Bestway Flowclear 58486 User manual

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书

303021216278

58486

bestwaycorp.com/support

Visit Bestway YouTube channel

Hmax 1.5 m

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书

SAFETY INSTRUCTIONS

WARNING

IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW

ALL SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

When installing and using this electrical equipment, basic safety

precautions should always be followed, including the following:

• The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD)having a rated

residual operating current not exceeding 30 mA.

• The power source on the wall of building should keep more than

4 m away from pool.

• The appliance must be supplied by earthed power source.

• RISK OF ELECTRIC SHOCK - The pump cannot be using

while people are inside the pool. Forbid the access of the pool

in case of damage of the sand filter.

• DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

• To reduce the risk of electric shock, replace damaged cord

immediately.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

• Extension cords can’t be used.

• Risk of electric shock. Using the sand filter with an unmatched

electrical supply is dangerous and will permanently damage the

sand filter.

• Do not remove the grounding prong or modify the plug in

anyway. Do not use adaptor plugs. Consult a qualified

electrician for any questions relating to validity of your plugs or

grounding.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

• Handle the sand filter with care. Do not pull or carry the sand

filter by the power cord. Never pull a plug from the outlet by

yanking the power cord. Keep cord free from abrasions. Sharp

objects, oil, moving parts, and heat should never be exposed to

the sand filter.

• Always unplug this product from the electrical outlet before

removing, cleaning, servicing or making any adjustment to the

product.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

• On raining days

• Before cleaning or other maintenance

• Leave it unattended on holidays

• When the appliance will be not used for long time, such as in

the winter, the pool set should be disassembled and stored

indoor.

• CAUTION: Read the instruction before using the appliance

and installation/reassembly every time.

• Safekeeping the instruction. For reconstruction the pool set

every time, please always refer to the instructions.

• If instruction is missed, please contact with Bestway or search it

in website: www.bestwaycorp.com

• Electric installations should follow national wiring rules. Consult

a qualified electrician for any questions.

CAUTION: This sand filter is for use with storable pools only.

Do not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily disassembled for

storage and reassembled to its original integrity. A

permanently-installed pool is constructed in or on the ground or in

a building such that it cannot be readily disassembled for storage.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Cleaning and user maintenance must be performed by an adult

above 18 years old who is familiar with the risk of electric shock.

NOTES:

• Place the sand filter on solid, level ground.

Ensure the sand filter is at least 3.5 meters

away from poolside. Keep distance as far as

possible.

• Pay attention to position pool and sand filter so

adequate ventilation, drainage, and access for

maintenance is available. Never place the

filter in an area that may accumulate water, or on a walking path

with lots of foot traffic.

• It is necessary to have the plug accessible after installation of the

pool. The plug of the sand filter shall be at least 3.5 m away from

the pool.

• Atmospheric conditions may affect the performance and life span

of the sand filter; take adequate precautions to protect the sand

filter from unnecessary wear and tear that may occur during

periods of cold or hot weather and/or exposure to sun.

• Please examine and verify all sand filter components are present

before use. Notify Bestway at the customer service address listed

on this manual for any damaged or missing parts at the time of

purchase.

• It is imperative to change as soon as possible all deteriorated

parts. Only use parts approved by the manufacturer.

• Do not allow children or adults to lean or sit on the apparatus.

• Do not add chemicals to the sand filter.

• When chemical products are used to clean the pool water, it is

recommended to respect a minimum filtration time to preserve the

health of swimmers which depends on compliance of health

regulation.

• Only the media provided or specified by the manufacturer is to be

used with product installation.

• It is essential to check that the suction openings are not obstructed.

• It is advisable to stop the filtration during maintenance operations

on the filtration system.

• Regularly monitor the filter clogging level.

TO THE STORE

QUESTIONS? PROBLEMS?

MISSING PARTS?

For FAQ, Manuals, Videos Or

Spare Parts, Please Visit

bestwaycorp.com/support

SAND FILTER

OWNER’S MANUAL

• A weekly check is recommended for backwashing or

cleaning. Minimum daily filtration operating time of 8 hours is

recommended to ensure clear pool water.

• It is essential to change any damaged element or set of

elements as soon as possible. Use only parts approved by

person responsible for placing the product on the market.

• All filters and filter media shall be inspected regularly to

ensure that there is not a build-up of detritus thus preventing

good filtration. The disposal of any used filter media should

also be in accordance with applicable regulations/legislation.

• Mind all the safety requirements and recommendations

described in the manual. In case of doubt on the pump or

any circulation devices, contact a qualified installer, or the

manufacturer/importer/distributor. The water circulation

installation shall comply with the European as well as

national/local regulations, especially when dealing with

electrical issues. Any change of valve position, pump size,

grille size can cause a change of the flow and the suction

velocity can be increased.

• This product is not intended for commercial use.

Please read the instruction manual carefully and

keep it for future reference.

SAVE THESE INSTRUCTIONS

SAFETY INSTRUCTIONS

WARNING

IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW

ALL SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

When installing and using this electrical equipment, basic safety

precautions should always be followed, including the following:

• The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD)having a rated

residual operating current not exceeding 30 mA.

• The power source on the wall of building should keep more than

4 m away from pool.

• The appliance must be supplied by earthed power source.

• RISK OF ELECTRIC SHOCK - The pump cannot be using

while people are inside the pool. Forbid the access of the pool

in case of damage of the sand filter.

• DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

• To reduce the risk of electric shock, replace damaged cord

immediately.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

• Extension cords can’t be used.

• Risk of electric shock. Using the sand filter with an unmatched

electrical supply is dangerous and will permanently damage the

sand filter.

• Do not remove the grounding prong or modify the plug in

anyway. Do not use adaptor plugs. Consult a qualified

electrician for any questions relating to validity of your plugs or

grounding.

• Handle the sand filter with care. Do not pull or carry the sand

filter by the power cord. Never pull a plug from the outlet by

yanking the power cord. Keep cord free from abrasions. Sharp

objects, oil, moving parts, and heat should never be exposed to

the sand filter.

• Always unplug this product from the electrical outlet before

removing, cleaning, servicing or making any adjustment to the

product.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

• On raining days

• Before cleaning or other maintenance

• Leave it unattended on holidays

• When the appliance will be not used for long time, such as in

the winter, the pool set should be disassembled and stored

indoor.

• CAUTION: Read the instruction before using the appliance

and installation/reassembly every time.

• Safekeeping the instruction. For reconstruction the pool set

every time, please always refer to the instructions.

• If instruction is missed, please contact with Bestway or search it

in website: www.bestwaycorp.com

• Electric installations should follow national wiring rules. Consult

a qualified electrician for any questions.

CAUTION: This sand filter is for use with storable pools only.

Do not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily disassembled for

storage and reassembled to its original integrity. A

permanently-installed pool is constructed in or on the ground or in

a building such that it cannot be readily disassembled for storage.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Cleaning and user maintenance must be performed by an adult

above 18 years old who is familiar with the risk of electric shock.

NOTES:

• Place the sand filter on solid, level ground.

Ensure the sand filter is at least 3.5 meters

away from poolside. Keep distance as far as

possible.

• Pay attention to position pool and sand filter so

adequate ventilation, drainage, and access for

maintenance is available. Never place the

filter in an area that may accumulate water, or on a walking path

with lots of foot traffic.

• It is necessary to have the plug accessible after installation of the

pool. The plug of the sand filter shall be at least 3.5 m away from

the pool.

• Atmospheric conditions may affect the performance and life span

of the sand filter; take adequate precautions to protect the sand

filter from unnecessary wear and tear that may occur during

periods of cold or hot weather and/or exposure to sun.

• Please examine and verify all sand filter components are present

before use. Notify Bestway at the customer service address listed

on this manual for any damaged or missing parts at the time of

purchase.

• It is imperative to change as soon as possible all deteriorated

parts. Only use parts approved by the manufacturer.

• Do not allow children or adults to lean or sit on the apparatus.

• Do not add chemicals to the sand filter.

• When chemical products are used to clean the pool water, it is

recommended to respect a minimum filtration time to preserve the

health of swimmers which depends on compliance of health

regulation.

• Only the media provided or specified by the manufacturer is to be

used with product installation.

• It is essential to check that the suction openings are not obstructed.

• It is advisable to stop the filtration during maintenance operations

on the filtration system.

• Regularly monitor the filter clogging level.

• A weekly check is recommended for backwashing or

cleaning. Minimum daily filtration operating time of 8 hours is

recommended to ensure clear pool water.

• It is essential to change any damaged element or set of

elements as soon as possible. Use only parts approved by

person responsible for placing the product on the market.

• All filters and filter media shall be inspected regularly to

ensure that there is not a build-up of detritus thus preventing

good filtration. The disposal of any used filter media should

also be in accordance with applicable regulations/legislation.

• Mind all the safety requirements and recommendations

described in the manual. In case of doubt on the pump or

any circulation devices, contact a qualified installer, or the

manufacturer/importer/distributor. The water circulation

installation shall comply with the European as well as

national/local regulations, especially when dealing with

electrical issues. Any change of valve position, pump size,

grille size can cause a change of the flow and the suction

velocity can be increased.

• This product is not intended for commercial use.

Please read the instruction manual carefully and

keep it for future reference.

SAVE THESE INSTRUCTIONS

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

SAFETY INSTRUCTIONS

WARNING

IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW

ALL SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

When installing and using this electrical equipment, basic safety

precautions should always be followed, including the following:

• The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD)having a rated

residual operating current not exceeding 30 mA.

• The power source on the wall of building should keep more than

4 m away from pool.

• The appliance must be supplied by earthed power source.

• RISK OF ELECTRIC SHOCK - The pump cannot be using

while people are inside the pool. Forbid the access of the pool

in case of damage of the sand filter.

• DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

• To reduce the risk of electric shock, replace damaged cord

immediately.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

• Extension cords can’t be used.

• Risk of electric shock. Using the sand filter with an unmatched

electrical supply is dangerous and will permanently damage the

sand filter.

• Do not remove the grounding prong or modify the plug in

anyway. Do not use adaptor plugs. Consult a qualified

electrician for any questions relating to validity of your plugs or

grounding.

• Handle the sand filter with care. Do not pull or carry the sand

filter by the power cord. Never pull a plug from the outlet by

yanking the power cord. Keep cord free from abrasions. Sharp

objects, oil, moving parts, and heat should never be exposed to

the sand filter.

• Always unplug this product from the electrical outlet before

removing, cleaning, servicing or making any adjustment to the

product.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

• On raining days

• Before cleaning or other maintenance

• Leave it unattended on holidays

• When the appliance will be not used for long time, such as in

the winter, the pool set should be disassembled and stored

indoor.

