT M10 x 1.5 NL 4 -
19 5545341 WASHER M10 x Ø20 FLAT 8 -
20 5530217 HHB M10 x 1.5 x 58 2 A
21 5746382 D4-12, HDS-14 SPACER, SAFETY LADDER, 15mm LG 2 A
22 5530167 HHB M10 x 1.5 x 45mm 2 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
N UPDATED BOM REVISION 08/23/2021 CA 01322
P
REPLACED 5215605 WITH 5216144, 5215469
WITH 5216143, AND 5215464 WITH 5216142
05/24/2022 TM 01414
Q UPDATED BOM REVISION 08/11/2022 TM 01436
WHERE USED
HDSO-14P
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
Q
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5245417
HDSO-14P LIFT
SUPERSTRUCTURE
09/23/2016
DO NOT SCALE DRAWING
1:50
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.
THREAD M20 HARDWARE ONTO LADDER BOLTS AS SHOWN 4.

DIMENSIONS ARE IN MM
☺
1
8
7
6
2
5
4
9
10
3
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
R UPDATED BOM REVISION 03/15/2018 TM 00927
T UPDATED BOM REVISION 11/05/2020 CA 01227
U
REPLACED (1) 5600261 WITH 5600260,
UPDATED BOM REVISION
08/23/2021 CA 01322
WHERE USED
HDSO-14P
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5600283 HDSO-14P POWER SIDE RAMP WELDMENT 1 E
2 5215664 HDS/HDSO-14 CYLINDER FLANGE ARM ASSEMBLY 1 C
3 5215015 HDS-14 SERIES RAMP SHEAVE ASSEMBLY 5 C
4 5600260 HDS/HDSO-14 SHEAVE PIN WELDMENT 2 C
5 5736821 HDS-14 CABLE RETAINER PLATE 1 A
6 5502110 CYLINDER ASSEMBLY Ø3.5 x 70 1 K
7 5755101 HDSO-14 OPEN END SHEAVE SPACER 1 B
8 5716012 HDSO-14 SERIES UHMW SHEAVE SPACER 1 B
9 5545341 WASHER M10 x Ø20 FLAT 2 --
10 5530281 HHB M10 x 1.5 x 10 2 --
NEXT ASSEMBLY
5245417
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
U
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
GJZ
5215097
HDSO-14P POWER
SIDE RAMP ASSEMBLY
11/17/2008
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
OR 09/15/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
VERIFY CYLINDER PORTS AND CAPPED WITH 3/8" NPT STEEL PLUGS 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

208.189in
5288.0mm
21.496in
546.0mm
CYLINDER PORTS
ON THIS SIDE
7.693in
195.4mm
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
U
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5215097
HDSO-14P POWER
SIDE RAMP ASSEMBLY
1:15
SCALE:

DIMENSIONS ARE IN MM
☺
1
7
6
4
2
3
8
9
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
H
H-001
REMOVED 5550026
UPDATED NEXT ASSEMBLY
10/19/2015
09/26/2016
TM
TM
00724
00782
J UPDATED BOM REVISION 12/27/2017 TM 00909
K
REPLACED (1) 5600261 WITH 5600260,
UPDATED BOM REVISION
08/23/2021 CA 01322
WHERE USED
HDSO-14P
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600282 HDSO-14P OFF SIDE RAMP WELDMENT 1 E
2 5600260 HDS/HDSO-14 SHEAVE PIN WELDMENT 2 C
3 5215015 HDS-14 SERIES RAMP SHEAVE ASSEMBLY 2 C
4 5755101 HDSO-14 OPEN END SHEAVE SPACER 1 B
5 5755102 HDSO-14 OFF SIDE BOTTOM SHEAVE SPACER 1 A
6 5755103 HDSO-14 OFF SIDE TOP SHEAVE SPACER 1 A
7 5716012 HDSO-14 SERIES UHMW SHEAVE SPACER 1 B
8 5545341 WASHER M10 x Ø20 FLAT 2 --
9 5530281 HHB M10 x 1.5 x 10 2 --
NEXT ASSEMBLY
5245417
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
K
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215298
HDSO-14P OFF SIDE
RAMP ASSEMBLY
06/19/2009
DO NOT SCALE DRAWING
1:22
SCALE:
THIRD ANGLE PROJECTION
OR
09/15/2021
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

