Binder BD 56 User manual

Issue 07/2017 Art. No. 7001-0292
Operating Manual
BD (E3.1)
|
Incubators
Avantgarde.Line with natural convection
BF (E3.1)
|
Incubators
Avantgarde.Line with forced convection
ED (E3.1)
|
Drying and heating ovens
Avantgarde.Line with natural convection
FD (E3.1)
|
Drying and heating ovens
Avantgarde.Line with forced convection
FED (E3.1)
|
Drying and heating ovens
Avantgarde.Line with forced convection
and enhanced timer functions
with microprocessor temperature controller
Model Model version Art. No. Model Model version Art. No.
BD 56 BD056-230V 9010/ 9110-0323 FD 56 FD056-230V 9010/ 9110-0303
BD056UL-120V 9010/ 9110-0324 FD056UL-120V 9010/ 9110-0304
BD 115 BD115-230V 9010/ 9110-0325 FD 115 FD115-230V 9010/ 9110-0305
BD115UL-120V 9010/ 9110-0326 FD115UL-120V 9010/ 9110-0306
BD 260 BD260-230V 9010/ 9110-0329 FD 260 FD260-230V 9010/ 9110-0309
BD260UL-120V 9010/ 9110-0330 FD260UL-240V 9010/ 9110-0310
BF 56 BF056-230V 9010/ 9110-0313 FED 56 FED056-230V 9010/ 9110-0295
BF056UL-120V 9010/ 9110-0314 FED056UL-120V 9010/ 9110-0296
BF 115 BF115-230V 9010/ 9110-0315 FED 115 FED115-230V 9010/ 9110-0293
BF115UL-120V 9010/ 9110-0316 FED115UL-120V 9010/ 9110-0294
BF 260 BF260-230V 9010/ 9110-0319 FED 260 FED260-230V 9010/ 9110-0299
BF260UL-120V 9010/ 9110-0320 FED260UL-240V 9010/ 9110-0300
ED 56 ED056-230V 9010/ 9110-0333
ED056UL-120V 9010/ 9110-0334
ED 115 ED115-230V 9010/ 9110-0335
ED115UL-120V 9010/ 9110-0336
ED 260 ED260-230V 9010/ 9110-0339
ED260UL-240V 9010/ 9110-0340
BINDER GmbH
Address: Post office box 102, 78502 Tuttlingen, Germany Phone: [phone]
Fax: [phone] Internet: http://www.binder-world.com
E-mail: [e-mail] Service Hotline: [phone]
Service Fax: [phone] Service E-Mail: [e-mail]
Service Hotline USA: [phone] or [phone] x3
Service Hotline Asia Pacific: [phone] or [phone]
Service Hotline Russia and CIS: [phone]