• CAUTION: Read the instruction before using the appliance

and installation/reassembly every time.

• Safekeeping the instruction. For reconstruction the pool set

every time, please always refer to the instructions.

• If instruction is missed, please contact with Bestway or search it

in website: www.bestwaycorp.com

• Electric installations should follow national wiring rules. Consult

a qualified electrician for any questions.

CAUTION: This sand filter is for use with storable pools only.

Do not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily disassembled for

storage and reassembled to its original integrity. A

permanently-installed pool is constructed in or on the ground or in

a building such that it cannot be readily disassembled for storage.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Cleaning and user maintenance must be performed by an adult

above 18 years old who is familiar with the risk of electric shock.

NOTES:

• Place the sand filter on solid, level ground.

Ensure the sand filter is at least 3.5 meters

away from poolside. Keep distance as far as

possible.

• Pay attention to position pool and sand filter so

adequate ventilation, drainage, and access for

maintenance is available. Never place the

filter in an area that may accumulate water, or on a walking path

with lots of foot traffic.

• It is necessary to have the plug accessible after installation of the

pool. The plug of the sand filter shall be at least 3.5 m away from

the pool.

• Atmospheric conditions may affect the performance and life span

of the sand filter; take adequate precautions to protect the sand

filter from unnecessary wear and tear that may occur during

periods of cold or hot weather and/or exposure to sun.

• Please examine and verify all sand filter components are present

before use. Notify Bestway at the customer service address listed

on this manual for any damaged or missing parts at the time of

purchase.

• It is imperative to change as soon as possible all deteriorated

parts. Only use parts approved by the manufacturer.

• Do not allow children or adults to lean or sit on the apparatus.

• Do not add chemicals to the sand filter.

• When chemical products are used to clean the pool water, it is

recommended to respect a minimum filtration time to preserve the

health of swimmers which depends on compliance of health

regulation.

• Only the media provided or specified by the manufacturer is to be

used with product installation.

• It is essential to check that the suction openings are not obstructed.

• It is advisable to stop the filtration during maintenance operations

on the filtration system.

• Regularly monitor the filter clogging level.

• A weekly check is recommended for backwashing or

cleaning. Minimum daily filtration operating time of 8 hours is

recommended to ensure clear pool water.

• It is essential to change any damaged element or set of

elements as soon as possible. Use only parts approved by

person responsible for placing the product on the market.

• All filters and filter media shall be inspected regularly to

ensure that there is not a build-up of detritus thus preventing

good filtration. The disposal of any used filter media should

also be in accordance with applicable regulations/legislation.

• Mind all the safety requirements and recommendations

described in the manual. In case of doubt on the pump or

any circulation devices, contact a qualified installer, or the

manufacturer/importer/distributor. The water circulation

installation shall comply with the European as well as

national/local regulations, especially when dealing with

electrical issues. Any change of valve position, pump size,

grille size can cause a change of the flow and the suction

velocity can be increased.

• This product is not intended for commercial use.

Please read the instruction manual carefully and

keep it for future reference.

SAVE THESE INSTRUCTIONS

>3.5 m

POOL

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

SAFETY INSTRUCTIONS

WARNING

IMPORTANT SAFETY INSTRUCTIONS - READ AND FOLLOW

ALL SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS

When installing and using this electrical equipment, basic safety

precautions should always be followed, including the following:

• The pump is to be supplied by an isolating transformer or

supplied through a residual current device (RCD)having a rated

residual operating current not exceeding 30 mA.

• The power source on the wall of building should keep more than

4 m away from pool.

• The appliance must be supplied by earthed power source.

• RISK OF ELECTRIC SHOCK - The pump cannot be using

while people are inside the pool. Forbid the access of the pool

in case of damage of the sand filter.

• DO NOT BURY CORD. Locate cord to minimize abuse from

lawn mowers, hedge trimmers, and other equipment.

• To reduce the risk of electric shock, replace damaged cord

immediately.

• If the supply cord is damaged, it must be replaced by the

manufacturer, its service agent or similarly qualified persons in

order to avoid a hazard.

• Extension cords can’t be used.

• Risk of electric shock. Using the sand filter with an unmatched

electrical supply is dangerous and will permanently damage the

sand filter.

• Do not remove the grounding prong or modify the plug in

anyway. Do not use adaptor plugs. Consult a qualified

electrician for any questions relating to validity of your plugs or

grounding.

• Handle the sand filter with care. Do not pull or carry the sand

filter by the power cord. Never pull a plug from the outlet by

yanking the power cord. Keep cord free from abrasions. Sharp

objects, oil, moving parts, and heat should never be exposed to

the sand filter.

• Always unplug this product from the electrical outlet before

removing, cleaning, servicing or making any adjustment to the

product.

• Don’t plug or unplug the appliance if hand is wet.

• Always unplug the appliance:

• On raining days

• Before cleaning or other maintenance

• Leave it unattended on holidays

• When the appliance will be not used for long time, such as in

the winter, the pool set should be disassembled and stored

indoor.

• CAUTION: Read the instruction before using the appliance

and installation/reassembly every time.

• Safekeeping the instruction. For reconstruction the pool set

every time, please always refer to the instructions.

• If instruction is missed, please contact with Bestway or search it

in website: www.bestwaycorp.com

• Electric installations should follow national wiring rules. Consult

a qualified electrician for any questions.

