Humanware Connect 12 User manual

Page 1

Page 2

Page 3
GETTING STARTED
1. On a flat, stable surface, hold your
Connect 12 stand upright, making sure
that the panel marked “Connect” faces
towards the back. Hold the handle with
one hand, and unfold the lower panel with
your other hand until it is lying flat.
2. Unfold the top panel until it is roughly
parallel to the lower panel.

Page 4
3. Hold your tablet with the screen facing
you, ensuring the HumanWare logo is at
the top. Carefully insert the tablet into the
slot and slide it forward until you reach the
back end of the slot. Push the bottom part
of the tablet down; you will hear a click
indicating that your tablet is locked into
place.

Page 5
4. Connect the USB Cable to the Power
Adapter.
5. Carefully connect the cable to the USB-C
port and plug it into an outlet. The USB-C
port is located on the left side of the tablet.
IMPORTANT:
•Only use power adapter and cable
supplied with Connect 12.
•Use caution while inserting the cable
into the USB-C Port.
•Do not close your folding stand with
your tablet in it when the USB cable
is plugged in; this will damage the
USB cable and/or tablet.

Page 6
6. Charge the battery to full capacity (initial
charge is 8 hours).
7. Press and hold the Power button to power
On your tablet. The tablet will take
approximately 45 seconds to initialize. The
HumanWare and Android logos will
appear on the screen.
8. You will now be prompted through several
setup wizards.
IMPORTANT: Visual accessibility settings are
available before completing the wizards. Be sure
to tap “Vision Settings” at the bottom of the
screen and make any required adjustments prior
to entering the wizard.
For more information on using your Connect
12, Android, and Prodigi software, refer to the
User Guide.

Page 7

Page 8
ACCD-0314
REV 03
Customer support
For customer support, please contact the HumanWare office
nearest you or visit our website at:
www.humanware.com/connectsupport
Global: [email protected]
North America: 1 [phone]
[e-mail]
Europe: [phone] 800
[e-mail]
Australia / Asia: [phone]
[email protected]