Bestcare BESTLIFT PL600 User manual

BESTLIFT®
FULL BODY PATIENT LIFT
Model: PL600
Ensure the product has been assembled according to the instructions in this
manual. All operators should read and understand the instructions for safe and
proper operation of the patient lift.

1
This product has been tested by SGS, an accredited testing institute to comply with
the requirements of:
ISO 10535, IEC 60601-1, ANSI/AAMI ES60601-1, CAN/CSA-C22.2 No.60601-1,
IEC 60601-1-11, ANSI/AAMI HA60601-1-11, CAN/CSA-C22.2 No.60601-1-11,
IEC 60601-1-2
Date of Manufacture
The manufacturing date can be found on the serial number
label that is located at the top of the mast. The YY in the
serial number is the manufacture year, and the MM is the
manufacture month.
MAX LOAD: 600LB
S/N: PL600YYMM1XXX
BestLift PL600
®
2920 Pacific Dr,
Norcross, GA 30071
1-678-679-6690
MASS OF LIFT:123LB(56KG)
Thank you for choosing Bestcare!
To better serve you, please record the following information for
future use:
Supplier Name: ___________________________________________
Supplier Telephone: ________________________________________
Product Serial Number: _____________________________________
Date of Purchase: _________________________________________
800519

2
i
i
Product Description
Intended Use
The Bestlift® PL600 allows patients up to 600lbs to be lifted
and transferred safely with minimal physical effort provided
by the operator. That is due to it being a full electric lift. The
PL600 can lift the patient with ease from the oor to the bed.
The 6 point spreader bar provides added comfort for the patient
while moving from any surface. With the addition of the optional
battery pack, you will never have to be worried about your lift
not being charged and ready for use.
The PL600 is intended to be used with patients who are
completely immobile or totally dependent on the patient lift for
transfers. The PL600 is intended to be used for transfers of
the patient in and out of bed, their wheelchair, to and from the
commode, or any other type of surface. The PL600 is intended
to be operated by at least one caregiver, who will perform the
lift and transfer. Transfers should always be done on a at,
dry surface and are not intended to be used in high humidity
environments for extended amounts of time.

3
DEFINITIONS & SYMBOLS
In this manual the user refers to the patient or resident and may be used
interchangeably at different times. Caregiver refers to the operator or person
who is assisting with the transfer.
Warning! Failure to heed this warning may
result in damage to the product or serious
injury to the operator and/or user.
Do Not Bleach. No bleach product may be
used. The garment is not colorfast or
structurally able to withstand any bleach.
Important instructions follow. Read and
understand the instructions in the manual
before using the product.
Do Not Dryclean. Garment may not be
commercially drycleaned.
Type BF applied part. Refer to the part of
the medical device which come into
physical contact with the patient in order
for the device to carry out its intended
Do Not Iron. Item may not be smooted or
finished with an iron.
Class II symbol. To identify equipment is
designed that a connection to electrical
earth (ground) is not required.
Tumble Dry, Normal, Low Heat. A machine
dryer may be regularly used at a maximum
of Low Heat setting.
Note! Important information concerning
the product and/or its correct and proper
usage follows.
Do Not Dry. A machine dryer may not be
used.
Advise the operator to consult the
accompanying documents before use.
Machine Wash, Hot. Initial water
temperature should not exceed 82°C or
180°F.
Right side up Do Not Wash
Fragile, handle with care Keep dry
Carton storage temperature limit of -25°C
to 70°C Carton storage humidity limit of 0% to 90%
European Conformity mark, The product
conforms to European Medical Directive
93/42/EEC and meets applicable health,
safety and environmental requirements.
Handle with care
Symbols used in this manual and on the product and their meanings:

4
iSafety Instructions
A BestLift® will provide years of service if it is properly maintained as
any electric and/or mechanical equipment requires. Please pay careful
attention to the following important information regarding the care,
maintenance, and operation of the patient lift. Carefully read these
instructions before assembling the lift, or attempting to lift a user with
the device.
• Before attempting to lift any patient, please practice operating the
lift and explain the lift procedures to the patient
• Please provide special assistance under the caretakers’ discretion.
(i.e. patients who are comatose, spastic, agitated, or otherwise
severely handicapped.)
• The patient lift should be used solely for transferring a user/patient
from one utility (beds, chairs, toilets, etc.) to another. The patient lift
should not be used for transporting or moving any patient from one
location to another location.
• During lifting or lowering, whenever possible, always keep the base
of the lift in the widest position.
• The base of the lift should be closed before moving the lift.
• Do not roll casters over any object while the user/patient is in the
sling.
• Do not lock casters during lifting.
• While being lifted in a sling, always keep the user/patient centered
over the base and facing the caregiver operating the lifter.
• Never leave the user/patient unattended during lifting.
Service personnel may contact Bestcare for any information,
instructions, or certain parts for servicing purpose.