CAUTION: This sand filter is for use with storable pools only.

Do not use with permanently-installed pools. A storable pool is

constructed so that it is capable of being readily disassembled for

storage and reassembled to its original integrity. A

permanently-installed pool is constructed in or on the ground or in

a building such that it cannot be readily disassembled for storage.

• This appliance can be used by children aged from 8 years and

above and persons with reduced physical, sensory or mental

capabilities or lack of experience and knowledge if they have

been given supervision or instruction concerning use of the

appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance. Cleaning and user

maintenance shall not be made by children without supervision.

• Cleaning and user maintenance must be performed by an adult

above 18 years old who is familiar with the risk of electric shock.

NOTES:

• Place the sand filter on solid, level ground.

Ensure the sand filter is at least 3.5 meters

away from poolside. Keep distance as far as

possible.

• Pay attention to position pool and sand filter so

adequate ventilation, drainage, and access for

maintenance is available. Never place the

filter in an area that may accumulate water, or on a walking path

with lots of foot traffic.

• It is necessary to have the plug accessible after installation of the

pool. The plug of the sand filter shall be at least 3.5 m away from

the pool.

• Atmospheric conditions may affect the performance and life span

of the sand filter; take adequate precautions to protect the sand

filter from unnecessary wear and tear that may occur during

periods of cold or hot weather and/or exposure to sun.

• Please examine and verify all sand filter components are present

before use. Notify Bestway at the customer service address listed

on this manual for any damaged or missing parts at the time of

purchase.

• It is imperative to change as soon as possible all deteriorated

parts. Only use parts approved by the manufacturer.

• Do not allow children or adults to lean or sit on the apparatus.

• Do not add chemicals to the sand filter.

• When chemical products are used to clean the pool water, it is

recommended to respect a minimum filtration time to preserve the

health of swimmers which depends on compliance of health

regulation.

• Only the media provided or specified by the manufacturer is to be

used with product installation.

• It is essential to check that the suction openings are not obstructed.

• It is advisable to stop the filtration during maintenance operations

on the filtration system.

• Regularly monitor the filter clogging level.

Meaning of crossed-out wheeled dustbin:

Do not dispose of electrical appliances as unsorted municipal

waste, use separate collection facilities. Contact your local

government for information regarding the collection systems available.

If electrical appliances are disposed of in landfills or dumps,

hazardous substances can leak into the groundwater and get into the

food chain, damage your health and well-being.

When replacing old appliances with new ones, the retailer is legally

obligated to take back your old appliance for disposals at least free of

charge.

PUMP DISPOSAL

• A weekly check is recommended for backwashing or

cleaning. Minimum daily filtration operating time of 8 hours is

recommended to ensure clear pool water.

• It is essential to change any damaged element or set of

elements as soon as possible. Use only parts approved by

person responsible for placing the product on the market.

• All filters and filter media shall be inspected regularly to

ensure that there is not a build-up of detritus thus preventing

good filtration. The disposal of any used filter media should

also be in accordance with applicable regulations/legislation.

• Mind all the safety requirements and recommendations

described in the manual. In case of doubt on the pump or

any circulation devices, contact a qualified installer, or the

manufacturer/importer/distributor. The water circulation

installation shall comply with the European as well as

national/local regulations, especially when dealing with

electrical issues. Any change of valve position, pump size,

grille size can cause a change of the flow and the suction

velocity can be increased.

• This product is not intended for commercial use.

Please read the instruction manual carefully and

keep it for future reference.

SAVE THESE INSTRUCTIONS

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

SPECIFICATIONS

Filter Diameter:

Effective Filter Area:

Max. Operating Pressure:

Working sand filter pressure:

Max. Water Temperature:

Sand:

Sand Size:

Sand Capacity:

480 mm

0.181 m2(1.95 ft2)

1.59 Bar (23 PSI)

<0.55 Bar (8 PSI)

35°C

Not included

#20 silica sand,0.45-0.85 mm

Approximately 55 kg

480 mm

690 mm

745 mm

PARTS REFERENCE OVERVIEW

Before assembling the sand filter, take a few minutes to

become familiar with all the sand filter parts.

P03831

P61138ASS16

P03832

P61209ASS16

P03819

P03820

P61211ASS16

P6581ASS16

P6580ASS16

P03818

P6614ASS16

P6029ASS16

P03830

P61214ASS16

P61210ASS16

P03829

P6916ASS16

P6124ASS16

P6561ASS16

P6562ASS16

P6563ASS16

P03815

P03849

P6028FRASS16

P61322ASS16

P61318ASS16

P6643ASS16

REF.NO

SPARE PART NO.

P61322 P61318

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Assembly (You will need a screwdriver.)

1.Carefully remove all components from the package and

check to ensure nothing is damaged. If

equipment is damaged, immediately notify

the retailer from where the equipment was

purchased.

2.The sand filter should be placed on solid,

level ground, preferably a concrete slab.

Position the sand filter so the Ports and Control Valve are

acces sible for operation, servicing and winterizing.

3.EN60335-2-41 TEST standard requires the sand filter must

be vertically fixed on ground or a certain pedestal made of

wood or concrete before use to prevent the sand filter from

accidental falling. Fully assembled sand filter will exceed

18 kg. The mounting holes should be 8 mm in diameter and

spaced 86 mm apart. Use two bolts and nuts with a

maximum of 8 mm in diameter to fasten the sand filter to the

pedestal.