DIMENSIONS ARE IN MM
☺
ITEM
NO
PART
NUMBER
DESCRIPTION QTY REV
1 5601817 HDSO-14 SHORT CROSSTUBE LEFT WELDMENT 1 A
2 5746080 HDSO-14 SAFETY PIN 1 D
3 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 1 F
4 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 1 C
5 5716031 HDSO-14 POLYETHYLENE SLIDE BLOCK 4 D
6 5215013 HDS-14 CROSSTUBE SHEAVE ASSEMBLY 1 B
7 5601110 HDSO-14 LEFT CARRIAGE WELDMENT 1 E
8 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
9 5540275 E RING Ø25mm OD DIN 6799 0250 4 -
10 5530694 HHB M6 x 1.0 x 75 3 -
11 5545005 WASHER, M6 x 12mm FLAT 2 -
12 5535112 NUT M6 x 1.0 3 -
13 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 1 A
14 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 -
15 5505625 FEMALE ROD END M6 x 33 1 -
16 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 1 -
17 5550087 FTG ELB -04 COMP x -02 NPT 1 -
18 5530756 HHB M6 x 1.0 x 25mm 1 -
19 5505030 PUSH-ON CLIP Ø10mm SS 1 -
20 5530090 SSS M20 x 2.5 x 50L 1 -
21 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 1 C
22 5716019 HDSO-14 BUTTON SLIDE 2 B
23 5716022 HDSO-14 CARRIAGE ROLLER BEARING 2 A
24 5755136 AIR CYLINDER SPACER 12mm 1 A
25 5755137 AIR CYLINDER SPACER 25mm 1 A
26 5535357 NUT M6 x 1.0 NL 1 -
27 5716038 HDSO-14 POLYETHYLENE SLIDE BLOCK, TOP 2 B
28 5716039 HDSO-14 POLYETHYLENE SLIDE BLOCK, BOTTOM 2 B
29 5755159 HDSO-14 CROSSTUBE SPACER Ø16 x Ø10 x 52 1 A
30 5535230 NUT 1/4-28 JN 1 -
NEXT ASSEMBLY
5245416
5245417
WHERE USED
HDSO-14P
HDSO-14AX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215464 05/11/2022 TM 01414
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216142
HDSO-14 LEFT FRONT
CARRIAGE ASSEMBLY
05/11/2022
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 2.
ASSEMBLE ITEMS AS SHOWN 3.

A
9
2
7
8
1
6
20
14
23
5
27
28
29
10
DETAIL A
SCALE 1 : 4
15
11
12
17
13
18
21
19
43
25
24
16
26
22
30
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5216142
HDSO-14 LEFT FRONT
CARRIAGE ASSEMBLY
1:10
SCALE:

DIMENSIONS ARE IN MM
☺
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601818 HDSO-14 SHORT CROSSTUBE RIGHT WELDMENT 1 A
2 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 1 F
3 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 1 C
4 5716031 HDSO-14 POLYETHYLENE SLIDE BLOCK 4 D
5 5215013 HDS-14 CROSSTUBE SHEAVE ASSEMBLY 1 B
6 5601111 HDSO-14 RIGHT CARRIAGE WELDMENT 1 E
7 5746080 HDSO-14 SAFETY PIN 1 D
8 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
9 5540275 E RING Ø25mm OD DIN 6799 0250 4 -
10 5530694 HHB M6 x 1.0 x 75 3 -
11 5545005 WASHER, M6 x 12mm FLAT 2 -
12 5535112 NUT M6 x 1.0 1 -
13 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 1 A
14 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 -
15 5505625 FEMALE ROD END M6 x 33 1 -
16 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 1 -
17 5550087 FTG ELB -04 COMP x -02 NPT 1 -
18 5505030 PUSH-ON CLIP Ø10mm SS 1 -
19 5530090 SSS M20 x 2.5 x 50L 1 -
20 5530756 HHB M6 x 1.0 x 25mm 1 -
21 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 1 C
22 5716019 HDSO-14 BUTTON SLIDE 2 B
23 5716022 HDSO-14 CARRIAGE ROLLER BEARING 2 A
24 5755136 AIR CYLINDER SPACER 12mm 1 A
25 5755137 AIR CYLINDER SPACER 25mm 1 A
26 5535357 NUT M6 x 1.0 NL 3 -
27 5716039 HDSO-14 POLYETHYLENE SLIDE BLOCK, BOTTOM 2 B
28 5716038 HDSO-14 POLYETHYLENE SLIDE BLOCK, TOP 2 B
29 5755159 HDSO-14 CROSSTUBE SPACER Ø16 x Ø10 x 52 1 A
30 5535230 NUT 1/4-28 JN 1 -
NEXT ASSEMBLY
5245416
5245417
WHERE USED
HDSO-14P
HDSO-14AX
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215469 05/11/2022 TM 01414
SHEET 1 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216143
HDSO-14 RIGHT FRONT
CARRIAGE ASSEMBLY
05/11/2022
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

