Birlea KENSINGTON 4’6 BED User manual

Vendor: S000059
Page 1 of 4
ASSEMBLY INSTRUCTIONS
KENSINGTON 4’6 BED
IMPORTANT: READ THESE INSTRUCTIONS CAREFULLY BEFORE ASSEMBLING OR USING YOUR KENSINGTON 4’6
BED FRAME.
PLEASE KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HEALTH & SAFETY:
DO NOT jump on this bed frame.
DO NOT use this bed frame if any parts are missing, damaged or worn.
DO NOT use this bed frame unless all fixings are secured.
Please keep small parts out of reach of children.
lways use on a level, even surface.
WARNING: If th s bed s placed on a non-carpeted floor you must place some protect on under all legs to stop
the bed frame from mov ng. If th s s not adhered to there s no guarantee f the bed frame collapses.
CARE & MAINTENANCE:
ssemble in the room of use.
Periodically check all screws & fixings to ensure they are secure.
DO NOT push the bed frame as this will damage the legs.
lways lift the bed with two people to reposition.
Keep any sharp objects away from the frame.
www.birlea.com

Vendor: S000059
Page 2 of 4
Parts L st Hardware L st (Found n box 2)
Part Descr pt on Box Qty Part Descr pt on Qty
1 Headend 1 1 A M6 x 25 mm JCBC Screw 2
2 Side Rail 3 2 B M6 x 40 mm JCBC Screw 8
3 Footend 2 1 C M4 llen Key 1
4 Centre Rail 3 1 D M5 llen Key 1
5 Slat 2 26 E Double Slat Cap 13
6 Leg 2 4 F Single Slat Cap 26
7 Centre Leg 2 3

Vendor: S000059
Page 3 of 4
Step 1: Insert the legs (6) to the headend (1) and footend (3) and twist until secure.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 2: ttach the side rails (2) to the headend (1) and footend (3) using the pre-inserted screws and
hardware part D.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Step 3: Fix the centre legs (7) to the centre rail (4) using hardware part D. ttach the rail to the headend (1)
and footend (2) using hardware parts and C.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.

Vendor: S000059
Page 4 of 4
Step 4: Fix the slats (5) to the side rails (2) using hardware parts E and F.
DO NOT use any power tools as th s may damage the frame and w ll nval date any cla m.
Additional Information:
• For complete product information, images and dimension diagrams please visit the
website www.birlea.com
• If you have any issues with your item please contact the retailer directly you
purchased it from who will be able to resolve any issues with Birlea.
• Why don’t you send us photos of your assembled furniture to [email protected] to be
shared in our #birleahome feature on Instagram.