Load pool-grade filter sand/Flowclear™

Polysphere.

NOTE: Use only special pool-grade filter sand, free of all

limestone or clay: #20 Silica sand 0.45-0.85 mm,

approximately one 55 kg bag should suffice. If you do not

use the recommended size of filter sand, filtering

performance will be reduced and the sand filter may

damaged, thereby voiding the warranty.

NOTE: To avoid damaging the Skimmer when adding

sand, pour some water into the Bottom Tank to submerse

the Skimmer on the Hub.

NOTE: Sand/Flowclear™ Polysphere not

included.

NOTE: Use 28 g (0.06 lbs) Flowclear™ Polysphere to

replace 1 kg (2.20 lbs) sand.

Ф8 mm

86 mm

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

MAX.

MIN .

#20

0.45-0.85 mm

MAX

MIN

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Connect to the pool

P61318 P61322

P6916

Garden hose (not

included)

For Drain, Backwash,

Rinse function

For pool with 32 mm valves

Before switching on, please read the manual carefully.

STOP

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

RCD Test

A. Insert the plug into the

power outlet.

B. Press the “RESET”

button; the indicator light turns red.

NOTE: If the indicator light is not on, the test has failed.

C. Press the “T” button; the indicator light turns off.

NOTE: If the indicator light is not off, the test has failed.

D. Press the “RESET” button, the indicator light turns

red, and the sand filter is ready for use.

WARNING: RISK OF ELECTRIC SHOCK. The

RCD plug must be tested before each use.

WARNING: Do not use the sand filter if this test fails.

Please contact your local Bestway Aftersales Service.

WARNING: Insert the RCD plug into a residual current

device (RCD) having a rated residual operating not

exceeding 30 mA.

WARNING: Before inserting plug into a power outlet,

make sure the current rate of the power outlet is suitable

for the sand filter.

A B C D

OPERATION

Timer

1. Plug into power source,

adjust power switch to

“ON” (-) position. The

sand filter will begin

working immediately.

2. Adjust power switch to

“OFF” (0) position. The

sand filter will stop working immediately.

3. After turning on, you can adjust work time, rest time

and cycle time by turning the knob to desired position.

See the table below for more details.

4. When the timer knob is moved into new position, the

filter’s previous cycle automatically cancels so new

cycle can begin.

5. Each time the filter is powered on or restarted, a new

cycle will begin based on timer knob position.

NOTE: If the knob is adjusted to the 24-hour position

(24), the sand filter will work continuously without any

rest period.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Knob Position Working time(H) Rest time(H) Cycle period(H)

CONTROL VALVE OVERVIEW

WARNING: To prevent equipment

damage and possible injury, always

switch off sand filter before changing

the Control Valve function. Changing

valve positions while the pump is

running can damage the Control

Valve, which may cause personal injury or property

damage.

How to Use the Control Valve:

Press down on the Control Valve handle and rotate to

desired function.

OPERATION

Timer

1. Plug into power source,

adjust power switch to

“ON” (-) position. The

sand filter will begin

working immediately.

2. Adjust power switch to

“OFF” (0) position. The

sand filter will stop working immediately.

3. After turning on, you can adjust work time, rest time

and cycle time by turning the knob to desired position.

See the table below for more details.

4. When the timer knob is moved into new position, the

filter’s previous cycle automatically cancels so new

cycle can begin.

5. Each time the filter is powered on or restarted, a new

cycle will begin based on timer knob position.

NOTE: If the knob is adjusted to the 24-hour position

(24), the sand filter will work continuously without any

rest period.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

NOTE:

• Be sure all provisions for wastewater disposal meet

applicable local, state or national codes. Do not discharge

water where it will cause flooding or damage.

Backwash: This function is used to clean the

sand bed; water is pumped down through the

Collector Hub, upwards through the sand bed,

and deposited out of Port D.

Rinse: This function for initial startup, cleaning,

and sand bed leveling after Backwash; water is

pumped downwards through the sand bed, up

through the Collector Hub and deposited out of

the valve Port D.

Circulate: This function circulates pool water

bypassing the sand filter; use this function if the

filter is broken to collect debris in the Debris

Screens.

Drain: This function drains water from the pool;

another filter bypass setting, water is pumped

and deposited out of Port D, instead of returning

it to the pool.

Closed: This function stops water flowing

between the sand filter and the pool.

Filter: This function is used to filter pool water

and should be positioned here 99% of the time.

Water is pumped through the sand filter, where

it is cleaned and returned to the pool.

• When the Control Valve is set to the Backwash, Rinse, or

Drain position, water will discharge from Port D on the

Control Valve.

• Do not switch on or operate the sand filter with the Control

Valve set to the Closed function or it will seriously damage

the sand filter.

• Do not set the Control Valve between two functions, or it will

lead to leaking.

• To avoid water leakage, screw the Port D Cap onto the

Control Valve Port D before operating the filter or circulate

function.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Air Release

Press down the control valve handle and wait untill the

water flow from Port D to release the air.

NOTE: It is important to repeat this operation every time

you start the pump after winterizing, maintenance and

backwashing the sand bed.

FIRST TIME USE INSTRUCTIONS

Backwash and Rinsing must be performed to

prepare the pump for its first use and to wash the

sand.

