Bierley Shoppa User manual

TM
Shoppa
Thank you for purchasing the Bierley Shoppa
desktop electronic magnifier.
In this simple guide, we will show you how to set-up and
start to use your new Shoppa, then after that there are
many different ways to use it. For example, you can lay
it on a newspaper and slide it along to read. With the
camera in your hand, you can flip out the leg at the back
of the Shoppa and stand it at the top of a book whilst
reading. The Shoppa is of course great for hobbies too.
www.bierley.comwww.bierley.com
Shoppa TM
The Bierley Shoppa carries a one year worldwide
warranty, effective from the original date of purchase by
the consumer.
For warranty claims, the complete product and
accessories must be returned with the original purchase
receipt to your local supplier or directly to Bierley in the
UK.
Warranty void in the event of damage or abuse caused,
in the opinion of Bierley, by general wear and tear,
abuse, impact, neglect or by connecting other devices,
batteries or power supplies to the unit.
1 Year Worldwide Warranty
Bierley.com Limited
Crossing Cottage
Wyfordby, LE14 4RY
UK
0800 0430282
[e-mail]
www.bierley.com
Tel
E-mail
Web Bierley

Use
Coil Cable
Retainer
Main Power Switch
Off On
Power
Indicator light
DC IN Camera
Socket
Standby
On / Off
Brightness
Down / Up
Contrast
Down / Up
NOTE: Press the “Standby” button once and wait
2 ~ 3 seconds for the image to appear.
To change magnification or focus,
simply turn the white ring on the camera
clockwise or anti-clockwise up to one
full turn, as needed.
Variable
Magnification
Hold the camera off the page or at 45 degrees to view more
text or vertically for maximum magnification.
Setup
ONE
Unpack the monitor, camera, and power supply.

TWO
Plug the camera in the “Camera Socket” at the left side of
the monitor.

THREE
Slot the camera into the holder at the top of the monitor.


FOUR
Plug the power supply into a convenient mains
electricity wall socket.

FIVE
Insert the plug at the end of the cable into the
“DC IN”.
SIX
Slide the “Main Power Switch” on at the left side of the
monitor.
