
SPECIFICATION SHEET
REFERENCE QTY. REMARKS Project
Location
Architect
Engineer
Contractor
Submitted by Date
70C 99044063A
Specially designed to be installed outdoors in a
covered patio or lanai area over residential
commercial-style cooking surfaces or gas and
electric grills.
This unit is not for use with a charcoal grill.
A complete installation requires several optional
components. Refer to page 2 when planning
your installation.
FEATURES
•Corrosion resistant 316 Stainless Steel construction
•UL Listed for use in damp locations when properly
connected to a GFCI circuit.
•Hood width: 42’’ or 54’’
•Halogen lighting (4 x 50 watt GU10 for 42” hood,
6 x 50 watt GU10 for 54” hood) lamps included
•Switch controls: Lighting, on-off, and infinite speed
•Easily accessible, dishwasher-safe stainless steel
baffle filters
•Heat Sentry turns blower ON to HIGH speed when
excess heat is detected
OPTIONS
•Decorative flue (AEWPD Series): Widths - 42’’ and 54’’
Stainless Steel construction - hides ducting and wipes
clean easily
•Designed for use with interior blower model P12D, in-line
blower model ILB11, or exterior blowers EB12 or EB15.
(All blowers - purchase separately)
SPECIFICATIONS
120 VAC, 60 Hz
Amps for 42” hood (without blower): 1.7 A
Amps for 54” hood (without blower): 2.5 A
WPD29M SERIES
RANGE HOOD
BEST BY BROAN P.O. BOX 140 HARTFORD, WISCONSIN 53027
Decorative flue
AEWPD Series