CAUTION: DO NOT DRY RUN THE SAND FILTER

1. Press down on the Control Valve handle and rotate to the Backwash

function.

2. Plug in and run the sand filter for 3-5 minutes, or until the water runs

clear.

3. Switch off the sand filter and set the Control Valve to the Rinse

function.

4. Switch on the sand filter and run the sand filter for 1 min. This

circulates water backwards through the sand filter and drains water out

Port D.

5. Switch off the sand filter. Set the Control Valve to the Closed function.

6. Top up pool water if required.

IMPORTANT: This procedure removes water from the pool, which

you’ll need to replace.

Switch off the sand filter immediately if water levels near the pool’s Inlet

and Outlet valves.

Backwash Rinsing

NOTE:

• Be sure all provisions for wastewater disposal meet

applicable local, state or national codes. Do not discharge

water where it will cause flooding or damage.

• When the Control Valve is set to the Backwash, Rinse, or

Drain position, water will discharge from Port D on the

Control Valve.

• Do not switch on or operate the sand filter with the Control

Valve set to the Closed function or it will seriously damage

the sand filter.

• Do not set the Control Valve between two functions, or it will

lead to leaking.

• To avoid water leakage, screw the Port D Cap onto the

Control Valve Port D before operating the filter or circulate

function.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

1. Now the sand filter is ready for use. Set the Control Valve

to the Filter function.

NOTE: To prevent the risk of electrical shock dry any excess

water from yourself and the sand filter.

IMPORTANT: Before operation, make sure the tank is

placed steadily on its base and connected correctly to the

pump.

2. Switch on the sand filter to run it.

NOTE: The sand filter has now started its

filtering cycle. Check that water is returning

to the pool and take note of the filter

pressure on Pressure Gauge. Generally, the

recommended sand filter pressure is less

than 0.56 Bar (8.0 PSI) when it is running.

Sand Filter

Maintenance

CAUTION: You must ensure the sand

filter is switched off and unplugged before

any maintenance begins or severe risk of

injury or death exists. As dirt builds up in the

sand filter, the pressure reading on Pressure Gauge will

increase. When the Pressure Gauge is 0.62 Bar (9.0 PSI) or

higher, or water flow to the pool is too low, it is time to clean

the sand. To clean the sand bed, follow all instructions

outlined previously in: Backwash and Rinsing.

NOTE:

1. The Pressure Gauge is just used for measuring the water

pressure, not used for precision measurement.

2. We recommend you clean the sand bed once a month or

less regularly depending on how often the pool is used. Do

not clean the sand too frequently.

1.6

10 15

1.4

1.2

0.8

0.6

0.4

0.2

psi

bar

1.6

10 15

1.4

1.2

0.8

0.6

0.4

0.2

psi

bar

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Cleaning the Strainer

1. Switch off the sand filter and set the Control Valve to the

Closed function.

2. Close the connection valves.

3. Remove the Strainer Cover by

unscrewing it.

4. Take out the Strainer, remove any debris.

5. Put the Strainer back into position.

Ensure the hole in the strainer is aligned.

6. Ensure the Seal Ring is in place. Secure

the Strainer Cover back.

7. Open the connection valves.

NOTE: The Strainer must be emptied and

cleaned periodically. A dirty or blocked

strainer will reduce the performance of the

sand filter.

Lowering or Draining Pool Water

1. Switch off the sand filter and set Control Valve to the Drain

function.

2. Detach the Hose from the pool’s Port A and sand filter Port

A and attach to Port D.

3. Switch on the sand filter and press the “RESET” button to

run the filter and remove the pool water.

WARNING: DO NOT DRY RUN THE SAND FILTER.

Winterization and long-term storage

In areas that have freezing winter temperatures, pool

equipment must be winterized to protect against damage.

Allowing water to freeze will damage the sand filter and void

warranty.

1. Backwash the sand filter.

2. Drain the pool according to the pool owner’s manual.

3. Unscrew the drain valve cap at the bottom of the tank and

release the remaining water.

4. Disconnect the two Hoses from the pool and the sand filter.

5. Completely spill the sand out of the tank and dry all

components.

6. Move away sand filter from pool area, store the sand filter

in a dry indoor location out of child’s reach.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

Lowering or Draining Pool Water

1. Switch off the sand filter and set Control Valve to the Drain

function.

2. Detach the Hose from the pool’s Port A and sand filter Port

A and attach to Port D.

3. Switch on the sand filter and press the “RESET” button to

run the filter and remove the pool water.

WARNING: DO NOT DRY RUN THE SAND FILTER.

Winterization and long-term storage

In areas that have freezing winter temperatures, pool

equipment must be winterized to protect against damage.

Allowing water to freeze will damage the sand filter and void

warranty.

1. Backwash the sand filter.

2. Drain the pool according to the pool owner’s manual.

3. Unscrew the drain valve cap at the bottom of the tank and

release the remaining water.

