BEYES ApexPilot G1 User manual

Endo Motor
Instruction for Use

2
1. Product introduction
1.1 Features
•Cordless
•Low noise
•9 memory setting
•Auto apical reverse/stop
1.2 Intended use
1.2.1 The device can be used for preparation and enlargement of root canals.
1.2.2 The device must be only operated by licensed dental professionals.
ApexPilot G1 is mainly used in Endodontic treatment. It can be used for preparation
and enlargement of root canals, or measuring canal length.
1.3 Contraindication
•Patient or doctor with a pacemaker
•Patient with hemophilia
•Patient with heart disease
•Pregnant women or young
Table of Contents
1. Product Introduction ............................................................................ 2
2. Warning and Safety............................................................................. 4
3. Installation .......................................................................................... 5
4. Operation............................................................................................. 7
5. Screen Display .................................................................................... 9
6. Automatic Reverse Function ............................................................... 10
7.Troubleshooting.................................................................................... 12
8. Cleaning, Disinfection and Sterilization ............................................... 13
9. Maintenance ....................................................................................... 15
10. Environmental Protection .................................................................. 16
11. After service....................................................................................... 17
12. Statement .......................................................................................... 17
13. Beyes Limited Warranty Statement................................................... 17
14.TechnicalSpecication...................................................................... 19
15. EMC-Declaration of Conformity......................................................... 20

3
1.4 Package includes
Motor handpiece Contra-angle
Charging base Lubricator Power adapter
1.5 Diagram of components and control buttons

4
2. Warning and Safety
Warning
•Before operating this device, thoroughly read this instruction manual.
•This device should be operated only by licensed dental professionals.
•Do not directly or indirectly place this device near heat source.
•Operate and store this device in reliable environment.
•This device requires special precautions regarding electromagnetic compatibility
(EMC) and must be in strict accordance with the EMC information for installation
anduse.Donotusethisequipmentespeciallyinthevicinityofuorescentlamps,
radio transmitting devices, remote control devices, handheld and mobile high-
frequency communication devices.
•Extended use in Reciprocating Mode may result in motor overheat
•Only use the original contra angle
•Do not make any changes to the device. Any changes may violate safety
regulations, causing harm to the patient
•Only use original power adapter. Other power adapter will result in damage to
lithium battery and control circuit.
•The motor handpiece cannot be autoclaved. Use disinfectant of neutral pH value
or ethyl alcohol to wipe its surface.
•Do not remove contra angle before motor stops. Doing so may cause damage to
handpiece and contra angle.
•Securethelebeforestarting.
•Settorqueandspeedaspertherecommendedspecicationsoflemanufacturer.
•Follow instruction in this manual to replace battery. And only replace with original
lithium battery.
•Remove battery from the handpiece for long-term storage.
•Heat builds up while charging. Do not touch the handpiece or charging base for
more than 10 sec during charging.
Safety
•Donotusedeviceinthepresenceofaammableanestheticmixturewithair,
oxygen, or nitrous oxide.
•Do not continuously use contra angle with patient for longer than 10 minutes. The
temperature of contra angle may reach 46.6°C. Allow time to cool down before
further use.

5
3. Installation
3.1 Battery
Handpiece has built-in lithium battery. It charges wirelessly through the base.
•Plug in power adapter and connect it to the charging base
•Seat handpiece on the charging base
•Flashing yellow light indicates device charging.
•When fully charged, yellow light will stay on.
3.2 Contra angle
•The contra angle adopts precision gear transmission, and the transmission ratio is
1:1.
•CleananddisinfectwithdisinfectantofneutralPHvaluebeforetherstuse.
•Clean and disinfect after usage on each patient
•Sterilize under 134°C, 2.0~2.3bar (0.20~0.23MPa).
•ContraangleinthispackageonlytsApexPilotG1.Thiswillnottother
handpieces.
Installation of contra angle
•Align the pin of the contra-
angle with one of the holes on
the motor handpiece, and push
in the contra-angle until there is
an audible click
•A “click” sound indicates that
the installation is in place.
Note:
There are 6 holes on the motor
handpiece which allows different
orientations and rotational range
to set the contra angle at
Once chosen orientation is set,
orientationisxed.Contraangle
cannot rotate.
Removal of contra angle
Pull out the contra angle horizontally when the motor handpiece is off.