Birlea Denver 4' Bed Ivory User manual

Vendor: S000159
Page 1 of 4
ASSEMBLY INSTRUCTIONS
DENVER 4’ BED IVORY
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR DENVER 4’ IVORY
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If th s bed s placed on a non-carpeted floor you must place some protect on under all legs to stop
the bed frame from mov ng. If th s s not adhered to there s no guarantee f the bed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000159
Page 2 of 4
Parts L st Hardware L st (found n box 1)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Headend 1 1 A ¼ “ x 100 mm Bolt 8
2 Footend 1 1 B Elliptical Nut 8
3 Side Rail 2 2 C 7 x 90 mm Bolt 4
4 Slat 1 12 D 8 x 35 mm Wooden Dowel 6
5 Plinth 2 2 E 10 x 50 mm Wooden Dowel 4
6 Centre Rail 2 1 F 4 x 30 mm Screw 24
** You w ll need a small mallet and a
screwdr ver.
G Cam Lock 3
H Locking Bolt 3
I dhesive Covers 3
J llen Key 1
K Spacer Block 2
L
Caps
8
M Bracket 2
N 3.5 x 16 mm Screw 12

Vendor: S000159
Page 3 of 4
Step 1: ttach a plinth (5) to the headend (1) using hardware parts C and D and the llen key provided, then
attach hardware part M using hardware part N and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 2: ttach the remaining plinth (5) to the footend (2) using hardware parts D, G, H and I, then attach
hardware part M using hardware part N and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 3: ttach the side rails (3) to the headend (1) and footend (2) using hardware parts , B, E and L with
the llen key provided, then fix the centre rail (6) into position using hardware part N and a screwdriver (not
provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000159
Page 4 of 4
Step 4: Fix the slats (4) into position whilst applying pressure to both side rails (3) using hardware parts F and
K and a screwdriver (not provided).
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.