4. Disconnect the two Hoses from the pool and the sand filter.

Problems Probable Causes Solutions

Sand is flowing

to the pool

No water flow

Excessive filter

pressure

Control Valve leaks

from the port D

Connectors leak

TROUBLESHOOTING

- Sand is too small

- Move the control valve from the

backwash to the filter function without

stop the sand filter

- The level of the sand is too high

- The skimmer is broken

- Stopper plugs were not removed

- Air was not released

- The control valve is set to Closed

- The strainer is blocked

- Sand filter broken

- Dirty filter

- Calcified sand bed

- Insufficient backwashing

- The pressure gauge is broken

- Control Valve is set between two

functions

- The gasket is broken

Washer of the connectors not in place

- Washer of the connectors broken

- Loose Hoses

- Recommend 0.45 mm to 0.85 mm #20

silica sand

- Stop the sand filter every time set the

control valve

- Check if the level of the sand is between

the marked “MAX” and “ MIN” on the

collector hub

- Replace the skimmer

- Remove the stopper plugs and insert the

debris screens

- Release the air

- Set to filter function

- Clean the strainer

- Call for service

- Backwash

- Inspect sand and change if necessary

- Backwash until water runs clear

- Replace the pressure gauge

- Set to one function

- Replace the gasket

- Reposition the washer

- Replace the washer

- Tighten them

5. Completely spill the sand out of the tank and dry all

components.

6. Move away sand filter from pool area, store the sand filter

in a dry indoor location out of child’s reach.

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书英

SICHERHEITSANWEISUNGENACHTUNG

WICHTIGE SICHERHEITSANWEISUNGEN BITTE LESEN

UND BEACHTEN SIE ALLE SICHERHEITSBESTIMMUNGEN.

Bei der Installation und der Benutzung von elektrischen Geräten müssen

die grundlegenden Sicherheitsbestimmungen einschließlich der

folgenden immer beachtet werden:

• Die Pumpe muss über einen Trenntransformator oder über eine

Fehlerstrom-Schutzeinrichtung (RCD) mit einem Ansprechdifferenzstrom von

nicht mehr als 30mA versorgt werden.

• Die Stromquelle muss mindestens 4 m vom Pool entfernt sein.

• Das Gerät muss von einer geerdete Stromquelle mit Spannung versorgt

werden

• ELEKTROSCHOCKGEFAHR - Die Pumpe darf nicht betrieben werden,

wenn sich Personen im Pool aufhalten. Bei defektem Sandfilter darf der Pool

nicht genutzt werden.

• VERGRABEN SIE KEINE KABEL. Verlegen Sie die Kabel so, dass die

Gefahr einer Beschädigung durch Rasenmäher, Heckenscheren usw.

vermieden wird.

• Ersetzen Sie beschädigte Kabel sofort, um jede Gefahr von elektrischen

Schlägen zu vermeiden.

• Falls das Netzkabel beschädigt ist, muss es durch den Hersteller, den

Kundendienst oder in entsprechender Weise qualifizierte Person

ausgewechselt werden, um die Gefahr von Stromschlägen zu vermeiden.

• Es können keine Verlängerungskabel verwendet werden.

• Elektroschlaggefahr. Der Einsatz des Sandfilters mit einer ungeeigneten

Stromversorgung ist gefährlich und kann zu schweren Funktionsstörungen des

Sandfilters führen.

• Entfernen Sie den Erdungsleiter nicht und nehmen Sie keine Änderungen am

Stecker vor. Verwenden Sie keine Adapterstecker. Lassen Sie die Erdung

303021216278_58486_14x21cm_3000Gal 德规砂滤器说明书德

Ihrer Steckdosen von einem qualifizierten Elektriker überprüfen.

• Behandeln Sie den Sandfilter vorsichtig. Ziehen oder tragen Sie den Sandfilter

nicht am Netzkabel. Ziehen Sie den Stecker nie mit dem Netzkabel aus der

Steckdose. Schützen Sie das Kabel vor Beschädigungen. Der Sandfilter muss

vor scharfkantigen Gegenständen, Öl, beweglichen Teilen und Hitze geschützt

werden.

• Trennen Sie dieses Produkt immer von der Stromversorgung, bevor Sie es

ausbauen, reinigen, warten oder Einstellungen daran vornehmen.

• Stecken Sie das Gerät nicht mit nassen Händen ein oder aus.

• Stecken Sie das Gerät immer aus:

• An Regentagen

• Bevor Reinigungs- oder Wartungsarbeiten durchgeführt werden.

• wenn Sie das Produkt für einen längeren Zeitraum unbeaufsichtigt lassen

(z. B. während des Urlaubs)

• Wird das Gerät für einen längeren Zeitraum nicht benutzt (z. B. im Winter),

muss das Poolset demontiert und in Innenräumen gelagert werden.

• Vorsicht: Bitte lesen Sie diese Anweisungen jedes Mal sorgfältig durch,

bevor Sie das Gerät benutzen und installieren/montieren.

• Bewahren Sie diese Anweisungen sorgfältig auf. Beachten Sie bei jedem

erneuten Aufbau des Pools diese Anweisungen.

• Sollten diese Anweisungen verloren gehen, kontaktieren Sie Bestway oder

suchen Sie das Dokument auf unserer Website: www.bestwaycorp.com

• Elektrische Installationen sollten die nationalen Anschlussvorschriften

beachten. Lassen Sie sich von einem qualifizierten Elektriker in allen Fragen

beraten.

ACHTUNG: Dieser Sandfilter wurde ausschließlich für die Benutzung in

lagerbaren Pools konzipiert. Nicht in fest installierten Pools benutzen. Ein

lagerbarer Pool ist so konstruiert, dass es zur Lagerung abgebaut und

anschließend wieder aufgebaut werden kann. Ein fest installierter Pool ist so

konstruiert, dass es nicht für die Lagerung abgebaut werden kann.

