Birlea CORONA S000238 User manual

Vendor: S000238
Page 1 of 6
ASSEMBLY INSTRUCTIONS
CORONA 1 DRAWER COFFEE TABLE
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR CORONA 1
DRAWER COFFEE TABLE.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
ASSEMBLY INSTRUCTIONS:
Please check contents and read instructions carefully before commencing assembly.
To avoid damages assemble the item on a soft, clean surface.
Assemble in the room of use.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fi ings are secured.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Keep small parts out of the reach of children.
CARE & MAINTENANCE:
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations.
On unpacking the item you may notice an odour due to the production process, however, this will disappear
after a period of time.
DO NOT place the item ne t to a radiator or direct sunlight as this item is susceptible to temperature
change. It is recommended to maintain an even room temperature with no sudden fluctuations.
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as the use of these materials would invalidate any claims.
You may wish to re-treat the surface to maintain the original finish. This can be done using block wa (un-
perfumed). Please follow the manufacturer’s instructions carefully.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
Periodically check all screws & fi ings to ensure they are secure.
DO NOT push the item as this will damage the base.
Keep any sharp objects away from the item.
www.birlea.com

Vendor: S000238
Page 2 of 6
Parts List Har ware List
Part Description Qty Part Description Qty
1
Top Panel
1
A Wooden Dowel
34
2
Front Panel
1
B 30 mm Screw
8
3
Back Panel
1
C 35 mm Screw
31
4
Side Panel
2
D 19 mm Screw
1
5
Leg
4
E
Handle
1
6
Drawer Front
1
F Stud
20
7
Drawer Side
2
** You will nee a small mallet an a screw river.
8
Drawer Back
1
9
Drawer Base
1
10
Drawer Runner
2
11
Support Rail
1

Vendor: S000238
Page 3 of 6
Step 1: Assemble the drawer components using hardware parts B, D and E with a screwdriver (not
provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 2: Insert hardware part A using a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Vendor: S000238
Page 4 of 6
Step 3: Attach the legs (5) to the back panel (3) using hardware part C and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 4: Attach the side panels (4) using hardware part C and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 5: Attach the legs (5) to the front panel (2) using hardware part C and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Vendor: S000238
Page 5 of 6
Step 6: Attach the drawer runners (10) using hardware parts A and C with a small mallet and screwdriver
(not provided) then insert the support rail (11).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 7: Join the two assembled sections together as shown, then attach the top panel (1). Secure using
hardware part C and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Vendor: S000238
Page 6 of 6
Step 8: Insert hardware part F then secure the drawer in place using hardware part A and a small mallet (not
provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the website
www.birlea.com
• If you have any issues with your item please contact the retailer directly you purchased it from who
will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be shared in our
#birleahome feature on Instagram.