A
6
9
8
5
14
1
12
22
19
28
4
27
23
29
DETAIL A
SCALE 1 : 4
10
13
17
18
3
20
11
15
16
21
7
2
24
25
26
30
SHEET 2 OF 2
REV
DWG. NO.
A
SIZE
TITLE:
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
5216143
HDSO-14 RIGHT FRONT
CARRIAGE ASSEMBLY
1:12
SCALE:

DIMENSIONS ARE IN MM
☺
1
24
6
DETAIL A
SCALE 1 : 6
3
15
19
5
18
13
20
16
10
8
9
12
7
14
2
17
4
11
21
22
23
25
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY REV
1 5601816 HDSO-14 CROSSTUBE WELDMENT 1 A
2 5215013 HDS-14 CROSSTUBE SHEAVE ASSEMBLY 2 B
3 5575380 D4-12, HD/HDS/HDSO-14 SAFETY ROLLER 2 C
4 5600044 4 POST LIGHT DUTY SLACK SAFETY WELDMENT 2 F
5 5600173 D4-12, HD/HDS/HDSO-14 SHEAVE PIN WELDMENT 2 G
6 5716005
D4-12, HD-7/7500/9/14/HDSO-14 POLYETHYLENE SLIDE BLOCK
8 M
7 5746008 D4-12, HD/HDS-7/7500/9/14, HDSO-14 SAFETY PIN 2 D
8 5600760 D4-12, HD/HDS LIGHT DUTY SAFETY WELDMENT 2 C
9 5540275 E RING Ø25mm OD DIN 6799 0250 8 -
10 5502195 AIR CYLINDER, Ø19mm x 25 STROKE 2 -
11 5530005 HHB M6 x 1 x 70 6 -
12 5545005 WASHER, M6 x 12mm FLAT 4 -
13 5535112 NUT M6 x 1.0 4 -
14 5505030 PUSH-ON CLIP Ø10mm SS 2 -
15 5540065 SPRING Ø13mm x 90mm, SLACK SAFETY 2 A
16 5540002 E RING Ø1.375" OD TRUARC X5133-137 2 -
17 5505625 FEMALE ROD END M6 x 33 2 -
18 5550087 FTG ELB -04 COMP x -02 NPT 2 -
19 5530756 HHB M6 x 1.0 x 25mm 2 -
20 5545032 WASHER M36 x 66 FLAT 2 -
21 5755136 AIR CYLINDER SPACER 12mm 2 A
22 5755137 AIR CYLINDER SPACER 25mm 2 A
23 5535357 NUT M6 x 1.0 NL 4 -
24 5755157 D4-12, HD-7/7500/9 CROSSTUBE SPACER Ø16 x Ø10 x 50 2 A
25 5535230 NUT 1/4-28 JN 2 -
NEXT ASSEMBLY
5245416
5245417
WHERE USED
HDSO-14P
HDSO-14X
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DERIVED FROM 5215605 04/29/2022 TM 01414
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216144
HDSO-14 CROSSTUBE
ASSEMBLY
04/29/2022
DO NOT SCALE DRAWING
1:25
SCALE:
THIRD ANGLE PROJECTION
GREASE PINS PRIOR TO ASSEMBLY 1.
ASSEMBLE ITEMS AS SHOWN 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.