• Dieses Gerät kann von Kindern ab 8 Jahren oder älter sowie von Personen mit

physischen, sensorischen oder mentalen Einschränkungen oder mangelnder

Erfahrung und mangelnden Kenntnissen benutzt werden, sofern sie

entsprechend beaufsichtigt oder mit der Bedienung des Gerätes und den damit

verbundenen Gefahren vertraut gemacht wurden. Kinder dürfen nicht mit dem

Gerät spielen. Die Reinigung und Wartung durch den Benutzer darf von

Kindern nicht ohne Beaufsichtigung durchgeführt werden.

• Reinigung und Wartung durch den Benutzer müssen von einem mindestens 18

Jahre alten Erwachsenen durchgeführt werden, der mit den Gefahren eines

elektrischen Schlages vertraut ist.

HINWEIS:

• Setzen Sie den Sandfilter auf eine feste und ebene

Unterlage. Bitte stellen Sie sicher, dass sich der

Sandfilter zumindest 3.5m vom Rand des Pools

entfernt befindet. Halten Sie so viel Abstand wie

möglich.

• Achten Sie darauf, dass die Position des Pools und

des Sandfilters eine angemessene Lüftung, die

Dränage und den Zugang für die Wartung gewährleistet. Positionieren Sie den

Sandfilter nie an einer Stelle, an der sich Wasser ansammeln kann oder wo er

den Verkehr stört.

• Die Steckdose muss nach der Installation des Pools zugänglich sein. Die

Steckdose des Sandfilters sollte zumindest 3,5m vom Pool entfernt sein.

• Die Witterungsbedingungen können sich auf die Leistung und die Lebensdauer

des Sandfilters auswirken; schützen Sie den Sandfilter in geeigneter Weise vor

unnötigem Verschleiß bei kalter oder heißer Witterung und/oder

Sonnenaussetzung.

• Bitte prüfen Sie alle Komponenten des Sandfilters vor der Benutzung. Bitte

wenden Sie sich an den Bestway-Kundendienst unter der im Handbuch

angegebene Adresse, falls beim Kauf Teile fehlen oder beschädigt sind.

• Defekte Teile müssen unverzüglich ausgetauscht werden. Verwenden Sie

ausschließlich vom Hersteller empfohlene und zugelassene Teile.

• Stellen Sie sicher, dass sich niemand gegen das Gerät lehnt oder darauf setzt.

• Füllen Sie keine Chemikalien in den Sandfilter ein.

• Wenn Chemikalien zum Reinigen des Poolwassers eingesetzt werden,

empfehlen wir aus gesundheitlichen Gründen und zur Einhaltung von

Vorschriften die Einhaltung einer minimalen Filtrierungszeit.

• Bei der Produktinstallation sind nur die vom Hersteller gelieferten oder

angegebenen Medien zu verwenden.

• Es ist unbedingt notwendig zu prüfen, dass die Ansaugöffnungen nicht

blockiert sind.

• Es ist empfehlenswert, die Filterung während der Wartungseingriffe auf dem

Filtersystem zu stoppen.

• Regelmäßig das Verstopfen des Filters überwachen.

• Es wird eine wöchentliche Kontrolle für Rückspülen oder Reinigung empfohlen.

Die tägliche Mindestfilterbetriebsdauer von acht Stunden wird empfohlen, um

sauberes Poolwasser zu garantieren.

• Es ist unbedingt notwendig, jegliche beschädigten Elemente oder

Elementgruppen so schnell wie möglich zu ersetzen. Verwenden Sie nur von

der Person, die das Produkt auf den Markt gebracht hat, empfohlen Teile.

• Alle Filter und Filtermedien müssen regelmäßig untersucht werden, um

sicherzustellen, dass keine Schmutzansammlungen vorliegen, die eine

korrekte Filterung verhindern. Die Entsorgung jeglicher gebrauchten

Filtermeiden muss in Einklang mit den geltenden Vorschriften/Gesetzen

erfolgen.

• Beachten Sie alle im Handbuch beschriebenen Sicherheitsvorschriften und

Empfehlungen. Im Fall von Zweifeln hinsichtlich der Pumpe oder

Umwälzvorrichtungen wenden Sie sich bitten an einen Installationsfachmann

oder an den Hersteller/Importeur/Händler. Die Installation der

Wasserzirkulation muss im Einklang mit den europäischen sowie den

nationalen/lokalen Bestimmungen erfolgen, insbesondere wenn es sich um

elektrische Fragen handelt. Jegliche Änderungen der Ventilposition,

Pumpen-oder Gittergröße kann zu einer Änderung des Durchflusses und einer

Erhöhung der Ansauggeschwindigkeit führen.

• Dieses Produkt darf nicht für kommerzielle Zwecke benutzt werden.

Bitte lesen Sie das Handbuch sorgfältig durch und

bewahren Sie es als künftige Referenz auf.

BEWAHREN SIE DIESE ANWEISUNGEN AUF

SANDFILTERANLAGE

GEBRAUCHSANLEITUNG

Besuchen Sie den YouTube-Kanal von Bestway

FRAGEN? PROBLEME?

FEHLENDE TEILE?

Wegen FAQs, Bedienungsanleitungen, Videos

oder Ersatzteilen besuchen Sie bitte

bestwaycorp.com/support

GESCHÄFT ZURÜCKGEBEN