5
WARNING!
• NO modication of this equipment is allowed. It is unsafe to modify the
equipment from its original state. This product is deemed safe to use with
only the original parts as delivered. Unauthorized use of any modied
equipment may result in serious injury or death.
• DO NOT replace any components of the lift without consulting with
Bestcare and must follow proper instruction from Bestcare when replacing
any components.
• DO NOT service any parts of the lift while in use with a patient.
• It is NOT safe to load the equipment more than the indicated maximum safe
working load.
• IF any accessories with lower load capacity than the equipment itself is used,
DO NOT load the equipment more than the lowest maximum safe
working load.
• REMOVE the battery pack if the lift will not be used for some time, to prevent
battery leakage. PERIODICALLY check the battery pack and the charger
• This equipment DOES NOT consist of any materials or ingredients to
which patients are exposed, that may cause bodily harm or injury.
• Prolonged exposure or physical contact with any part of the equipment WILL
NOT cause skin irritation, allergic reaction, etc.
• Using accessories, detachable parts, or materials not described in the
instruction manual MAY RESULT IN SERIOUS INJURIES.
• Keep the equipment away from children and pets when in use. IT MAY
CAUSE SERIOUS INJURY OR DEATH.
• Keep the equipment away from any pests or pest infested area. Diseases
transferred from pests to the equipment MAY CAUSE SERIOUS ILLNESS
to patients upon contact.
• If the lift is exposed to the sun for long periods of time, be CAUTIOUS as the
surface of the lift may be hot.
• There are no risk if the lift is exposed to reasonably foreseeable
environmental conditions
• CAUTION! The controller contains parts and assemblies that could be
susceptible to damage by electrostatic discharge (ESD). To reduce
the likelihood of this, one should be grounded prior to using the controller.
• DO NOT use the lift on an inclined surface that is greater than 5°.
• CAUTION! The black plastic bolt caps can fall off the bolt, and they are a
choking hazard.If the cap will not stay on the bolt, replace it immediately.

6
FEATURES & OVERVIEW
i
4
5
11
10
12
8
9
2
3
6
7
1
* PL600 model shown
UNLESS OTHERWISE SPECIFIED:
SHEET: SCALE:
PART NUMBER:
DESCRIPTION:
DATE: DRAWN BY:
MATERIAL:
FINISH:
2920 PACIFIC DRIVE
NORCROSS, GA 30071
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
BESTCARE LLC. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF BESTCARE LLC IS PROHIBITED.
9/8/2017
1 of 1
DaTong Wrench
ALL DIMENSIONS IN MM
1-6
6-30
30-120
120-400
0.1
0.2
0.3
0.5
Easy Tools Screwdriver
10.2 lb
(4.6 kg)
11 lb
(5 kg)
14.6 lb 0.7 lb 0.6 lb
(6.6 kg) (0.3 kg) (0.3 kg)
7.4 lb
(3.4 kg)
9Boom
Emergency Lowering
1 **Base
3Control Unit
7Front Caster
Leg Opening Pedal
11
Combined
Weight of
82 lb
(37.3 kg)
2
Actuator
5Spreader Bar
6Rear Caster 10
Charger4Hand Control
8
Mast
12 Emergency Stop Button
** Heaviest detachable part
• Prior to assembly, unpack and inspect all parts from the shipping carton.
Contact you dealer immediately if any parts are damaged or missing.
• Easy tools are provided to assist with initial set up. To ensure maximum
safety, product should not be put into use until all connections are tightened
using standard tools.

7
mm (in)
A1887.8 (74.3)
B1197.4 (47.1)
C690.1 (27.2)
D626.7 (24.7)
E998.0 (39.3)
F889.0 (35.0)
G574.6 (22.6)
H262.0 (10.3)
I461.7 (18.2)
J246.7 (9.7)
K427.9 (16.8)
L119.4 (4.7)
M26.2 (1.0)
PL600
A
B
600
C
D
G E 700 F
H
K
I
L
J
M

