Bierley MPD-12 User manual

The Bierley MPD-12 carries a one year worldwide
warranty, effective from the original date of
purchase by the consumer.
For warranty claims, the complete product and
accessories must be returned with the original
purchase receipt to your local supplier or directly to
Bierley in the USA.
Warranty void in the event of damage or abuse
caused, in the opinion of Bierley, by general wear
and tear, abuse, impact, neglect or by connecting
other devices, batteries or power supplies to the
unit.
1 Year Worldwide Warranty
Check List:
MPD-12 LCD
Remote ControlMPD-12 Camera
Power Supply Stand
MPD-12
Bierley
BierleyBierley
Bierley
MPD-12

Set up

Move the camera unit over any text or
images and they will be magnified onto the
screen.
2. Use as a photo frame
Press the play button on the remote control once
to go to the photo frame.
Some default images will be displayed until you
plug in a USB drive with your own photos.
To display your own photo’s, plug in a USB drive
containing the photo’s and the MPD-12 will be
display them one by one.


Note: The MPD-12 can display images of any size,
but the ideal size is 1280 x 800.





Note: The MPD-12 will turn on automatically when
first connected to a power source.
3. Use as a digital clock

Set Date / Time
Press the Menu button ( see below ) to go to
Date / Time set up.
Press the Increase button to increase the date /
time, or press the Decrease button to decrease the
date / time, press the Menu button again to confirm
the changes.

Press the play button until the digital clock
appears.
MPD-12 side penal
Decrease
Increase
Menu
USB
Camera
Power
Remote Control
Camera
Photo Frame
Digital Clock

1. Use as a magnifier
Carefully place the MPD-12 face down and install
the stand
Stand the unit upright and plug in the camera
Plug the power supply connector into the MPD-12
Plug the power supply into a suitable wall outlet




Using the MPD-12
