Best IP29 SERIES User manual

SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted By Date
80B 99044167A
IP29 SERIES
RANGE HOOD
Best by Broan, P.O. Box 140, Hartford, WI 53027
Best by Broan, 550 Lemire Blvd., Drummonville, QC J2C 7W9 Canada
AEIP Series
Decorative Flue
(Optional)
For domestic
cooking only.
IP29 Series
Hood
(42-in. hood)
(54-in. hood)
(42-in. hood)
(54-in. hood)
ATDIP Series
Drywall Trim Kit
(Optional)
Offers modern styling, high performance, and durable
construction to meet the needs of professional-quality
residential cooktops.
A complete installation requires several optional components.
Refer to pages 2 & 3 when planning your installation.
FEATURES
HOOD:
•Widths available - 42” & 54”
•Professional Grade Stainless Steel (Type 304 or equivalent)
•Evolution™ stainless steel bafe lters with removable
mesh element - easily accessible, dishwasher safe
•Four-setting cooktop lighting (Uses 50W, GU10 halogen
lamps.
42” wide hood = 6 lamps, 54” wide hood = 8 lamps. Bulbs
included.)
•Four-speed push button blower control
•Exclusive, Heat Sentry™ turns blower ON to HIGH speed
when excess heat is detected
•Air refresh feature - runs the blower at low speed for 10
minutes every 50 minutes
•Exclusive Intelligent Linking system, uses Insteon
technology to communicate with other Best and Broan
equipped or specied product
• Filter maintenance indicator - shows when to clean lters
•Exclusive A.S.C. (Automatic Sensor Control) - uses
particulate detection to activate blower when efuents from
cooking are sensed
DECORATIVE FLUE EXTENSION:
AEIP Series (Optional)
•Professional Grade Stainless Steel (Type 304 or equivalent)
•Widths - 42” and 54”
•Height - 12”, 18”, 24”, and 30”
DECORATIVE DRYWALL TRIM KIT:
ATDIP Series (Optional)
•Professional Grade Stainless Steel (Type 304 or equivalent)
•Widths - 42” and 54”
SPECIFICATION:
•120 VAC, 60 Hz,
•2.5 Amps (without blower - 42” width)
3.3 Amps (without blower - 54” width)

HL0091
-3-
Model 415
(7” round adjustable elbow)
Model 427
(41/2” x 181/2”
to 10” Round,
6” high - lateral
Model 423
(41/2” x 181/2” to
10” Round - vertical
Model 424
(41/2” x 181/2” to
10” Round - horiz.
front/rear
Model 454
(41/2” x 181/2”
to 10” Round -
horiz. /right
Model 453
(41/2” x 181/2”
to 10” Round -
horiz. /left
IP29M SERIES
HOOD
(Canopy with
blower controls
& lighting.
Required for all
installations.)
OPTIONAL
DECORATIVE FLUE
AEIP SERIES
OPTIONAL
DRYWALL TRIM
ATDIP SERIES
-IP29M SERIES RANGE HOOD SYSTEM -
INTERIOR BLOWERS
Model 437
(High capacity roof cap)
Model 441
(10’’ Round wall cap)
Model 634 or 644
(roof cap)
Model 647
(7” Round wall cap)
Model 407
(7” round duct—2 ft. sections)
Model 410
(10” round duct—2 ft. sections)
MODEL P6
BLOWER/ROUGH-IN KIT
(600 cfm interior blower &
rough-in plate)
MODEL P12
BLOWER/ROUGH-IN KIT
(1200 cfm interior blower
& rough-in plate)
Model 418
(10” round adjustable elbow)
Model 421
(10” Round vert.
in-line damper -
Optional)

- 4 -
HL0090
-IP29M SERIES RANGE HOOD SYSTEM -
IN-LINE AND EXTERIOR BLOWERS
In-line and exterior blower rough-in kit
(included with EB6, EB9, EB12, EB15,
ILB3, ILB6, ILB9 and ILB11 blowers.)
Model 418
10” Round
adjustable elbow
(optional)
Model ILB3 (280 cfm)
in-line blower
(includes one 8” to 10”
round transition)
Model EB6 (600 cfm)
or EB9(900 cfm)
exterior blower
Model EB12 (1200 cfm)
or EB15 (1500 cfm)
exterior blower
Model 441
(10” Round
wall cap)
Model 437
(High capacity roof cap)
Model 441
(10” Round wall cap)
Model 421
(10” Round vert.
in-line damper)
Recommended
for use with
exterior blowers
Model 410
(10” Round duct
—2ft. sections)
Model ILB6 (600 cfm)
in-line blower
(includes two 4½” x 18½”
to 10’’ round transitions)
Model ILB9 (800 cfm)
or ILB11 (1100 cfm)
in-line blower
(includes two 8” x 12” to
10’’ round transitions)
IP29M SERIES
HOOD
(Canopy with
blower controls
& lighting.
required for all
installations.)
OPTIONAL
DECORATIVE FLUE
AEIP SERIES
OPTIONAL
DRYWALL TRIM
ATDIP SERIES
Model 643
(8” Round
wall cap)