Darco Web Ankle Brace User manual

Indications
For the prevention and support of the ankle during sports activities and
for use in everyday life. Used specifically for supporting those with mild
acute ankle injuries.
Sizes:
The ankle support can be worn on the right or left and is available in
the following sizes:
XS (2.5 – 5.5), S (6 – 7.5), M (8 – 10.5), L (11 – 12.5), XL (13 – 14.5)
Material:
Inner support: Polyester webbing
Outer support: Nylon
Hook and loop fastening: Polyester
Stability elements: Polypropylene
Maintenance:
The product does not require maintenance.
Technical data
Please always follow these instructions for use. Do not over tighten –
this could lead to decreased circulation. If you experience pain, abnormal
swelling or skin irritation, discontinue use and contact your medical
provider. If the product is handled incorrectly, its function and optimum
protection can no longer be guaranteed. This aid assists recovery and
should be used exclusively under the instruction of and in consultation
with your doctor or a healthcare professional. DARCO (Europe) GmbH
does not assume any responsibility. It is advisable to wear dressings or
socks with the shoe. Walk more slowly than usual. This aid is intended
for single-patient use only.
Caution
190725
Manufactured for:
DARCO International, Inc.
810 Memorial Blvd.
Huntington, WV 25701, USA
Toll-free 800.999.8866
Phone [phone]
Fax [phone]
www.darcointernational.com
DARCO (Europe) GmbH
Gewerbegebiet 18
82399 Raisting, Germany
Telefon [phone] | Fax -22
[e-mail], www.darco.de
Made in China
Web
Ankle Brace

Instructions for use
Web Ankle Brace
Ankle Brace
It is highly recommended that a sock be worn when using the
Web Ankle Brace.
1.Check the stay placement before applying the brace. The rigid stays are
marked INSIDE – for the inside of the ankle and OUTSIDE – for the outside
of the ankle. The stays may be switched to accommodate a left or right
ankle.
a.Medial – inside Stay
b.Lateral – outside Stay
2.Open up the back of the brace, slide your foot into the brace and secure
hook and loop backing evenly.
3.Take the lower straps and adjust for equal length. Stretch the straps
and wrap them around your ankle, securing them in the back.
4.Cross the upper strap over the centre and wrap around the top of ankle
to secure.
5.The bungee closure system can be easily adjusted without removing your
shoe. Simply tighten and adjust the straps as needed to ensure consistent
compression and a snug fit.
6.An adhesive backed foam spacer is included with the brace. The spacer
can be trimmed and placed on the rigid stays if more padding is needed
for comfort.
1.
2.
ab
3.
4.
5.
6.
> Remove rigid stays before washing.
> The Web Ankle Brace is machine washable using a mild detergent and
warm water.
> To prevent the hook and loop straps from damaging other items in the
wash, place the Web Ankle Brace in a washable bag before washing or
wash separately.
> Remove promptly and air dry.
Cleaning instructions