8
SPECIFICATIONS & OPTIONS
* Bestcare is committed to continuous improvements of our products therefore
the specication, dimensions, and features listed above are for guidance only
and are subject to change without prior notice.
C
B
G
H
A
D
F
E
Standard Features
1 6-Point Spreader Bar
2 4” Rear Caster with Brake
3 3” Dual Front Caster
4 Power Control Unit
5Reinforced Foot Pedal
Optional Features
1 2-Point Spreader Bar
2 Charging Cradle
3 Digital Scale
4 Additional Battery pack
Dimensions & Specifications
Model
PL600
Safe Working Load
600 lb
273 kg
ABase Length
47.3"
1201.4 mm
BBase Ext. Width - Closed
26.4"
670.6 mm
CBase Int. Width - Opened
39.3"
998.0 mm
DMast Height
51.3"
1304.0 mm
ELifting Height - Lowest
21.5"
546.4 mm
FLifting Height - Highest
68.6"
1743 mm
G Base Opened Turning Diameter
63.4”
1610.4 mm
H Base Closed Turning Diameter
58.4”
1483.4 mm
PL600
Lift Weight Unloaded (lb) 126.5
Lift Weight Unloaded (kg) 57.5
Specications of Control Unit
Input Voltage 220-240VAC 50Hz / 110-120VAC 60Hz
Output Voltage 24 VDC
Battery Pack 24 VDC 5AH
Lift Control Handset and Panel
Protection Class IP54 (Protection against dust and splash of water)
Sound Level Under Full Load 16 db
Sound Level Under No Load 11 db
Lift Cycles Per Charge 20 full cycles under full load
Over-Duty Warning by LCD

9
Installation
Step 1: Remove base from box.
Step 2: Insert the mast to the base bracket, and secure it in place by inserting
and tightening the long hex head bolt and nut at the top slot hole on the side of the
bracket as following. Make sure the mast is inserted behind the metal plate that is on
the back of the bracket as shown, otherwise, the holes may not align correctly.
Metal Plate

10
Step 3: Insert and tighten the other long hex head bolt, nut, and washers to the
bottom hole on the side of the bracket to secure the mast. Insert the black plastic
cover to the nut after the bolt is tightened.
Step 4: Reinsert and tighten the carriage bolt to the front slot hole of the bracket,
and the mast should be rmly secured to the base. Insert the black plastic cover
to the nut after the bolt is tightened.

11
Step 6: Install the boom to the mast and align the holes. Then secure it by
reinstalling the bolt, washer and nut. Once the screw is tightened insert the
plastic cap.
Step 7: Secure the lower end of the actuator to the bracket on the mast using a pin
and retaining ring as follows. It is critical to have the motor part of the actuator to
face the same direction as the big arrow as follows.
Step 5: Insert the round plastic cover and the large plastic washer to the boom as
follows.

11
Step 6: Install the boom to the mast and align the holes. Then secure it by
reinstalling the bolt, washer and nut. Once the screw is tightened insert the
plastic cap.
12
Step 8: Secure the upper end of the actuator to the bracket on the boom
using a pin and retaining ring as follows.
Step 9: Secure the spreader bar to the boom using a pin and retaining ring as
follows.

13
Power Control Unit
4
3
21
5
M5 SCREWS
M4 SCREWS
M4
UNLESS OTHERWISE SPECIFIED:
SHEET: SCALE:
PART NUMBER:
DESCRIPTION:
DATE: DRAWN BY:
MATERIAL:
FINISH:
2920 PACIFIC DRIVE
NORCROSS, GA 30071
PROPRIETARY AND CONFIDENTIAL
THE INFORMATION CONTAINED IN THIS
DRAWING IS THE SOLE PROPERTY OF
BESTCARE LLC. ANY REPRODUCTION IN PART
OR AS A WHOLE WITHOUT THE WRITTEN
PERMISSION OF BESTCARE LLC IS PROHIBITED.
9/27/2017
1 of 1
M4x0.7x10mm Machine Screw
ALL DIMENSIONS IN MM
1-6
6-30
30-120
120-400
0.1
0.2
0.3
0.5
M5

14
Operating Instructions
Double check all assemblies for tightness and read operating
instructions carefully prior to use.
PREPARATION BEFORE LIFTING
• Twist the RED EMERGENCY STOP BUTTON clockwise.
• Verify the Lifting and Lowering Functions by pressing either the UP or DOWN
button on the hand control once.
• Position the base of the lift around or under the object.
• Widen the base and disengage the caster brakes.
Do not attempt to transfer a patient without prior approval of the person’s nurse.
Also, do not transfer without having studied the instructions and performed
several practices in operating the product. Together (with the patients doctor,
nurse, or medical attendant) select a sling that is both practical and comfortable.
The sling selected should be one that serves the needs of the patient, while
providing the patient with optimal safety. Never interfere with the lift, unless
instructed by the attendant. Have a doctor, nurse, or medical attendant
(experienced in the use of the BestLift®) present during the rst few times the lift
is used to transfer a new user.
i
i
For optimum performance the lift should be transported and stored in
following condition range:
• -25°C to +5°C (-13°F to 41°F), and
• +5°C to +35°C (41°F to 95°F) at a non-condensing relative humidity 0% to 90%
• +35°C to +70°C at a water vapor pressure up to 5 kPa
For optimum performance the lift should be operated in following condition
range:
• at a temperature range of +5°C to +40°C (+41°F to +104°F)
• at a non-condensing relative humidity range of 15 % to 90 %, but not requiring a
water vapor partial pressure greater than 5 kPa
• 70 kPa to 106 kPa atmospheric pressure
The lift will not have any potential electromagnetic or other interference with
other devices.

