Bestop Duster 90033 User manual

Installation Instructions
INSTALLATION TIME SKILL LEVEL
1/2 Hour 1 - Easy
TOOLS
Vehicle Application
•Jeep JK Wrangler
2007
Part Number: 90033
Duster™ Deck Cover
www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep Accessories by Bestop.
T30

Duster™ Deck Cover – Installation Instructions
Rev. 3 1006 90033 pg. 2
Parts List
Duster™ Deck Cover Qty - 1
Seat Strap Qty - 1
Wrap Fabric around Bows Remove Pivot Brackets
Remove Top Assembly
Remove Rear Window
Open zipper on Rear Window. Pull the Tailgate Bar
out of the mounts on the vehicle. Slide the Tailgate
Bar off the Rear Window and set it aside to be
used later.
Release the front of the top from the windshield
and lay the bows down. Refer to owner's manual
for instructions.
Fold the Top Down
Wrap the top fabric tightly around the bows. Then
wrap the legs tightly around the top fabric.
Pull Tailgate Bar out
of Tailgate Mounts Slide Tailgate Bar off of Rear Window
Wrap fabric
around bows
Wrap fabric legs
around top fabric
Use a T30 Torx to remove the soft top assembly.
Use a T30 Torx to remove the main Pivot Brackets
on both sides of the vehicle.
T30 Torx Remove Bow and
Fabric Assembly
T30 Torx Remove Pivot
Bracket

Duster™ Deck Cover – Installation Instructions
Rev. 3 1006 90033 pg. 3
Place Seat Strap in Trunk
Tumble Seat Forward
Thread Seat Strap through
Child Seat Restraints
If you have a Windjammer™ on your vehicle, zip
the Duster™ Deck Cover to the zipper under the
flap on the Windjammer™.
Secure Duster™ Deck Cover
to Windjammer™ – Optional
Windjammer™
Duster™
Deck Cover
Zip Duster™ Deck Cover to
Windjammer™
Open the trunk and lay the Seat Strap across the
bottom of the trunk.
Open Trunk Lid
Seat
Strap
Fold the seat forward.
View from Rear
Trunk Lid (Closed)
Thread the end of the Seat Strap through the child
seat restraints and through the buckle. Tighten the
strap.
Seat
Seat
View from Rear
Thread Strap through Seat
Restraints and Buckle
Slide the "C" channel on the Tailgate Bar onto the
tubed strip sewn to the rear of the Duster™ Deck
Cover. Insert the Tailgate Bar into the mounts on
each side of the tailgate opening.
Install Tailgate Bar
Tailgate Bar
Tailgate Mount
Duster™
Deck Cover

Duster™ Deck Cover – Installation Instructions
Rev. 3 1006 90033 pg. 4
Roll the plastic strip on each side of the Duster™
Deck Cover into the retainer channel on the
vehicle.
Secure Plastic Strips
Roll Plastic Strip
into Retainer
Wrap the straps on the front of the Duster™ Deck Cover around the sport bar
and the bows. Thread the end through the buckle.
Secure Straps
Sport Bar
Roll the plastic strip on the rear corners of the
Duster™ Deck Cover into the retainer channel on
the vehicle.
Secure Rear Corners
Roll Plastic into Rear
Corner Retainer
Wrap the two (2) collars around the rear sport bars and fasten the hook and
loop strips to each other.
Secure Collars
Fasten Hook and Loop
Strips to each other
Sport
Bar
Duster™
Deck Cover
Duster™
Deck Cover
Duster™
Deck Cover

Duster™ Deck Cover – Installation Instructions
Rev. 3 1006 90033 pg. 5
For further information or request for warranty work, please contact:
Bestop Inc. Customer Service
[phone]
[phone]
Limited Warranty
We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been
normal use and proper maintenance. This warranty applies to the original purchaser only. All remedies under this warranty are limited
to the repair or replacement of any item or items found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase
and submit a copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or
replaced item or items to you freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstalla-
tion, misuse, Acts of God, or by defective parts not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD ISAS FOLLOWS: ALL “SOFT GOODS” MANUFACTURED BY OUR COMPANY (USING PRIMAR-
ILY VINYLS, PLASTICS, AND/OR FOAM): ONE YEAR FROM DATE OF PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY
ARE LIMITED IN DURATION TOTHE SAME DURATIONAND SCOPEAS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY
SHALL NOT BE LIABLE FORANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.
Care and Maintenance of your Bestop Duster™ Deck Cover
Your Duster™ Deck Cover is made of the finest materials available. To keep it looking new and for the maximum possible wear, it will need periodic cleaning
and maintenance.
Washing: The fabric should be washed often using soap, warm water and a soft bristle brush. Rinse with clear water to remove all traces of soap.
Water: Seeping through at the seams may be stopped by applying 3-M Scotchgard® on the inside of the seams. Rips in the fabric may be repaired with
Bondex® iron on patches. Iron the patches to the Inside of the top, carefully following the Bondex® instructions.