Better Homes and Gardens BH18-092-199-50 User manual

Warranty Coverage Requirements:
1. Copy of your Original Store Receipt.
2. Pictures of the damaged parts.
3. You must know the name of your product and any corresponding item
numbers as well as the name of the store where you purchased the item.
4. Please gather all of this informaon BEFORE you call customer service.
DO NOT RETURN TO RETAILER
IF YOU HAVE ANY QUESTIONS OR CONCERNS
PLEASE VISIT OUR WEBSITE
AT:
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
www.yotrioint.com
OR TOLL FREE AT:
1-866-905-4107
1-866-905-4107
1-866-905-4107
1-866-905-4107
MONDAY-FRIDAY 8:30 AM TO 5:00 PM PACIFIC STANDARD TIME / 11:30
AM TO 8:00PM EASTERN STANDARD TIME
YOTRIO
YOTRIO
YOTRIO
YOTRIO CUSTOMER
CUSTOMER
CUSTOMER
CUSTOMER CARE
CARE
CARE
CARE
1

CARE AND MAINTENANCE
Before using, wipe the product completely with a so, dry cloth.
Spot-clean Cushions and slings using a sponge, mild soap and water. Rinse thoroughly with clean water. To
prevent mildew, allow to air dry completely before using or storing.
Never machine wash or tumble dry cushions, slings or umbrella covers as this will result in shrinkage or
damage.
Rinse wicker pao furniture with a hose or pressure washer. If the wicker is really dirty, you can use mild
soap with water. Allow to dry completely before using or storing.
To clean your pao umbrella, use a so brush and mild soap and water. Allow to dry completely before
storing.
Avoid placing hot objects directly onto table top surface without a heat protector.
Always store and/or cover your pao furniture in a cool dry place when not in used and away from direct
sunlight.
When storing, never wrap cushions in plasc. Plasc doesn't allow the cushion to breathe and can cause it
to mildew if there's any moisture present.
Always place your pao furniture away from fire, extreme heat, freezing condions and inclement weather
such as rain, hail, sleet, snow or wind.
Never use bleach or strong solvents to clean as this will cause damage to both fabric and metal finishes.
Do not allow water to build up in frames as this will cause corrosion and damage.
THREE-YEARS FRAME AND ONE-YEAR FABRIC/WICKER/FINISH ETC. LIMITED WARRANTY
You must retain the original receipt to obtain warranty service.
Frames are warranted against defects in materials and workmanship for a period of three years from the
date of original purchase.
This warranty does not cover damage to frames or welds due to commercial use, improper assembly, acts
of nature, fire, freezing and abusive use.
Rust, corrosion, and/ or rust stains are not covered by warranty.
Purchased parts are not covered under this warranty.
Fabric on cushions, slings and umbrella is warranted one year against separaon at the seams.
Fading, mildew, and color discoloraon due to exposure to the elements, chemicals and spills are not
covered.
The Powder coat and/ or paint are warranted one year against blistering, peeling, or crackling.
Fading due to exposure to elements, chemicals and spills is not covered. Scratches and chips due to normal
wear and use are not covered.
Wicker Weave are warranted one year against breakage, separaon, or tearing.
Fading or discoloraon due to exposure from chemicals, spills and/ or the elements is not covered.
Warranty covers free replacement of item within one year of purchase. Aer the one year it remains the
customer's responsibility for freight and packaging charges to and from our service center.
We do not compensate the individual or any outside party for assembling or disassembling the product.
Any replacement of warranted items will be in the original style and color, or similar style and color if the
original is un-available or has been disconnued.
Quesons, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
2

Walmart Assembly Instruction
4PC STEEL CONVERSATION SET
NOTE: Do not completely tighten bolts until all steps are completed.
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
Hardware Contents
PACKAGE CONTENTS
Stock# BH18-092-199-50
3
PART
NO. PICTURE DESCRIPTION QTY
AA M6×15 Bolt &
Washer 16
BB M6×25 Bolt &
Washer 18
CC M6×55 Bolt &
Washer 7
DD Allen Wrench 1
1 loveseat 2 chairs
1 coffee table

