Bico CYTENA BPS EZHold AC0104 Manual

EZHold
TM
Instruction Guide
Cat. No.
AC0104 (C.BIRD EZHold)
AS0101 (S.NEST EZHold)

2 | EZHold Instruction guide CYTENA BPS |
Instructions for use
Knob
Clamp
C.BIRD/S.NEST Lid
Microplate
Platform
Product description
The EZHold Lid Holder attaches to a microbioreactor, helps separate the lid
from the microplate, and enables adding supplements or other components
into wells without cross contaminating samples.

CYTENA BPS |
3 | EZHold Instruction guide
• Separation
1. Make sure the platform rises to its highest possible position by turning
the knob clockwise until it is tight.
2. Place the plate/lid set onto the platform.
Plate positioning grooves

4 | EZHold Instruction guide CYTENA BPS |
3. Push the plate/lid set forward into the EZHold until it is held tightly by
the clamp.
For S.NEST lid, the two air
ports must be faced inward
into the EZHold
For C.BIRD lid, the two
protruding ports on the top of
the same side of the lid must be
faced inward into the EZHold.
C.BIRD Lid S.NEST Lid

CYTENA BPS |
5 | EZHold Instruction guide
4. Lower the platform by turning the knob counterclockwise.
To avoid contamination,
cover the standard
microplate lid before
removing the plate.
Hint

6 | EZHold Instruction guide CYTENA BPS |
• Assembling
1. Place the plate onto the platform. Make sure the plate is tightly
positioned on the platform.
Push the plate forward
to the very end
2. Raise the platform to the top by turning the knob clockwise; this
ensures the plate is secured on top of the lid.

CYTENA BPS |
7 | EZHold Instruction guide
3. Remove the plate/lid set.

CYTENA BPS, A BICO COMPANY
1st Edition English 12/2021 | CBSUG003
© 2021 CYTENA Bioprocess Solutions Co., Ltd., Taipei, Taiwan
All rights reserved. Without the written consent of the publisher, this manual or any part of
it may not be in any form reproduced or distributed using electronic, mechanical or chemical
processes. It is possible that the present manual still contains typographical or printing errors.
The information in this manual, however, is regularly reviewed, and corrections are made in the
next output version. For technical or typographical errors, we provide no liability for the nature
and consequences thereof. All trademarks and copyrights are acknowledged.
Printed in Taiwan.
Information in this document is subject to change without notice.
inf[email protected] | www.cytena-bps.com | ([phone]