DIMENSIONS ARE IN MM
☺
16
15
3
18 21
10
11
12
13
9
14
7
6
4
5
8
17
21
20
22
19 23
WHERE USED
HDSO-14P
ITEM
NO.
PART
NUMBER
DESCRIPTION QTY. REV
1 5174099 HDSO-14 PARTS BAG 1 F
2 5600406 HD/HDS-14 TOP PLATE WELDMENT 2 C
3 5505009 D4-12, HD/HDS-14 DRIVE UP RAMP PIN 2 D
4 5700029 HD-SERIES FLEX TUBE BRACKET PLATE 1 F
5 5700033 HD-SERIES FLEX TUBE ANGLE 1 E
6 5715003 POWER UNIT VIBRATION DAMPENER 1 B
7 5215096 PUSH BUTTON AIR ASSEMBLY 1 G
8 5216139 FLEX TUBE KIT, UP TO 2000mm 1 A
9 5570871
HYDRAULIC HOSE ASSEMBLY Ø6.4 x 4166mm
1 B
10 5595065
HDS/HDSO-14 CABLE ASSEMBLY Ø12 x 4100mm ST
1 E
11 5595066
HDS/HDSO-14 CABLE ASSEMBLY Ø12 x 5732mm ST
1 E
12 5595089
HDSO-14P/AX CABLE ASSEMBLY Ø12 x 11302mm ST
1 D
13 5595931
HDSO-14P/AX CABLE ASSEMBLY Ø12 x 9639mm ST
1 C
14 5570795 1/4" POLY-FLO TUBING 24000mm* --
15 5700072 WHEEL CHOCK 2 B
16 5700032 TIRE STOP 2 D
17 5530456 AB 3/4" x 4 - 3/4" 20 --
18 5600407 HDSO-14 TOP PLATE WELDMENT 2 B
19 5900001 INSTALLATION MANUAL HDSO-14P/AX 1 --
20 5716629 HDS-14 CROSSTUBE COVER, PLASTIC 2 A
21 5716631 HDSO-14 CARRIAGE CLOSEOUT COVER, PLASTIC 2 A
22 5210241 4 POST LIGHT DUTY CE PARTS BAG 1 A
23 5930195 ANTI-SLIP TAPE, 6” x 24ft 1 --
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
ADDED 5210241, REMOVED 5535011 AND
5545345, UPDATED BOM REVISIONS
07/21/2020 TM 01174
H UPDATED BOM REVISION 08/19/2021 CA 01322
J
ADDED 5930195, REPLACED 5570050 WITH
5216139
05/04/2022 TM
01414
PRE A
NEXT ASSEMBLY
5260583
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5250058
HDSO-14P PARTS BOX
09/23/2016
DO NOT SCALE DRAWING
1:20
SCALE:
THIRD ANGLE PROJECTION
OR 05/09/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
HOSES AND CABLES SHOWN IN REPRESENTATIONAL FORM ONLY 2.
(*)LENGTH FOR REFERENCE ONLY 3.

DIMENSIONS ARE IN MM
☺
22
23
DETAIL A
SCALE 1 : 4
1
21
DETAIL B
SCALE 1 : 4
17
16
DETAIL C
SCALE 1 : 8
13
14
6
5
4
12
DETAIL D
SCALE 1 : 12
10
8
9
7
15
DETAIL E
SCALE 1 : 4
11
DETAIL F
SCALE 1 : 4
19
18 20
DETAIL H
SCALE 1 : 2
3 2
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
D
D-001
REPLACED 5550004 WITH 5550089, 5550489
WITH 5550395, UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
10/29/2013
09/26/2016
TM
TM
00593
00782
E ADDED 5550025, 5550026, AND 5580012 12/11/2019 CA 01120
F REMOVED 5550025 AND 5550026 08/19/2021 CA 01322
WHERE USED
HDSO-14 SERIES
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5530767 HHB M10 x 1.5 x 70 4 -
2 5530756 HHB M6 x 1.0 x 25mm 4 -
3 5535357 NUT M6 x 1.0 NL 4 -
4 5535001 NUT M8 x 1.25 NL 4 -
5 5545340 WASHER M8 x24 FLAT 4 -
6 5530010 HHB M8 x 1.25 x 25mm ZPL 4 -
7 5530009 HHB M12 x 1.75 x 90 CL8.8 8 -
8 5545201 WASHER, M12 SPRING LOCK 8 -
9 5545347 WASHER, M12 FLAT WASHER 8 -
10 5535354 NUT, M12 x1.75 8 -
11 5550106 FTG ELB -04JIC x 3/8” NPT 1 -
12 5550395 FTG TEE -04 COMP x -04 COMP x -04 COMP 3 -
13 5550089 FTG ELB -04 COMP x -06 NPT 2 -
14 5550008 FTG ELB -04 JIC -06L ORB 1 -
15 5505032 ROTOR CLIP Ø18mm SS 4 -
16 5530107 HHB M14 x 2.0 x 40 4 -
17 5535107 NUT M14 x 2.0 NL 4 -
18 5545009 WASHER, M4 x 9mm FLAT 2 -
19 5530008 SHCS M4 x 0.7 x 12 BOC 2 -
20 5535010 NUT M4 X 0.7 NL 2 -
21 5545027 WASHER M12 x Ø37 4 -
22 5545535 C WASHER SHIM FOR LIFTS 20 -
23 5580012 LIQUID PTFE THREAD SEALANT 50ml 1 -
NEXT ASSEMBLY
5250058
5250059
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
F
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5174099
HDSO-14 PARTS BAG
08/08/2008
DO NOT SCALE DRAWING
1:30
SCALE:
THIRD ANGLE PROJECTION
OR 09/21/2021
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.

