Birlea PORTO 4 BED User manual

Vendor: S000238
Page 1 of 5
ASSEMBLY INSTRUCTIONS
PORTO 4’ BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR PORTO 4’ BED
FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Always use on a level, even surface.
WARNING: If thi bed i placed on a non-carpeted floor you mu t place ome protection under all leg to top
the bed frame from moving. If thi i not adhered to there i no guarantee if the bed frame collap e .
CARE & MAINTENANCE:
eriodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
Always lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000238
Page 2 of 5
Part Li t Hardware Li t (found in Box 1)
Part
De cription Box Qty Part De cription Qty
1 Headend anel 1 1 A 30 mm Wooden Dowel 8
2 Right Headend ost 2 1 B 40 mm Wooden Dowel 8
3 Left Headend ost 2 1 C 16 mm Screw 8
4 Side Rail 2 2 D 30 mm Screw 48
5 Slat 1 24 E 32 mm Bolt 2
6 Centre Rail 2 1 F Nut 2
7 Support Leg 2 2 G 50 mm Bolt 2
8 Footend anel 2 1 H 110 mm Bolt 8
9 Right Footend ost 1 1 J 70 mm Bolt 4
10 Left Footend ost 1 1 K
Elliptical Nut
4
11 Headend Rail 1 1 L Metal Bracket 2
** You will need a crewdriver, mall mallet and
M11 panner (not provided).
M Allen Key 1
N
Spacer
2

Vendor: S000238
Page 3 of 5
Step 1: Attach the support legs (7) to the centre rail (6) using hardware parts G and M. Insert hardware part
B to the side rails (4) using a small mallet (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 2: Insert hardware part A to the headend panel (1), footend panel (8) and headend rail (11) using a
small mallet (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 3: Attach the right headend post (2) and left headend post (3) to the headend panel (1) and headend
rail (11) using hardware parts H and M.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000238
Page 4 of 5
Step 4: Attach the right footend post (9) and left footend post (10) to the footend panel (8) using hardware
parts H and M.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 5: Fix hardware part L to the headend rail (11) and footend panel (8) using hardware part C and a
screwdriver (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 6: Attach the side rails (4) using hardware part J, K and M. Fix the centre rail (6) using hardware parts E
and F with an M11 spanner (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.

Vendor: S000238
Page 5 of 5
Step 7: Attach the footend using hardware parts J, K and M. Fix the centre rail (6) in place using hardware
parts E and F with an M11 spanner (not provided).
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Step 8: Secure the slats (5) in position to the side rails (4) and centre rail (6) using hardware parts D and N
with a screwdriver (not provided) making sure to start from the ends and work towards the middle.
DO NOT u e any power tool a thi may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.