BD / BF / ED / FD / FED (E3.1) 07/2017 page 2/99
Content
1. SAFETY..................................................................................................................5
1.1 Legal considerations...........................................................................................................................5
1.2 Structure of the safety instructions......................................................................................................5
1.2.1 Signal word panel......................................................................................................................5
1.2.2 Safety alert symbol....................................................................................................................6
1.2.3 Pictograms.................................................................................................................................6
1.2.4 Word message panel structure .................................................................................................7
1.3 Localization / position of safety labels on the chamber ......................................................................7
1.4 Type plate............................................................................................................................................8
1.5 General safety instructions on installing and operating the chambers ...............................................9
1.6 Intended use .....................................................................................................................................11
2. CHAMBER DESCRIPTION..................................................................................12
2.1 Chamber overview............................................................................................................................12
2.2 Triangular instrument panel ..............................................................................................................13
3. COMPLETENESS OF DELIVERY, TRANSPORTATION, STORAGE, AND
INSTALLATION....................................................................................................14
3.1 Unpacking, and checking equipment and completeness of delivery................................................14
3.2 Guidelines for safe lifting and transportation.....................................................................................14
3.3 Storage..............................................................................................................................................15
3.4 Location of installation and ambient conditions ................................................................................15
4. INSTALLATION....................................................................................................16
4.1 Mounting the tilt protection holders (chambers with window)...........................................................16
4.2 Electrical connection.........................................................................................................................17
4.3 Connection to a suction plant (optional)............................................................................................18
5. START UP............................................................................................................18
5.1 Behavior when opening the door ......................................................................................................18
6. OVERVIEW AND GENERAL SETTINGS ON THE R4 CONTROLLER...............19
6.1 Controller overview ...........................................................................................................................19
6.2 Normal display ..................................................................................................................................19
6.3 Setting the menu language...............................................................................................................20
6.4 Setting date and time........................................................................................................................21
6.5 Selecting the temperature unit..........................................................................................................23
6.6 Set-point entry for temperature and fan speed.................................................................................24
6.7 Adjusting the air flap position............................................................................................................25
6.8 Changing the passwords for user level and general controller functions .........................................26
7. OVERTEMPERATURE PROTECTION................................................................28
7.1 Overtemperature protective device (class 1) ....................................................................................28
7.2 Safety controller ................................................................................................................................29
7.3 Setting the safety controller set-point................................................................................................30
7.4 Alarm message and proceeding in case of an alarm........................................................................31
7.5 Function check..................................................................................................................................31
7.6 Disconnectable audible over-temperature alarm (option).................................................................32
8. TIMER FUNCTIONS.............................................................................................33
8.1 Selecting the timer function...............................................................................................................33
8.2 Timer function “Delayed Off”.............................................................................................................34
8.2.1 Entry and activation of the timer run-time and fan setting.......................................................34
8.2.2 Turning off the timer function or changing the settings ...........................................................36

BD / BF / ED / FD / FED (E3.1) 07/2017 page 3/99
8.3 Timer function “Temperature dependent Delayed Off” (BF, FED)....................................................38
8.3.1 Entry and activation of the timer run-time, fan setting and set-point entry..............................38
8.3.2 Turning off the timer function or changing the settings ...........................................................40
8.4 Timer function “Delayed On” (BF, FED)............................................................................................41
8.4.1 Entry and activation of the timer run-time and fan setting.......................................................41
8.4.2 Changing the settings..............................................................................................................43
8.5 Temperature programming example (BF, FED) ...............................................................................43
9. RAMP FUNCTION................................................................................................44
9.1 General information...........................................................................................................................44
9.2 Setting and displaying the ramp function..........................................................................................45
9.3 Displaying the effective ramp set-point and changing the target ramp set-point..............................46
9.4 Turning off the ramp function............................................................................................................47
10. DATA RECORDING VIA USB INTERFACE........................................................48
10.1 Starting data recording......................................................................................................................48
10.2 Terminating data recording...............................................................................................................49
11. NETWORK CONFIGURATION FOR CHAMBERS WITH ETHERNET
INTERFACE .........................................................................................................50
12. OPTIONS..............................................................................................................53
12.1 Communication software APT-COM™ 3 DataControlSystem (option) ............................................53
12.2 Data logger kits (option)....................................................................................................................53
12.3 Object temperature display with additional Pt100 temperature sensor (option)...............................53
12.4 Analog output for temperature (option).............................................................................................54
12.5 Water protected disconnectable internal socket (option BD, BF) .....................................................54
12.6 HEPA fresh air filter (option for FD, FED).........................................................................................55
12.7 Mostly gas-tight version (option for BF, FD, FED)............................................................................55
12.8 Inert gas connection with mostly gas-tight version (option for BF, FD, FED)...................................55
13. MAINTENANCE, CLEANING, AND SERVICE ....................................................57
13.1 Maintenance intervals, service..........................................................................................................57
13.2 Cleaning and decontamination .........................................................................................................58
13.2.1 Cleaning ..................................................................................................................................58
13.2.2 Decontamination......................................................................................................................59
13.3 Sending the chamber back to BINDER GmbH.................................................................................60
14. DISPOSAL............................................................................................................61
14.1 Disposal of the transport packing......................................................................................................61
14.2 Decommissioning..............................................................................................................................61
14.3 Disposal of the chamber in the Federal Republic of Germany.........................................................61
14.4 Disposal of the chamber in the member states of the EU except for the Federal Republic of
Germany............................................................................................................................................62
14.5 Disposal of the chamber in non-member states of the EU ...............................................................63
15. TROUBLESHOOTING .........................................................................................64
16. TECHNICAL DESCRIPTION................................................................................65
16.1 Factory calibration and adjustment...................................................................................................65
16.2 Definition of usable volume...............................................................................................................65
16.3 Over current protection .....................................................................................................................65
16.4 BD technical data..............................................................................................................................66
16.5 BF technical data ..............................................................................................................................67
16.6 ED technical data..............................................................................................................................69
16.7 FD technical data ..............................................................................................................................70
16.8 FED technical data............................................................................................................................72
16.9 Equipment and options (extract).......................................................................................................74
16.10 Accessories and spare parts (extract) ..............................................................................................75
16.11 Dimensions size 56...........................................................................................................................77
16.12 Dimensions size 115.........................................................................................................................79
16.13 Dimensions size 260.........................................................................................................................81

