Beok Controls TGR-85 User manual

TGR-85 THERMOSTAT USER GUIDE
THIS THERMOSTAT IS SUITABLE FOR WATER HEATING,
ELECTRIC HEATING AND GAS BOILER
TGR-85 THERMOSTAT USER GUIDE
Thank you for your trust and support.By adopting higher-end technology and
more perfect technology,your new thermostat will provide you with the right
temperature environment every day in the future,making your life more
comfortable and your living environment more stylish and beautiful.For
detailed instructions on the installation and use of this thermostat,please read
this manual carefully.Please contact a professional to install the thermostat for
you and install and use the product to the extent permitted by law
Intelligent digital temperature controller is a floor heating system suitable for
room temperature control and household temperature control.It controls the
operating state of the floor heating equipment by comparing the ambient
temperature with the set temperature,which improves comfort and achieves
energy saving.This digital temperature controller adopts microcomputer
control technology and is equipped with full-screen display touch buttons,
which is elegant in design and easy to use.The thermostat has manual
automatic,programmable and state memory functions.
01
Welcome
Application
TGR-85 THERMOSTAT USER GUIDE
User Notes
1.Please read this manual carefully. Improper operation may damage the
product or cause dangerous conditions.
2.The installation personnel must be well-trained and experienced service
technicians.
3.After installation, please read this manual carefully and operate the product
according to the instructions.
Caution: Risk of electric shock or equipment damage.
Wiring Diagram
Note: WP for water heating; EP for electric heating; WPB for gas boiler
03
TGR-85 THERMOSTAT USER GUIDE
Installation procedure
This product is installed with a standard 86 control switch (in compliance with
1.Turn the fixator so that the arrow is
aligned with the display screen.Remove
2.Remove the mounting plate in this direction
4.Insert the thermostat into the mounting plate
from top to bottom and reuse ,The screwdriver will
rotate the fixator 180 degrees to complete the installation.
04
European regulations)
the mounting plate
3.Fix the mounting plate on
the cassette with a screw
TGR-85 THERMOSTAT USER GUIDE
Product packaging
Thermostat host---------------
Qualification certificate------
Sensing line (optional)-------
1 PC
1PC
1 PC
Manual---------------1 PC
Screw----------------- 2 PCS
Product Model
WP Plumbing 3A
EP Electric Heating 16A
WPB linkage,gas boiler 3A
02
TGR-85 THERMOSTAT USER GUIDE
Description of display &Icon
05

ICON TIME ADJUST DEFAULT ADJUST
06:00 20℃
08:00 15℃
11:30 15℃
12:30 15℃
17:00 22℃
22:00 15℃
08:00 22℃
23:00 15℃
TGR-85 THERMOSTAT USER GUIDE
Time programming instructions
key to enter the programming setting,short press the
key to switch the option,press the key or key to adjust each option
key to exit and save.
07
KEY OPTION
workday
1
2
3
4
5
6
Holiday
1
2
Press and hold the
parameter,and press the
TGR-85 THERMOSTAT USER GUIDE
Operating Instruction
1.Power on/off:press to turn on/off the thermostat.
2.
3.
Press the key to switch between manual and automatic modes.
In the automatic mode,press or to adjust the temperature to enter the
automatic temporary mode.This mode runs for only one session.
4.Long press key and key to enter the clock setting,press key to switch
Settings Item,press and keys to adjust the value of each parameter.
5.Press and for 5 seconds to add or cancel the child lock.
06
TGR-85 THERMOSTAT USER GUIDE
Advanced options
When POWER OFF,press the
advanced option setting.
key and the key for 5 seconds to enter the
Press to enter the next option,press and to adjust,and press to exit the
height Level option.
1Temperature
compensation
The default value of the calibration room temperature is -2℃.Press the up and
down keys to adjust.The adjustable range is 9.9℃to -9.9℃.
2 Sensor selection
The temperature sensor is selected as IN by default.Press the up and down keys to
adjust as IN respectively,indicating that the internal.
3Modify the temperature
limit
The default temperature limit value is 35℃.Press the up and down keys to adjust
the range from 5℃to 60℃.
4Temperature difference
start
The default temperature difference is set to 1 °C.Press the up and down keys to
adjust the range to 1-10 degrees.
5 Antifreeze function
Set the default anti-freeze function to OFF,display OFF,press the up key to turn
on anti-freeze and display ON
6
Holiday option and turn
off weekly
programming
Set the default rest day as double OFF.Press the up and down keys to adjust it to
double OFF (1-5), single OFF (1-6), no OFF (1-7)and turn off week programming
(OFF).
7
Primary and secondary
reverse selection
Set the default main and auxiliary reversal to 0.Press the up and down keys to
adjust 0 to turn off the main and auxiliary reversal.01 means auxiliary reverse,02
means auxiliary reverse,03 means main and auxiliary reverse,shutdown and
antifreeze is not on,stop output
8
Passive linkage output
delay time
Set the default passive linkage delay time to 0.Press the up and down keys to
adjust the range of 0-5 minutes.
9Set upper temperature
limit
The default value of the set temperature upper limit is 60℃,and the adjustment
range is 35-95℃by pressing the up and down keys.
10
Restore Factory
Defaults
Set to restore the factory default setting to display.Press the up button to adjust the
display,press the enter button to restore the factory settings.
08