Billion BIPAC-7402 User manual

BIPAC- 7402
ADSL Modem/Router
Features >>
Features >>Features >>
Features >> VPN with 3DES Accelerator,
QoS (Quality of Service) & -
port Switch!!
Quick Start Guide

Billion 7402 ADSL Modem/Router
1
IMPORTANT notice rom Billion...
This Quick Start Guide (QSG) is to guide user to connect to the Internet
in a very short time. Having Internet access will not be far away from
this oint of time.
This router, Billion 7402, has been customised for New Zealand users.
That is, its factory default rofile is re-configured for New Zealand.
Hence, less ste s in configuring your router.
There are 2 User's Manuals included in the ackage: (1) Quick Start
Guide (this booklet your are reading) (2) Billion 7402 Series ADSL
Router Universal User's Manual (File name: Universal Manual and it is
saved on the CD included in the ackage). Both manuals should be read
in conjunction with each other.
Why read QSG? Because it is designed for New Zealand users whereas
the Billion 7402 ADSL Router Universal Manual guides international
and/or advanced users.
Package Contents
• Billion 7402 ADSL Modem/Router
• Drivers & Utilities CD
• This Quick Start Guide
• One RJ-11 (A-Ty e) "ADSL Router-to-ADSL s litter"
tele hone cable [both ends are of square sha e]
• One RJ-11 (B-Ty e) "ADSL s litter-to-tele hone walljack"
tele hone cable [one end is of square sha e only]
• One RJ-45 (CAT-5) straight (standard) LAN cable
• One ADSL line filter/s litter (call “s litter” for short)
• One PS2/RS-232 cable (Console Port cable).
• One DC 12V 1A Power ada tor

Billion 7402 ADSL Modem/Router
2
WARNING!
The grant of a Tele ermit for any item of terminal
equi ment indicates only that Telecom has acce ted
that the item com lies with minimum conditions for
connection to its network. It indicates no endorsement
of the roduct by Telecom, nor does it rovide any
sort of warranty. Above all, it rovides no assurance
that any Tele ermitted equi ment of a different make
or model, nor does it im ly that any roduct is
com atible with all of Telecom’s network services.

Billion 7402 ADSL Modem/Router
3
To know about your ADSL Modem/Router…
The Front Panel LEDs o Billion 7402
LED Meaning
1
PPP/MAIL
Lit steady when there is a PPPoA / PPPoE
connection.
Lit and flashed eriodically when there is email in
the Inbox.
2
ADSL Lit when successfully connected to an ADSL DSLAM
(“linesync”).
3
LAN
Lit when connected to an Ethernet device.
Green for 100Mb s; Orange for 10Mb s.
Blinking when data is Transmitted / Received.
4
SYS Lit when the system is ready.
5
PWR Lit when ower is ON.
1
2
3
5

Billion 7402 ADSL Modem/Router
4
Please follow Billion’s
READY? & GO! Program
to complete the setup of the router and enjoy the high
speed of Internet!!
1. READY?
[Do you have the following installed on your PC?]
 An Ethernet (LAN)
 TCP/IP rotocol
 A web browser. E.g. Internet Ex lorer 5.0 or Netsca e 6 or later.
 Your Internet account details. i.e. username and assword su lied
by your Internet Service Provider (ISP)
2. GO!
2.1 [Hardware Chapter]
Please check out the ear Ports of 7402 on next page (page 5) to know what
to connect using what kind of cable.
Connect your router to your PC and to other devices using the accessories
provided according to the rear ports layout on next page.

Billion 7402 ADSL Modem/Router
5
The Rear Ports of 7402
LINE
[ J-11 A-
Type
Connector or
Modem Line
Port]
(3.1) Plug in J-11-A cable to this
LINE port and another end of
cable to the MODEM port on the
SPLITTE .
(3.2) Splitter’s tail will plug into
the walljack.
(3.3) Plug in J-11-B cable to
PHONE port on the SPLITTE
and another end of cable to any
Telephone device. Warning: ALL
telephone devices in the
residence MUST be connected
through splitters.
Console
Connect a PS2/ S-232 cable to
this port when connecting to a
PC’s S-232 port (9-pin serial
port).
LAN
No.1~4
[ J-45
Connector or
Ethernet Port]
Connect the supplied standard
cable to this port while another
end connects to the LAN port of
the PC.
This LAN port can AUTO-
DETECT standard and crossover
cables
Reset Button
Press it if you intend to restore the
factory default settings back.
Power
Socket
Connect the supplied power
adapter to this jack.
Power
Switch
ecommend turn it on AFTE
everything is connected properly.

