Bestop HighRock 4x4 42908 User manual

Installation Instructions
INSTALLATION TIME SKILL LEVEL
1-1/2 Hours 3 - Moderately Difficult
TOOLS
HighRock 4x4TM
18mm and
19mm
•HighRock 4x4TM Front Bumper
Part Number: 42908 / 44908
Vehicle Application: 1987 - 1995 Jeep®Wrangler
•HighRock 4x4TM Approach RollerTM
Part Number: 42905 (Sold Separately)
•HighRock 4x4TM Tubular
Grill Guard
Part Number: 42906 /
44906 (Sold Separately)
18mm 3/16"
Front Bumper
www.Bestop.com - We’re here to help! Visit our web site and click on “Ask a Question”. Click here for more Jeep®Accessories by Bestop.

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42908 / 44908 / 42905 / 42906 / 44906 pg. 2
Parts List and
Hardware Identification
Roller, Part Number 414.21, Qty - 1
42908 HighRock 4x4TM Front Bumper
Flat Washer, Part Number
414.23, Qty - 2
Roller Rod, Part Number 414.22, Qty - 1
42905 HighRock 4x4TM Approach RollerTM (Sold Separately)
Hex Bolt, Part Number
414.24, Qty - 2
42906 / 44906 HighRock 4x4TM Tubular Grill
Guard (Sold Separately)
Hex Bolt, Part Number
414.26, Qty - 4
Plastic Hole Plug, Part
Number 414.20, Qty - 4
Washer, Part Number
414.27, Qty - 4
Lock Washer, Part Number
414.28, Qty - 4
Front Bumper,
Part Number 415.33 (Gloss Finish),
Part Number 498.25 (Matte Finish),
Qty - 1 Fare Lead Roller Plate,
Part Number 414.19 (Gloss Finish),
Part Number 497.50 (Matte Finish),
Qty - 1
Tubular Grill Guard,
Part Number 414.25 (Gloss Finish),
Part Number 497.49 (Matte Finish),
Qty - 1
Hardware Kit Part # 498.37
Hardware Kit
Part # 498.36

Rev. D 1112 42908 / 44908 / 42905 / 42906 / 44906 pg. 3
HighRock 4x4TM Front Bumper Installation Instructions
If you have a Fare Lead Roller, use the mounting
hardware provided with the roller to install it on the
Fare Lead Plate.
Install Fare Lead Roller on
Fare Lead Plate
Use a socket wrench with a 18mm socket
to remove the two (2) bolts on the top of
the bumper on each side, four (4) bolts
altogether. When these are removed, use a
19mm socket to remove the bolt underneath
the bumper on each side. Set these bolts
aside to be used to install the HighRock
4x4TM Front Bumper.
Remove the Original Bumper
If you intend to install a fare lead
roller and/or a winch on your bumper,
you will need to install them on the bumper before
you install the bumper on the vehicle.
If you decide at a later date to install a fare lead
roller or winch on your vehicle, it will be easiest
to remove the bumper from the vehicle before
installing.
If you wish to install a winch without a fare lead
roller, skip step 2.
If you do not wish to install a fare lead roller or
winch at this time, skip steps 2 and 3.
NOTE
Fare Lead Plate
Fare Lead
Roller
Use the hardware supplied
with your fare lead roller to
secure it to the Fare Lead
Plate
Bumper
Remove 19mm
Bolt
Remove 18mm
Bolts
Bumper

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42908 / 44908 / 42905 / 42906 / 44906 pg. 4
Install Bumper Assembly
Install 42905 HighRock 4x4TM
Approach RollerTM – Sold
Separately
Place the Roller between the flanges on the Front
Bumper and align the holes in the Roller with the
holes in the flange. Slide the Rod through the flang-
es and the Roller. Install a Hex Bolt and a Washer
in each end of the Rod to secure it to the flanges.
Lift the Front Bumper Assembly onto the
front frame rails on the vehicle. Reinstall
the hardware that was removed in step 3.
If you are not installing an optional Tubular
Grill Guard, go to Step 7.
Twoormorepeoplearerequired
to lift the bumper safely.
Bumper
Reinstall 18mm
Bolts
Reinstall 19mm
Bolt
Roller
Rod
Flange
Washer
Hex Bolt
If you intend to install a winch only, you
may install it directly on your bumper
and do not need to use the Fare Lead Plate.
NOTE
Place the Front Bumper on a flat surface. Place the
Fare Lead Plate assembly on the bumper and align
the mounting holes. Place the winch on top of the
plate and use the hardware provided with the winch
to secure it to the bumper.
Install Fare Lead Plate and/or
Winch on Bumper
Front Bumper
Fare Lead Plate
Winch
Use the hardware supplied
with your winch to install it
on the bumper

Rev. D 1112 42908 / 44908 / 42905 / 42906 / 44906 pg. 5
HighRock 4x4TM Front Bumper Installation Instructions
Place the Tubular Grill Guard on the Front Bumper
so that the holes in the guard line up with the holes
in the angled face of the bumper. Use two (2) Hex
Bolts, Washers, Lock Washers and Lock Nuts to
secure each side of the Tubular Grill Guard.
Install 42906 HighRock 4x4TM
Tubular Grill Guard – Sold
Separately
Tubular Grill Guard
Hex Bolts
View from Under Bumper
Front
Bumper
Front Bumper
If you are not installing an optional Grill Guard, in-
stall the Plastic Hole Plugs from the parts kit in the
holes in the bumper.
Install Hole Plugs
Front Bumper
Plastic Hole Plugs
Washers
Lock Washers

HighRock 4x4TM Front Bumper Installation Instructions
Rev. D 1112 42908 / 44908 / 42905 / 42906 / 44906 pg. 6
For further information or request for warranty work, please contact:
Bestop Inc. Customer Service
[phone]
[phone]
Limited Warranty
We warrant our product to be free from defects in material and workmanship, for the terms specified below, provided there has been normal use and
proper maintenance. This warranty applies to the original purchaser only.All remedies under this warranty are limited to the repair or replacement of
any item or items found by the factory to be defective within the time period specified.
If you have a warranty claim, first you must call our factory at the number below for instructions. You must retain proof of purchase and submit a
copy with any items returned for warranty work. Upon completion of warranty work, if any, we will return the repaired or replaced item or items to you
freight prepaid. Damage to our products caused by accidents, fire, vandalism, negligence, misinstallation, misuse,Acts of God, or by defective parts
not manufactured by us, is not covered under this warranty.
THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “PRODUCTS” MANUFACTURED BY OUR COMPANY: ONE YEAR FROM DATE OF
PURCHASE.
ANY IMPLIED WARRANTIES OF MERCHANTABILITYAND/OR FITNESS FORAPARTICULAR PURPOSE CREATED HEREBYARE LIMITED IN
DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS WRITTEN WARRANTY. OUR COMPANY SHALL NOT BE LIABLE FOR
ANY INCIDENTAL OR CONSEQUENTIAL DAMAGE.
Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential damages, so
the above limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.