Better Homes and Gardens Canton BHS336158813011 User manual

THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION.
PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Date 2023-04-12 Rev. 0001-A
Canton Coffee Table
Stock # BHS336158813011
ADULT ASSEMBLY REQUIRED
If you have any questions regarding assembly or if parts are missing, DO NOT return this item to the
store where it was purchased. Please call our customer service number and have your instructions and
parts list ready to provide the model name, part name or factory number:
1-866-942-5362
Pacific Standard Time: 8:30 a.m. - 4:30 p.m., Monday - Friday
Or visit our web site 24 hours a day, 7 days a week for product assistance at
www.whalenstyle.com
Or e-mail your request to [e-mail]
LOT NUMBER:
DATE PURCHASED: / /

2
MANUFACTURER: Whalen Furniture Manufacturing
CATALOG: Canton Coffee Table
MODEL # BHS336158813011
SPECIAL NOTE
Please read the instruction sheets completely before assembly. Examine all packaging
material before discarding carton. Remove any remaining staples from the carton before
discarding. Remove all parts from carton and separate into groups as indicated on part
list. Please ensure all parts are included prior to assembly. Use of power tools to
complete assembly is not recommended.
M A X I M U M R E C O M M E N D
E D W E I G H T
L O
A D S
MAXIMUM LOAD 90.7 kg / 200 lb.
THIS UNIT IS INTENDED ONLY FOR USE WITHIN THE MAXIMUM
WEIGHTS INDICATED. USE WITH LOAD HEAVIER THAN THE MAXIMUM WEIGHTS
INDICATED MAY RESULT IN INSTABILITY, CAUSING POSSIBLE INJURY.

3
IMPORTANT
Before you begin: Open, identify and count all parts prior to assembly. Lay out parts on a flat and
non-abrasive surface. You will need the parts identified on page 4 and 5 of this instruction manuals.
NOTE: IT IS VERY IMPORTANT TO USE GLUE WITH DOWELS. EXCESS GLUE CAN BE WIPED
OFF WITH DAMP CLOTH.
Insert the dowel at least halfway by tapping lightly with a rubber mallet, IF NECESSARY.
CAM LOCK SYSTEM OPERATION
HOW THE KNOCK DOWN (KD) ASSEMBLY SYSTEM WORKS
1. Screw the Cam Bolt into the threaded inserts on the panel. Connect both panels together; making sure Cam
Bolt goes into the pre-drilled hole on the end of panel for Cam Lock.
2. Insert the Cam Lock into the pre-drilled large hole on the panel. Make sure the arrow on the face of Cam
Lock faces out and points towards Cam Bolt.
3. Take a Phillips screwdriver and rotate the Cam Lock clockwise to lock the Cam Bolt in place.
4. Stick the PVC stickers on the Cam Lock to conceal the Cam.
You are now ready to assemble the KD unit.
GLUE
FINAL
1 2 43
13

4
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
A-Table Top (Qty. 1)
B- Pedestal C- Decor
(Qty. 1) (Qty. 2)
D- Upper Base E- Lower Base
(Qty. 1) (Qty. 1)

5
Parts and Hardware List
Please read completely through the instructions and verify that all listed parts and hardware are present
before beginning assembly.
(1) Cam Lock (2) Cam Bolt
(Qty. 22+1 extra) (Qty. 22+1 extra)
(3) M8 x 30 mm Wood Dowel (4) 1/4” x 45 mm Bolt
(Qty. 12+1 extra) (Qty. 4+1 extra)
(5) Lock Washer (6) Flat Washer (7) PVC Sticker
(Qty. 4+1 extra) (Qty. 4+1 extra) (Qty. 22+1)
Hex Wrench Glue Touch-up Pen
(Qty. 1) (Qty. 1) (Qty. 1)
Tools required: Hex wrench (provided) and Phillips screwdriver (not provided).

6
Assembly Instructions
NOTE: Please do not fully tighten all cam locks and bolts until you finish assembling all parts. Once
assembled, go back and fully tighten all cam locks and bolts. This will make the assembly easier.
1. Unpack the unit and confirm that you have all the hardware and required parts listed. Assemble the unit
on a carpeted floor or the empty carton to avoid any scratch.
2. Securely screw the Cam Bolts (2) into the designated small holes on the Table Top (A) using a Phillips
screwdriver. DO NOT over tighten the cam bolts.
② x 8
2
A

7
Assembly Instructions
3. Securely screw three Cam Bolts (2) into the designated small holes on each side of Pedestal (B) using a
Phillips screwdriver.
② x 6
2
B
B

8
Assembly Instructions
4. Glue the Wood Dowels (3) into the inner holes of the Decors (C) as shown.
NOTE: It is very important to use a small amount of glue on both ends of dowels and wipe away the
excess glue immediately with a damp cloth.
3
3
3
C
3
C
③ x 4

9
Assembly Instructions
5. Orient and attach the Decors (C) to the Pedestal (B) by engaging 6 Cam Locks (1). (Refer to page 3 on
Cam Lock system operation supplement).
B
C
1
B
C
C
① x 6

