6
INSTALLATION AND STARTING UP
⇒
Stand the cabinet table B in a safe place. Pull up the
board A and block it with the hook C. Pull out the legs
(1).
⇒
Screw the box cover (2) to the wiring box (3).
⇒
Plug the power cord (5) into grounded outlet of suffi-
cient power.
⇒
Turn on the general switch (14).
OPERATING INSTRUCTIONS
⇒
Set the thermostat knob (4) to regulate the heating ele-
ment of the ironing table (50°/70°).
⇒
To operate the vacuum/blowing motor push the pedal
(6).
⇒
Per evitare la formazione di condensa all’interno del
tavolo, stirare quando il piano di lavoro è caldo e agire
sul pedale di aspirazione ogni volta che si usa il va-
pore.
WHEN FINISHED WORKING, TURN OFF ALL
THE SWITCHES, UNPLUG THE APPLIANCE
AND KEEP IN A DRY PLACE
3
GENERAL SAFETY INSTRUCTIONS
• After the removal of the package make sure of the appliance’s integrity. In case
of doubt do not operate the appliance but take it to a qualified service person for
examination and repair.
• Plastic bags, polystyrene, etc…, must be kept out of the children’s reach.
• Keep the appliance out of children’s reach.
• Before connecting appliance, make sure that data on the plate are the same as the
power supply network. The voltage appliance is of 230V monophasic with a plug
of 16A+T.
• Plug appliance into grounded outlet of sufficient power as provided for by the
safety regulations in force.
• Do not touch appliance with wet or damp hands.
• Always disconnect appliance from electrical outlet when not in use.
• This appliance is only and exclusively for its intended use so the manufacturer
can not be held responsible for any probable damage due to an illegitimate use.
• Before cleaning and maintenance make sure that appliance is disconnected from
outlet. Do not wash the appliance, do not immerse in water.
• In case of failure or operational defect, turn off appliance, disconnect from elec-
trical outlet. Do not disassemble or attempt to repair the appliance. Incorrect re-
assembly or repair could cause a risk of fire, electric shock, or injury to persons
when the appliance is used.
• Any repair must be executed by qualified service persons authorized by the
manufacturer. Ask for exclusive use of original spare-parts.
• Installation must be executed according to manufacturer’s instructions (space for
ventilation, room temperature).
• Do not operate appliance with damaged cord or hose, but let it made replaced.
• Do not remove safety device and protective cover.
• Do not service while appliance operates.
• Before servicing make sure that appliance is unplugged from electrical outlet.
• THE NON-OBSERVANCE OF THE ABOVE OPERATING AND SAFETY
INSTRUCTIONS COULD PREJUDICE SAFETY.
Have a good job.