DIMENSIONS ARE IN MM
☺
1
3
2
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A
PRODUCTION RELEASE, DERIVED FROM
5570050, 5570052, 5570239
05/05/2022 TM
01414
PRE A
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5570053 PE FLEX TUBE Ø34.5xØ29 2100mm* -
2 5555555 WQG1-M36/AD34.5 CONNECTOR 2 -
3 5535050 PLASTIC NUT M36 x 2 2 -
WHERE USED
D4-12 SERIES
HD-14T
HD-7500 SERIES
HD-7W
HD-7P
HD-9 SERIES
HD-973 SERIES
HDS-14 SERIES
HDSO-14 SERIES
HDS-18/27/40 SERIES
NEXT ASSEMBLY
5250058 5250175 5250289
5250059 5250184 5250290
5250079 5250185 5250294
5250081 5250187 5250295
5250082 5250188 5250336
5250143 5250189 5250337
5250144 5250191 5250338
5250164 5250193 5250349
5250167 5250194 5250364
5250168 5250195
5250169 5250278
5250172 5250286
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
A
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5216139
FLEX TUBE KIT,
UP TO 2000mm
05/05/2022
DO NOT SCALE DRAWING
1:3
SCALE:
THIRD ANGLE PROJECTION
OR 05/10/2022
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
SHOWN IN REPRESENTATIONAL FORM ONLY 2.
(*)LENGTH FOR REFERENCE ONLY

DIMENSIONS ARE IN MM
☺
3
1
6
2
5
4
7
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
E REPLACED 5550481 WITH 5550087 10/29/2013 TM 00593
F
REPLACED 5590240 WITH 5590175, UPDATED
NEXT ASSEMBLIES
05/05/2015 MR 00683
G
SWITCHED POSITIONS OF 5550087 AND
5550486, UPDATED NEXT ASSEMBLY
06/16/2016 TS 00765
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5700031 ZERO ANGLE MOUNTING BRACKET 1 C
2 5590175 PUSH BUTTON AIR VALVE 1 -
3 5530043 SHCS M3 x 0.5 x 30 2 -
4 5545024 WASHER, M3 x 9mm FLAT 2 -
5 5535020 NUT M3 x 0.5, NL CL8 2 -
6 5550087 FTG ELB -04 COMP x -02 NPT 1 -
7 5550486 FTG NPL -02 NPT x -04 F NPT 1 -
NEXT ASSEMBLY
D4-12 SERIES
HD SERIES
HDS SERIES
HDSO SERIES
PL-12000DP
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
G
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
AC
5215096
PUSH BUTTON AIR
ASSEMBLY
03/14/2008
DO NOT SCALE DRAWING
2:3
SCALE:
THIRD ANGLE PROJECTION
CA 09/02/2015
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.

DIMENSIONS ARE IN MM
☺
ISOMETRIC VIEW
FOR REFERENCE ONLY
DO NOT SCALE
2
1
3
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
G
G-001
G-002
G-003
G-004
G-005
UPDATED BOM REVISION
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLY
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLIES
07/30/2010
05/17/2011
10/28/2011
05/16/2013
08/13/2014
09/26/2016
TM
TM
TM
TM
TM
TM
00387
00456
00487
00593
00664
00782
H
H-001
UPDATED BOM REVISION AND NEXT ASSEMBLIES
UPDATED NEXT ASSEMBLY
05/31/2018
08/30/2018
TS
TM
00951
00992
J
REPLACED 5716149 WITH 5716087, REPLACED
5530097 AND 5535357 WITH 5530465, UPDATED
BOM REVISION
08/09/2022 TM 01436
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600138 HD/HDS/HDSO-14 DRIVE UP RAMP WELDMENT 1 G
2 5716087 HDS-14 APPROACH RAMP EDGE GUARD 1 A
3 5530465 BBSS M6 x 1.0 x 12mm 3 --
NEXT ASSEMBLY
5210743
5245081
5245082
5245083
5245084
5245085
5245095
5245096
5245416
5245417
WHERE USED
D4-12 SERIES
HD-14T
HDS-14 SERIES
HDSO-14 SERIES
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
J
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED .
TM
5215104
D4-12, HD/HDS/HDSO-14
DRIVE UP RAMP ASSEMBLY
06/04/2008
DO NOT SCALE DRAWING
1:8
SCALE:
THIRD ANGLE PROJECTION
OR
08/16/2022
REFER TO MODEL FOR ADDITIONAL INFORMATION 1.
SEE COLORS & GRAPHICS FOR LABEL PLACEMENT 2.
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 3.
ASSEMBLE ITEMS AS SHOWN 4.