Step 2
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
Step 1
Step 1:
Place the right arm (B) on a soft surface.
Attach the chair seat (D) to the right arm (B) with M6 x 25 bolt
& washer (BB).
Loosely tighten by hand.
4
PART
NO. PICTURE DESCRIPTION QTY
2mrAtfeLA
2mrAthgiRB
2kcaBriahCC
2taeSriahCD
2noihsuCG
2wolliPH
Step 2:
Place the left arm (A) on a soft surface.
Attach the pre-assembled part to the left arm (A) with M6 x 25 bolt
& washer (BB).
Loosely tighten by hand.
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET-CHAIR
NOTE: Do not completely tighten bolts until all steps are completed.
Stock# BH18-092-199-50

Step 3 Step 4
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Step 5
Step 4:
Step 3:
Step 5:
Completely tighten all bolts with Allen wrench (DD).
Turn the chair right side up and ensure all connections
are secure before use.
Place the cushion (G) and pillow (H) on the seat.
5
Attach the back to the pre-assembled part.
Insert M6 x 55 bolt & washer (CC) to connect the
chair back (C) and the chair seat (D).
refer to image
Insert the M6 x 15 bolt & washer (AA) to connect the
right arm (B) and the chair back (C).
Insert the M6 x 15 bolt & washer (AA) to connect the
left arm (A) and the chair back (C).
Loosely tighten by hand.
Place the chair with right arm (B) on a soft surface.
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET-CHAIR
NOTE: Do not completely tighten bolts until all steps are completed.
Stock# BH18-092-199-50
refer to image
Loosely tighten by hand.

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Step 1
Step 2 Step 1:
Place the right arm (B) on a soft surface.
Attach the loveseat seat (F) to the right arm (B) with M6 x 25 bolt &
Loosely tighten by hand.
6
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET-LOVESEAT
NOTE: Do not completely tighten bolts until all steps are completed.
Stock# BH18-092-199-50
PART
NO. PICTURE DESCRIPTION QTY
1mrAtfeLA
1mrAthgiRB
1E
1F
2noihsuCG
2wolliPH
loveseat Seat
Loveseat Back
Step 2:
Place the left arm (A) on a soft surface.
Attach the pre-assembled part to the left arm (A) with M6 x 25 bolt &
washer (BB).
Loosely tighten by hand.
washer (BB).

Step 3
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at (866) 905 - 4107, 8:30 a.m. - 5:00 p.m. PST/11:30 a.m. - 8:00 p.m., EST, Monday - Friday.
Step 4
Step 5
Step 3:
Step 5:
Completely tighten all bolts with Allen wrench (DD).
Turn the loveseat right side up and ensure all connections
are secure before use.
Place the cushion (E) and pillow (H) on the seat.
7
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET-LOVESEAT
NOTE: Do not completely tighten bolts until all steps are completed.
Stock# BH18-092-199-50
Step 4:
Place the loveseat with right arm (B) on a soft surface.
Insert the M6×15 bolt & washer (AA) to connect the left
arm (A) and the loveseat back (E).
Loosely tighten by hand.
Attach the loveseat back (E) to the pre-assembled part.
Insert the M6 x 55 bolt & washer (CC) to connect the loveseat
back (E) and loveseat seat (F).
refer to image
Insert the M6 x 15 bolt & washer (AA) to connect the right arm (B)
and the loveseat back (E).
refer to image
Loosely tighten by hand.

Step 1
Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
Step 3
Step 1:
Place the table top (I) upside down on a soft surface.
Insert the M6×15 bolt & washer (AA) to connect the table legs (J)
and table top (I).
Step 2
Step 2:
Place the connecting bar (K) between table legs (J).
Insert the M6×15 bolt & washer (AA) to connect the table leg (J)
and connecting bar (K).
Loosely tighten by hand.
Step 3:
Completely tighten all the bolts with Allen wrench (DD).
Turn the table right side up.
Ensure all connections are secure before use.
8
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET-TABLE
NOTE: Do not completely tighten bolts until all steps are completed.
Stock# BH18-092-199-50
PART
NO. PICTURE DESCRIPTION QTY
1poTelbaTI
2geLelbaTJ
K Connecting Bar 1
J
I

Questions, problems, missing parts? Before returning to your retailer, call our customer service department
at [phone], 8:30 a.m. – 5:00 p.m. PST /11:30 a.m.- 8:00 p.m., EST, Monday- Friday.
9
Walmart Assembly Instruction
4PC STEEL CONVERSATION SET
Stock# BH18-092-199-50