Billion 7402 ADSL Modem/Router
6
2.2 [Software Chapter]
2.2.1 Connection Mode
LAN (Ethernet) port users:
Please follow the “Configuring the Network Pro erties on a PC”
section (Procedure 2.2.2) on the bottom of this age to
modify the network settings.
2.2.2 Con iguring the Network Properties on PC
Windows XP/2000 users
1. Click Start and go to
SettingsControl
PanelNetwork
Connections.
2. ight-click Network
Connections icon, choose
Properties.
3. Select Internet Protocol
(TCP/IP) and click
Properties.
4. Select the Obtain an IP
address automatically and
the Obtain DNS server
address automatically radio
buttons.
5. Click OK to finished the
configuration.
Please go to Procedure 2.2.3 on page 8 to continue.

Billion 7402 ADSL Modem/Router
7
Windows 95/98/Me users
1. Click Start and go to
Settings

Control
Panel

Network.
2. Select Internet Protocol
(TCP/IP)

[Name o Your
Network Card] and Click
Properties.
3. Select the IP Address tab. In
this page, click the Obtain an
IP address automatically
radio button.
4. Then select the DNS
Con iguration tab.
5. Select the Disable DNS radio
button and click OK to finish
the configuration then
prepare to Restart your
computer.

Billion 7402 ADSL Modem/Router
8
Windows NT 4.0 users
1. Click Start and go to
Settings

Control
Panel

Network.
2. Select Internet Protocol
(TCP/IP)

[Name o Your
Network Card] and Click
Properties.
3. Select the Obtain an IP
address rom a DHCP
server radio button and click
OK.
2.2.3 Veri ying i your PC connects to the Router success ully
(This checking is OPTIONAL. Otherwise, go to 2.2.4)
To see if this ADSL outer is
visible on the local network, go to
Start / Run. In the un dialog box,
type “ping 192.168.1.254” then
press OK.

Billion 7402 ADSL Modem/Router
9
Snapshot of a Successful Connection
A command prompt window will
pop out. If your ping is successful
which means your local network is
able to reach to the device, then
the command prompt window will
close up automatically.
Snapshot of a Failed Connection
Connection fails, when you see
“Request timed out” in the
command prompt window. You
may need to check your set up.
2.2.4 Con iguring the ADSL Modem/Router
1. Open the web browser and
type http://192.168.1.254 in
the browser’s address field
and press Enter. This
number is the default IP
address for this router.
Enter the default
User name: admin
Password: admin
Then press OK to enter the router
setup page.

Billion 7402 ADSL Modem/Router
10
2. Click Quick Start on the
pane at the left-hand-side.
3. Check the Encapsulation is
PPPoA and Values of Virtual
Circuit ID, VPI & VCI are 0
and 100 respectively. Please
refer to the figure on the
right-hand-side. (Note: Some
ISPs use PPPoE as their
encapsulation, if unsure
please click Auto Scan or
check it with your ISP)
4. Enter your Internet Account
Details, then click Next.
Other settings (e.g. Optional Settings
& DNS) are for advanced users,
please do NOT change them.
User Name MUST fill in
Password MUST fill in
IMPORTANT: When entering the User
Name, please ensure user I
followed by a @ symbol followed
by the domain name e.g.
[email protected]
Note that for the Xtra Velo ity Servi e
the customer user I has “.xadsl”
appended to it i.e.
[email protected] Other ISPs
may or may not have similar
requirements, the user will need to
check this with their ISP. Also, the
User Name and Password are CASE
SENSITIVE!
5. Click Apply.

Billion 7402 ADSL Modem/Router
11
6. A “Successful” message
should appear.
7. Click SAVE CONFIG and
then Apply to save settings
you have made permanently.
A “Save Config to FLASH
Successful” message should
appear.
Note: You could still connect to
the Internet without saving
config to FLASH, but when
the router is being switched
off and back on again, you
will have to re-enter your
Internet account details.
8. Click F5 key to return to the
Home Page of outer. And
then check the table of WAN
and see if the Internet
Access is established (i.e.
PPP Connection).
CONGRATULATIONS!
YOU ARE DONE!!
Go and s rf the Internet now!

Billion 7402 ADSL Modem/Router
12
Not Connected???
Click F5 key to return to the Home
Page of outer and check the
WAN table and see if you have
the figure shown on the right-
hand-side.
You MUST go back to Quick
Start and check if you mis-
entered your username and/or
password (remember, they are
case sensitive and no space spam
before or after the texts). If all
correct and it still shows “Invalid
Username or Password”, then
please check this with your ISP.
3. Product Support and Contact In ormation
Most problems can be solved by referring to the Troubleshooting section in
the User’s Manual. If you cannot resolve the problem with the
Troubleshooting chapter, please contact the dealer where you purchased
this product.
For further assistances with the
product, please feel free to contact
and visit us at:
http://www.billion.com
New Zealand Customer
Technical
Support:
Mail to: [email protected]
FREE Phone:
0800 008 765