A
1
DETAIL A
SCALE 1 : 3
4
5
2
3
NEXT ASSEMBLY
5210228
5215072
5215097
5215241
ITEM NO PART NUMBER DESCRIPTION QTY REV
1 5600924 HDS/HDSO-14 CYLINDER FLANGE ARM WELDMENT 1 A
2 5716006 HD/HDS/HDSO-14 CYLINDER FLANGE ARM SLIDE 2 F
3 5530247 FHPS M6 x 1 x 40 4 -
4 5535112 NUT M6 x 1.0 4 -
5 5545005 M6 FLAT WASHER 4 -
REVISION
REV DESCRIPTION DATE EDITED BY ECO#
A PRODUCTION RELEASE, DREIVED FROM 5215033 08/04/2014 TM 00664
B
REPLACED 5530077 WITH 5530247, UPDATED
BOM REVISION
05/01/2017 TS 00829
C UPDATED BOM REVISION AND NEXT ASSSEMBLY 07/07/2017 TM 00843
WHERE USED
HDS-14
HDS-14X
HDSO-14
SHEET 1 OF 1
REV
DWG. NO.
A
SIZE
TITLE:
NAME
DATE
CHECKED
DRAWN
C
1645 LEMONWOOD DR.
SANTA PAULA, CA 93060
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS DRAWING IS
THE SOLE PROPERTY OF BENDPAK INC. ANY
REPRODUCTION IN PART OR AS A WHOLE WITHOUT
THE WRITTEN PERMISSION OF BENDPAK INC. IS
PROHIBITED.
NOTE: UNLESS OTHERWISE SPECIFIED.
TM
5215664
HDS/HDSO-14 CYLINDER
FLANGE ARM ASSEMBLY
08/04/2014
DO NOT SCALE DRAWING
1:4
SCALE:
THIRD ANGLE PROJECTION
AW 7/27/2017
SEE SHIPPING INSTRUCTIONS FOR FINAL PACKAGING 1.
ASSEMBLE ITEMS AS SHOWN 2.
DIMENSIONS ARE IN MM
TOLERANCES:
0. = ±1.5
0.0 = ±0.5
ANGULAR: 0. =
2
°
SURFACE FINISH 1.6 ISO Ra µm
FOR MACHINED SURFACES
UNLESS OTHERWISE SPECIFIED

PART SPECIFICATION FORM
ACP
BENDPAK Number:
5570129
MRP Description:
¼” HYDRAULIC HOSE 31 CL-0400X
Date:
05/24/2018
ECO :
00950
1. Engineering Specification
Application:
¼” HYDRAULIC HOSE
Detailed Description:
ONE or TWO BRAID STEEL WIRE HYDRAULIC HOSE
SIZE: 1/4” / 6mm I.D. MIN
0.53” / 13.4mm O.D. MAX
SPECS: 5700PSI OR 393 BAR WORKING PRESSURE MINIMUM
17100PSI OR 1179 BAR MINIMUM BURST PRESSURE MINIMUM
3” / 80mm MIN BEND RADIUS
COLOR: BLACK
ADDITIONAL CONTACT INFORMATION:
Xin Yurong
Shandong Ningjin High Energy Hose Co., Ltd.
Tel: [phone]
No. 7, Taishan Rd., Industrial Park, Ningjin County, Shandong, China
Approved Vendor
Vendor Part #
Contact #
AUTHORIZED
COMPONENT PROVIDER
1) Ningjin Hydraulic Hose
Co.
5570129
[phone]
X
2)
OR BENDPAK ENGINEERING APPROVED EQUIVALENT
2. Vendor Information (Or for Reference)