Beok Controls TGW60 Series User manual

3. Power-off memory function
4. Real-time data save function
. 5 5+2 or 6+1or 7days six periods program schedule
6. Anti-freezing function
Accuracy
Floor Set Temp. Range
Sensing Element
Power Consumption
Power Supply
Current Load
External Material
Dimension
Ambient Temp.
Storage Temp.
±1℃
5-60℃
NTC
<1W
100 ~ 240V
≤3A（water heating/gas boiler)
PC+ABS (flame retardant）
86x90x14mm
0-45℃,5-95％RH(Non-condensing）
-5~55℃
Set Temp. Range 5-95℃
I. Product Summary:
II. Technical Parameter:
IV. User Interface Explanation
2. Large screen display and touch button
≤16A(electric heating)
Timing Error <1％
7. 3 sensor modes can be setting
1. Model design same as a cell phone
TGW60 GLASS SCREEN THERMOSTAT
III.Main Functions and Characteristics
VI. Model Spec
TGW60-EP
TGW60-WP
8. Selectable 80mmx80mm European hidden box.
9. With child lock function
TGW60-WPB
16A
3A
3A
Controlled Objects
Week
Program
For electric heating appliances
For water heating appliances
For gas boiler
VII.Wiring Digram
TGW60-EP TGW60-WP
TGW60-WPB
VIII. Thermostat Operation Instruction
1. Setting Power on/off
Press to turn on/off the power.
2. Setting Temperature
Press to set the temperature.
3. Setting the Clock
Long press M and to set minute, hour and week.
Press for adjusting.
4. Setting the Manual Mode.
Manual mode means non-programmable mode.
will display in the screen, it is in manual mode.
Press to set the temperature.
6. Setting the Programmable Mode.
Press and hold M into programmable mode. 12345 and time will display.
12345 display in the position of week means 5+2;
Press to change the time.
Press M to do the temperature adjustment.
Press to change the temperature;
Press M to do the next period adjustment.
Press to exit and save.
If you want to make temporary adjustment in any period,
press or , then will display. When finish the setting, all will
confirm automatically.
Long press to enter into child lock mode, will display.
5. Setting the Child Lock
Long press again, the child lock will be disappeared.
Press M then
Current
Loading
TGW60 series thermostats are luxurious programmable thermostat with
large screen display.It is applied to temperature control of industrial,
commercial and domestic room,and start of control heating applicance,
especially used in the floor-heating systems.
V. Model Definition
EP: For Electric Floor Heating System, 16A
WP: For Water Floor Heating System, 3A
WPB: For Gas Boiler Heating System, 3A
For example: TGW60-EP TGW60-WP TGW60-WPB

Remark:
The defaulted temperature of period3 and period4 is the same as
period2. Please change it according to the request.
Period
Week
Weekend
Period Icon Defaulted Time Defaulted Temp.
1
2
3
4
5
6
1
2
6:00
8:00
11:30
12:30
17:30
22:00
8:00
23:00
20℃
16℃
16℃
16℃
22℃
22℃
16℃
16℃
Press M to switch operation between manual mode and programmable
mode.
7. Advanced Setting
In the state of power-off, press the M key and the key for 5 seconds to
enter the advanced option setting.
Press M to enter the next option, press and to adjust, and press
to exit.
Sensor error:
Please select the right sensor mode. If select the different mode or there
is error of sensor, Err will display on the LCD screen, the thermostat will
stop heating till the problem is solved.
Display Code Function Setting And Options Factory Defult
1ADJ Temp.
compensation -9.9-9.9℃-2℃
2SEN Sensor selection
IN: Internal sensor
OUT: Floor sensor
ALL: Both internal
sensor and floor sensor
IN
3LIT Modify the temp.
limit 5-60℃35℃
4DIF Temp. difference
start 0.5-10℃1℃
5LTP Antifreeze function OFF
6PrG Weekly
programming mode
OFF：Close anti-frozen
ON：Open anti-frozen
2
7rLE Primary and secondary
reverse selection 00
9HlT
Restore factory
defaults
long press up button to
adjust the display “---”,
press power button to
restore the factory settings
60
8dLy Passive linkage
output delay time 0-5min 0
0: 7 days programmable
1: 6+1 programmable
2: 5+2 programmable
00: close the main and
auxiliary reversal
02: auxiliary reversal
Set upper temp.
limit
35-95℃
RFAC
-
IX. Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm
european round box.
(1) (2)
(3)
(1)
(4)
1. Connect the power box according to the wiring diagram.
2. Separate the power supply from the control board cable.
3. Screw the power supply into the box of 86.
4. Connect the power board to the board line, and align the buckle at 30
degrees to complete the installation.
X. ATT:
Thank you for buying this product!
Please read this manual for complete instructions on installing and
operating your thermostat. If you require further assistance, please
feel free to contact us.
In the box you will find:
Thermostat
External sensor
User Manual
Screws
Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or
replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will
charge for the after-sales service.
TGW60-EP TGW60-WP
√
√
√
√
√
√
√
Model TGW60-WPB
√
√
√
TGW60 Heating Thermostat
BEOK