Beok Controls TGP51 User manual

2. Power-off memory function
3. Real-time data save function
. 4 5+2 or 6+1or 7days six periods program schedule
5. Anti-freezing function
Accuracy
Sensing Element
Power Consumption
Power Supply
Current Load
±1℃
NTC
<0.3W
200 ~ 240V 50 ~60Hz
≤3A（water heating)
Set Temp. Range 5-60℃
I. Product Summary:
II. Technical Parameter:
1. Large screen display and touch button
≤16A(electric heating)
6. 3 sensor modes can be setting
TGP51 TOUCH SCREEN THERMOSTAT
III. Main Functions and Characteristics
IV. Button Function
V. Display and Function Description
VI. Model Specific
TGP51-EP
TGP51-WP
7. Selectable 80mmx80mm European hidden box.
8. With child lock function
16A
3A
Controlled Objects
Week
Program
For electric heating appliances
For water heating appliances
The digital heating liquid crystal temperature controller adopts the most
advanced microcomputer control chip in the world, and detects the
temperature through a high-precision sensor inside the thermostat. And in
real time, compared with the temperature set by the user, the load (electric
heating device or valve) is automatically turned on and off to achieve the
purpose of maintaining the indoor constant temperature.
Power on/off;
Mode button: switch manual, automatic time control, temporary
manual, long press time, hour, minute, week settings.
Upper button: temperature plus, plus parameters;
Lower button: temperature minus, minus parameter.
Manual control, flashing for temporary manual control, no display
for automatic control
Heating
The first period, get up in the morning;
The second time, go out in the morning;
The third time, go home at noon;
The fourth time, go out at noon;
The fifth time, go home at night;
The sixth period, sleep at night;
The antifreeze function is turned on.
Press and unlock or unlock at the same time.
M
M
T11
VII. User Interface Explanation
VIII.Wiring Digram
IX. Thermostat Operation Instruction
1. Setting Power on/off
Press to turn on/off the power.
2. Setting Temperature
Press to set the temperature.
3. Setting the Clock
Press to set minute, hour and week.
Press for adjusting.
4. Setting the Manual Mode.
Manual mode means non-programmable mode.
will display in the screen, it is in manual mode.
Press to set the temperature.
Long press to set minute, hour and week.
6. Setting the Programmable Mode.
Press the and at the same time in the off state. LOOP and 12345
will display.
Press to select the control way: 5+2 or 6+1 or 7 days programmable.
12345 display in the position of week means 5+2;
123456 display in the position of week means 6+1;
1234567 display in the position of week means 7 days programmable.
Press to
Press to change the time;
Press to select the periods.
Press to change the temperature ;
Press again to
do time adjustment.
do time adjustment.
will disappear in automatic control state. You can directly press
to adjust temperature, This will return to manual mode.
Press and , will display.at the same time in the on state
Press and , will disappearat the same time in the on state again .
5. Setting the Child Lock
Press , then
Heating
Manual
Antifreeze
Child lock
Room temperature
Out temperature
Clock
Six time periods
Setting temperature
Week
Up
Down
Power on / Power off
Manual / Automatic
TGP51-EP
TGP51-WP
M
M
M
M
M
M
M
M
M
T11T11
T11
T6
SET T EMP
ROO M TEMP
OUT T EMP
MO N TU E WE D THU FRI SAT S UN
M

Remark:
(1) The defaulted temperature of period3 and period4 is the same as
period2. Please change it according to the request.
(2) When setting temperature is 00, this period is power off.
(3) How to check floor temp?
In the power on state, long press and hold then press to check floor
temp., OUT TEMP will display.
Period
Week
Weekend
Period Icon Defaulted Time Defaulted Temp.
1
2
3
4
5
6
1
2
6:00
8:00
11:30
12:30
17:30
22:00
8:00
23:00
20℃
15℃
15℃
15℃
22℃
22℃
15℃
15℃
Press to switch operation between manual mode and programmable
mode.
7. Advanced Setting
In the state of power-off, long press and hold then press into
advanced setting mode. Then press to set relative item.
Remark:
Antifreeze function: The thermostat is in the off state. When the indoor
temperature is lower than 5 °C, the electric valve is opened. When the
indoor temperature rises to 7 °C, the thermostat automatically turns off
the output.
Sensor error:
Please select the right sensor mode. If select the different mode or there
is error of sensor, Err will display on the LCD screen, the thermostat will
stop heating till the problem is solved.
X. Installation Instruction
This product is suitable for standard 80*80mm wall box and 60 mm
european round box.
1.Open the main control board, use a 3.5mm wide vertebral slope to reach
the depth of 4mm in the card slot, and lift it up slightly to open the hook.
2.Remove the back cover and power supply, wire it correctly according to
the wiring diagram, and fix the back cover to the cassette with M4 screws.
3.Connect the lower cover cable to the upper cover board
4.Hang the upper two hooks at a 30-degree angle. Press the two corners
below the thermostat slightly to lock the upper casing and the installation
is complete.
NOTICE: Please strictly follow the wiring diagram and do not let the
water, mud and other debris enter the thermostat, otherwise the
thermostat will be damaged!
Wifi Series Touch Screen Thermostat
XI. ATT:
Thank you for buying this product!
Please read this manual for complete instructions on installing and
operating your thermostat. If you require further assistance, please
feel free to contact us.
In the box you will find:
Thermostat
External sensor
User Manual
Screws
Our Service:
We offer the warranty of 24 months from the sales day.
During the warranty, if it is belong to the quality issue, we will fix or
replace them for you by free after test them.
If it is not quality problem or beyond the warranty time, we will
charge for the after-sales service.
TGP51-EP TGP51-WP
√
√
√
√
√
√
√
Model
Special note:
installing cable please choose: plumbing 1.5-2.5mm2 hard wire.
(1) (2)
(3) (4)
M
M
MM
Display
Code Function Setting And Options Factory
Default
SEN Sensor mode
0:Internal sensor
1:Floor sensor
2:Both internal sensor
and floor sensor
0
OSV Set temp. range
for floor sensor 5-99℃42℃
DIF Precison for
floor temp. 1-9℃2℃
SVH
High limit temp.
for internal sensor 5-99℃35℃
SVL Low limit temp.
for internal sensor 5-99℃5℃
ADJ Measure temp. Check and calibrate
the actual room temp.
0.5℃accuracy
calibrate
FRE Frost-protection 00：Off 00
PON Power memory 00：Off
01：On 00
FAC Factory setting 08：Just display 08
DFI Precision for
room temp. 0.5-3℃1℃
00：Factory reset
01：On