Actuator
Battery Pack
Release Handle
Emergency Stop Button
Up / Down Button
LCD Display Panel
Battery Pack
Charger
Clear Contact Plastic
Cover
DC In
Not Used
Hand Control
Charging Cradle
(Optional)
Additional Battery Pack
(Optional)
Power Control Unit Overview
15
WARNING!
• Contains a long charger cord that may cause strangulation if used improperly!
• Keep long charger cord out of walkway where it poses a
tripping hazard!
• Have the charger port on the controller facing away from the wall for easy
disconnection!
• When removing the battery, need to secure the battery with both hands as it
can cause injury if dropped!
1. Connect Actuator as shown above.
2. Connect Hand Control as shown above.
3. The battery should be charged daily to prolong the battery life.
4. Must remove the clear battery contacts plastic cover before use.
Remove the battery in order to remove the plastic cover.

16
DC Charger
(included)
LED Indicator
* Amber = charging
* Green = charging completed
Charger Plug-in
LED Indicator
* Green = power connected
* Blank = power disconnected
Charging Cradle
(Optional)
LCD Display Panel Signs - Charging
During charging, the LCD Display Panel will show one of the four signs below.
• The DC Charger must be connected.
• The emergency stop button must be released.
• The battery will not be charged if the emergency button is pressed in.
LCD Display Panel Signs
When the emergency stop button is released, the LCD Display Panel will show one of the four signs
below.
• The sign will display for 5 seconds.
• Then the lift will go into standby mode and the sign disappears.
• The lift is ready for use.
Charging: DC Charger or Charging Cradle
Release Pressed in

17
LED Indicator
* Green = In Use
* Blank = Standby
Lifting
Lowering
Operating Lift: Using Hand Control
Operating Lift: Using LCD Display Panel

18
Warning! - Overloaded
During lifting if the lift is overloaded, the LCD
Display Panel will show the sign on the left and
lifting will be deactivated immediately.
• The buzzer will beep 3 times.
• Lowering the lift by pressing the DOWN
button is still allowed.
• The emergency stop button must be pressed
in and then release the button before further
lifting.
Warning! - Charge Battery Immediately
If the battery is critically low, the LCD Display
Panel will show the sign on the left either when
the emergency stop button is released or when a
button on the LCD Display Panel is pressed.
• Lift operation is deactivated.
• Battery needs to be charged immediately
before further use.
Warning! - Battery Low and Charging is Needed
If the battery needs to be charged, the LCD
Display Panel will show a blinking low battery sign
shown on the left either when the emergency stop
button is released or when a button on the LCD
Display Panel is pressed.
• Lift is still functioning.
• Buzzer will beep every 2 seconds.
• Battery needs to be charged immediately after
use.

19
Sling Type Material Sizes
Mesh M, L
Polyester M, L, XXL
Mesh S, M, L
Polyester S, M, L, XXL
Universal Disposable Nonwoven, Disposable M, L
Universal Disposable with Head Support Nonwoven, Disposable S, M, L, XXL
Sani Polyester S, M, L, XXL
Polyester M, L, XL
Mesh M, L, XXL
Invacare® Replacement with Head Support Mesh M, L, XL, XXL
Hoyer® Replacement Polyester M, L, XL
Hoyer® Replacement with Head Support Polyester M, L, XL
Liko®/Guldmann® Replacement Polyester with PU Coating M, L, XL
Liko®/Guldmann® Replacement with Head Support Polyester with PU Coating M, L, XL
Liko®/Guldmann® Disposable Replacement Nonwoven, Disposable M, L, XL
Liko®/Guldmann® Disposable Replacement with Head Support Nonwoven, Disposable M, L, XL
Mesh
Polyester
Pediatric with Head Support Standard
Invacare® Replacement
Universal with Head Support
Universal
Available slings compatible with Patient Lift
If the patient is pregnant or has skin conditions, consult with a
doctor before use.
ALWAYS check that the sling weight capacity is
suitable for the patient
All slings are type BF applied parts
20
For further product information and support, please contact your dealer
or visit our website at www.bestcarellc.com