Birlea Santiago 6 Drawer Chest User manual

Page 1 of 9
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT use this item if any parts are missing, damaged or worn.
DO NOT use this item unless all fixings are secured.
Please keep small parts out of reach of children.
Always use on a level, even surface.
t is recommended that two people handle and assemble the item
CARE & MAINTENANCE:
Assemble in the room of use.
To avoid damages assemble the item on a soft, clean surface
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the item as this will damage the base.
Always lift the item with two people to reposition.
Keep any sharp objects away from the item.
This product is manufactured in pine which is a wood with natural characteristics including knots, grains,
clusters or indentations
On unpacking the item you may notice an odour due to production processes but this will disappear after a
period of time.
DO NOT place the item next to a radiator or direct sunlight – this item is susceptible to temperature change.
t is recommended an even room temperature be maintained with no sudden fluctuations.
DO NOT place hot or cold items directly onto the surface of the item as marking will occur
For general cleaning use a duster or damp cloth (almost dry) not wet – do not use soap and water,
detergents, aerosol sprays or any polish as use of these materials would invalidate any claims.
DO NOT place the item onto wet or damp flooring as staining may occur to the floor
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING 6 DRAWER CHEST.
ASSEMBLY INSTRUCTIONS
6 DRAWER CHEST

Page 2 of 9
Parts List Har ware List
Part Description Qty Part Description Qty
1 Top Panel 1 A Wooden Dowel 57
2 Right Panel 1 B 14 mm Screw 4
3 Left Panel 1 C 30 mm Screw
72
4 Right Front Frame 1 D 35 mm Screw 42
5 Left Front Frame 1 E 19 mm Bolt 6
6 Front Frame 2 F
Handle
6
7 Middle Front Frame 1 G Tack 32
8 Rear Base Plinth 1 ** You will need a small mallet and a screwdriver.
9 Back Column 1
10 Back Panel 2
11 Spine 2
12 Drawer Front 6
13 Drawer Side 12
14 Drawer Back 6
15 Drawer Base 6
16 Cleat 4
17 Side Drawer Runner 6
18 Middle Drawer Runner 3

Page 3 of 9
Step 1: nsert the right panel (2) to the right front frame (4) making sure the parts are pushed together and
lined up. Place the cleats (16) between the marks shown and secure using hardware part D and a
screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 4 of 9
Step 2: nsert the left panel (3) to the left front frame (5) making sure the parts are pushed together and
lined up. Place the cleats (16) between the marks shown and secure using hardware part D and a
screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 3: nsert hardware part A using a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 5 of 9
Step 4: Attach the middle drawer runners (18) to the back column (9) using hardware part D and a
screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 5: Connect the front frames (6) to the middle front frame (7).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 6: Attach the right panel (2) and left panel (3) using hardware part B and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 6 of 9
Step 7: Attach the rear base plinth (8) using hardware part D and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 8: Join together the two assembled sections using hardware part D and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 7 of 9
Step 9: Attach the top panel (1) using hardware part D and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 10: Attach the side drawer runners (17) using hardware part D and a screwdriver (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 8 of 9
Step 11: Join the back panels (10) together with the spines (11) and secure in position on the frame using
hardware part G and a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.
Step 12: Assemble the drawer components using hardware parts C, E and F with a screwdriver (not
provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.

Page 9 of 9
Step 13: nsert the assembled drawers and secure using hardware part A and a small mallet (not provided).
DO NOT use any power tools as this may amage the frame an will invali ate any claim.