Birlea RHODES User manual

Vendor: S000053
Page 1 of 6
ASSEMBLY INSTRUCTIONS
RHODES BUNK BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR RHODES BUNK
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
Be aware of the danger of young children (under 6) falling from the upper bunk. It is not advisable for
children under the age of 6 to sleep on the top bunk.
This bed frame complies to EN 747 – 1&2 (2012).
CAUTION: There is the risk f strangulati n t children fr m items such as string, r pes, c rds, harnesses and
belts hanging fr m the bed frame.
WARNING: Children can bec me trapped between the bed and the wall. T av id risk f seri us injuries please
be aware f the distance between the wall and the t p safety barrier.
WARNING: If this bed is placed n a n n-carpeted fl r y u must place s me pr tecti n under all legs t st p
the bed frame fr m m ving. If this is n t adhered t there is n guarantee if the bed frame c llapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
Recommended maximum mattress height for top bunk is 200 mm.
www.birlea.com

Vendor: S000053
Page 2 of 6
Parts List Hardware List
Part Descripti n Qty Part Descripti n Qty
1 Bed Post (Left & Right) 4 A M6 x 16 mm JCBC Screw 16
2 Head/Footend Frame 4 B B203 - 50 mm Black Round Stopper 8
3 Bottom Base (with sticker) 1 C M6 x 80 mm JCBC Screw 16
4 Head/Footend Connector 4 D M6 x 45 mm JCBC Screw 3
5 Top Base (with sticker) 1 E M6 Nut 4
6 Back Rail 1 F M6 x 50 mm JCBC Screw 1
7 Front Rail 1 G M6 x 60 mm JCBC Screw 5
8 Ladder 1 H B204 - 50 mm Black Round Cap 8
** M4 Allen Key pr vided. I M6 x 70 mm JCBC Screw
3
Step 1: Fix the headend/footend frames (2) to the bed posts (1) using hardware part then insert hardware
part B to the bottom frame.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 3 of 6
Step 2: ssemble the bottom base (3) using hardware part C but do not tighten the screws fully yet.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 3: Place the headend connectors (4) between the headend/footend frames.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 4 of 6
Step 4: ssemble the top base (4) using hardware part C but do not fully tighten yet.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 5: ttach the back rail (6) and front rail (7) to the headend frames using hardware parts G and I. For
easier assembly, secure hardware part G before proceeding with hardware part I.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 5 of 6
Step 6: ttach the ladder (8) using hardware parts D, E and F.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Step 7: Insert hardware part H and tighten all screws.
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.

Vendor: S000053
Page 6 of 6
Step 8: This bed can be converted into two single beds
DO NOT use any p wer t ls as this may damage the frame and will invalidate any claim.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.