BD / BF / ED / FD / FED (E3.1) 07/2017 page 4/99
17. CERTIFICATES AND DECLARATIONS OF CONFORMITY...............................83
17.1 EU Declaration of Conformity for BD ................................................................................................83
17.2 EU Declaration of Conformity for BF.................................................................................................85
17.3 EU Declaration of Conformity for ED ................................................................................................87
17.4 EU Declaration of Conformity for FD ................................................................................................89
17.5 EU Declaration of Conformity for FED..............................................................................................91
18. PRODUCT REGISTRATION................................................................................93
19. CONTAMINATION CLEARANCE CERTIFICATE ...............................................94
19.1 For chambers located outside the USA and Canada .......................................................................94
19.2 For chambers located in the USA and Canada ................................................................................97

BD / BF / ED / FD / FED (E3.1) 07/2017 page 5/99
Dear customer,
For the correct operation of the chambers, it is important that you read this operating manual completely
and carefully and observe all instructions as indicated. Failure to read, understand and follow the instruc-
tions may result in personal injury. It can also lead to damage to the chamber and/or poor equipment
performance
1. Safety
This operating manual is part of the components of delivery. Always keep it handy for reference. The
device should only be operated by laboratory personnel especially trained for this purpose and familiar
with all precautionary measures required for working in a laboratory. Observe the national regulations on
minimum age of laboratory personnel To avoid injuries and damage observe the safety instructions of the
operating manual.
WARNING
Failure to observe the safety instructions.
Serious injuries and chamber damage.
Observe the safety instructions in this operating manual
Carefully read the complete operating instructions of the chambers.
1.1 Legal considerations
This operating manual is for informational purposes only. It contains information for installing, start-up,
operation and maintenance of the product. Note: the contents and the product described are subject to
change without notice.
Understanding and observing the instructions in this operating manual are prerequisites for hazard-free
use and safety during operation and maintenance. In no event shall BINDER be held liable for any dam-
ages, direct or incidental arising out of or related to the use of this manual.
This operating manual cannot cover all conceivable applications. If you would like additional information,
or if special problems arise that are not sufficiently addressed in this manual, please ask your dealer or
contact us directly by phone at the number located on page one of this manual
Furthermore, we emphasize that the contents of this operating manual are not part of an earlier or exist-
ing agreement, description, or legal relationship, nor do they modify such a relationship. All obligations on
the part of BINDER derive from the respective purchase contract, which also contains the entire and ex-
clusively valid statement of warranty administration. The statements in this manual neither augment nor
restrict the contractual warranty provisions.
1.2 Structure of the safety instructions
In this operating manual, the following safety definitions and symbols indicate dangerous situations fol-
lowing the harmonization of ISO 3864-2 and ANSI Z535.6.
1.2.1 Signal word panel
Depending on the probability of serious consequences, potential dangers are identified with a signal
word, the corresponding safety color, and if appropriate, the safety alert symbol.
DANGER
Indicates an imminently hazardous situation that, if not avoided, will result in death or serious
(irreversible) injury.