Birlea CAMDEN CABIN BED User manual

ASSEMBLY INSTRUCTIONS
CAMDEN CABIN BED
Page 1 of 14
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING
YOUR CAMDEN CABIN BED.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
It is recommended that two people handle and assemble the item.
Birlea advise you use the wall straps provided to further enhance the safety of this product.
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots,
grains, clusters or indentations.
On unpacking the item you may notice an odour due to production processes but this will disappear
after a period of time.
DO NOT place the item next to a radiator or direct sunlight - this item is susceptible to temperature
change. It is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet - do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor.
INFORMATION:
Maximum thickness of mattress 15cm.
Recommend size of mattress L192cm x W92cm x H15cm.
www.birlea.com
Vendor: S000398

Page 2 of 14
Vendor: S000398
11
35
96
1
19
7
20
19
2
8
5
4
12
21
14
16
15
22
17
13
12
15
14
10
10
11
11
11
11
11
18

12
CAM NUT 15mm
12
CAM BOLT
38
WOOD DOWEL M6 x 25mm
36
CSK SCREW M3.5 x 12mm
14
CSK SCREW M4 x 38mm
4PVC NAIL 5/8''
METAL RUNNER TRUCK 14"
2
CSK SCREW M4 x 30mm
JCBC SCREW M6 x 25mm
ALLEN KEY
8
STEEL NUT M6
JCBC SCREW M6 x 50mm
JCN M6 6
8
3
3 set
12
CSK SCREW M3.5 x 25mm 6
JCBCW SCREW M6 x 50mm 16
HANDLE AC85 128MM 2
HANDLE AC84 32MM 1
MDF SUPPORT 2
STICKER 20mm 21
JCBC SCREW M6 x 30mm 7
3 setMETAL RUNNER 14"
Page 3 of 14
** WARNING: THE USE OF POWER TOOLS TO ASSEMBLE THIS PRODUCT WILL INVALIDATE
ANY CLAIM AND MAY DAMAGE THIS PRODUCT MAKING IT UNSAFE.
Part Qty Description
PART LIST
Carton 1 of 3:
Part Qty Description
HARDWARE LIST
Carton 1 of 3:
1 1
Left Panel A
B
C
D
E
2 1
10 2
12 2
13 1
14 3
15 3
16 2
3 1
4 1
52
6 1
7
Part Qty Description
Carton 2 of 3:
Hardware List
Right Panel
Drawer Left Panel
Drawer Right Panel
Drawer Back Panel (B)
Back Panel
Front Panel
Center Panel
Drawer Front Panel (B)
Drawer Front Panel (S)
Support Panel
1
Vendor: S000398
17 1
Drawer Back Panel (S)
18 2
19 2
20 1
21 2
22 1
Drawer Support Panel
Drawer Bottom Panel (S)
Back Panel (B)
Back Panel (S)
Drawer Bottom Panel (B)
8 1
9 1
Vertical Panel
Bottom Back Panel
Bottom Front Panel
Center Support Panel
Part Qty Description
Carton 3 of 3:
11 6Base Panel
F
G
H
I
J
K
L
M
N
O
R
S
T
U
Q
P
** You will need a screwdriver and a small mallet
( NOT provided)

Page 4 of 14
1Insert hardware part (A) and part (B) using a screwdriver (not provided). Insert hardware
part (C) using a small mallet (not provided). Insert hardware part (D) using a screwdriver
(not provided). Insert hardware part (N) using a small mallet (not provided). Insert
hardware (O) using a small mallet (not provided). Attach hardware part (P) with screw (E)
using screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.
Vendor: S000398
12
12
38
A
B
C
8
D
4N
2
O
18
E
3P
D
D
D
D
D
D
D
D
AA
A
A
1
2
3
4
7
8
9
6
14 x3pcs
15 x3pcs
12 x2pcs
13
N
N
N
N
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
CC
C
C
B
B
B
B
B
C
C
N
B
C
D
A
P
E
P
E
2, , 101
B
B
B
B
O
O
P
P
P
P10 x2pcs
10 x2pcs
A
18 x2pcs C
C

Page 5 of 14
2
Insert drawer bottom panel (21) as shown.
Vendor: S000398
3
H
10H
H
x 2sets
x 2sets
H
H
H
14
18
15
16
15
21
Fix drawer left and right panels (14) and (15) to drawer back panel (16) with screw (H) by
screwdriver (not provided). Fix drawer support panel (18) to drawer back panel (16) with
screw (H) by screwdriver (not provided).
DO NOT use any power tools as this may damage the frame and will invalidate any claim.