10
Assembly Instructions
6. Glue four Wood Dowels (3) into the bottom inner holes on the assembled pedestal.
③ x 4
3
B
C
C
3
3
3

11
Assembly Instructions
7. Combine the Upper and Lower Bases (D and E) together and fasten them into place with four 45 mm
Bolts (4), four Lock Washers (5) and four Flat Washers (6).
④ x 4 ⑤ x 4 ⑥ x 4
4
5
6
D
E

12
② x 8
Assembly Instructions
8. Turn the assembled base upright and securely screw the Cam Bolts (2) into the designated small holes
on the assembled base using a Phillips screwdriver.
2
E
D

13
D
E
BC
C
B/C
D/E
1
Assembly Instructions
9. Using the wood dowels as a guide, align and attach the pedestal assembly to the Bases (D and E) by
engaging 8 Cam Locks (1).
① x 8

14
Assembly Instructions
10. Glue four Wood Dowels (3) into the inner holes on the top of both Pedestal and Decors (B and C).
③ x 4
3
C
3
3
3
BC

15
Assembly Instructions
11. Align and attach the pedestal assembly to the Table Top (A) by engaging 8 Cam Locks (1).
BC
C
A
B/C
A
1
① x 8

16
Assembly Instructions
12. Ask for assistance to turn the assembled unit upright and position it near the final location.
13. Affix the PVC Stickers (7) onto the visible cam locks to conceal the cams.
⑦x 22
B
C
C
7
7

17
Assembly Instructions
14. If necessary, adjust the floor levelers pre-attached underneath the Bases (D and E) to level the unit.
Floor leveler
D / E

18
Care and Maintenance
 Use a soft, clean cloth that will not scratch the surface when dusting.
 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.
 Using solvents of any kind on your furniture may damage your furniture’s finish.
 Never use water to clean your furniture as it may cause damage to the finish.
 Always use coasters under beverage glasses and flowerpots.
 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.
 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create
spotting within the furniture finish.
 In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a
professional to repair your furniture.
 Check bolts/screws periodically and tighten them if necessary.
Further Advice about Wood Furniture Care
It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity
changes can cause fading, warping, shrinking and splitting of wood. It is advised to keep furniture away from
direct sunlight as sun may damage the finish.
Proper care and cleaning at home will extend the life of your purchase. Following these important and helpful
tips will enhance your furniture as it ages.
A touch-up pen has been provided to minimize the small nicks or scratches that may occur during
assembly or shipping.
We hope you enjoy your purchase for many years.
Thank you for your purchase!
QUALITY GUARANTEE
We are confident that you will be delighted with your Whalen Furniture purchase.
Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace
it for up to one (1) year from date of purchase. Every Whalen Furniture product is designed to meet your
highest expectations. We guarantee that you will immediately see the value of our fine furniture.
This warranty gives you specific legal rights and you may also have other rights which vary from State to State.
Whalen Furniture Manufacturing
1578 Air Wing Road, San Diego, CA 92154, USA
Customer Service: 1-866-942-5362
8:30 a.m. - 4:30 p.m., PST, Monday to Friday
www.whalenstyle.com

ESTE INSTRUCTIVO CONTIENE INFORMACION IMPORTANTE DE SEGURIDAD.
POR FAVOR LEA Y MANTENGA PARA USO FUTURO.
Fecha 2023-04-12 Rev. 0001-A
Mesa central Canton
Modelo # BHS336158813011
ENSAMBLE REQUERIDO POR ADULTO
Si tienen alguna pregunta acerca del ensamble o si alguna parte está faltante, no retorne esté producto a
la tienda donde lo compro. Por favor llame a nuestro departamento de ayuda al cliente teniendo su
instructivo y lista de partes para proveer el modelo, nombre de parte o el número de fábrica:
1-866-942-5362
Hora estándar del Pacífico: 8:30 a.m. - 4:30 p.m., de Lunes a Viernes
O visite nuestra página de Internet 24 horas al día, 7 días a la semana para asistencia
www.whalenstyle.com
O mande un correo electrónico a [e-mail]
NÚMERO de LOTE:__________
FECHA de COMPRA: / /

2
FABRICANTE: Whalen Furniture Manufacturing
CATALOGO: Mesa central Canton
MODELO # BHS336158813011
NOTA ESPECIAL
Por favor lea todo el instructivo antes de ensamblar. Examinar todo el material de
empaque antes de tirar el cartón. Retirar cualquier grapa del cartón antes de tirar. Retirar
todas las partes del cartón y separar en grupos como es indicado en la lista de partes. Por
favor de asegurar que todas las partes están presentes antes del ensamble. El uso de
herramientas eléctricas para completar el ensamble no es recomendado.
M Á X I M O P E S O R E C O M E N D A D O
CARGA MÁXIMA 90.7 kg / 200 lb.
ESTA UNIDAD DEBE UTILIZARSE CON LOS PESOS MÁXIMOS
INDICADOS. SI SE EXCEDE EL PESO MÁXIMO, PODRÍA RESULTAR EN UNA INESTABILIDAD
DE LA UNIDAD CAUSANDO POSIBLES LESIONES.